[PATCH 0/4] Allow to use leds-ns2 with n090401 boards
Simon Guinot
simon.guinot at sequanux.org
Fri Mar 13 02:44:33 PDT 2015
On Wed, Mar 04, 2015 at 03:52:15PM +0100, Simon Guinot wrote:
> Hello,
>
> This patch series allows to use the leds-ns2 driver with the n090401
> boards (Seagate NAS 4-Bay), based on an Armada-370 SoC.
>
> Here is the list changes:
>
> - Allow to configure the LED mode mapping.
> - Handle can_sleep GPIOs. On n090401, the LEDs are connected to an I2C
> GPIO expander.
> - Make leds-ns2 depends on MACH_ARMADA_370.
Hi Brian,
Please consider applying the leds-ns2 patches of this serie.
Thanks in advance.
Simon
> Simon Guinot (2):
> leds: leds-ns2: handle can_sleep GPIOs
> leds: leds-ns2: depends on MACH_ARMADA_370
>
> Vincent Donnefort (2):
> leds: leds-ns2: move LED modes mapping outside of the driver
> ARM: Kirkwood: add modes-map property to ns2-leds nodes
>
> .../devicetree/bindings/leds/leds-ns2.txt | 9 ++
> arch/arm/boot/dts/kirkwood-d2net.dts | 5 +
> arch/arm/boot/dts/kirkwood-is2.dts | 5 +
> arch/arm/boot/dts/kirkwood-ns2.dts | 5 +
> arch/arm/boot/dts/kirkwood-ns2max.dts | 5 +
> arch/arm/boot/dts/kirkwood-ns2mini.dts | 5 +
> drivers/leds/Kconfig | 12 +-
> drivers/leds/leds-ns2.c | 156 +++++++++++++--------
> include/dt-bindings/leds/leds-ns2.h | 8 ++
> include/linux/platform_data/leds-kirkwood-ns2.h | 14 ++
> 10 files changed, 159 insertions(+), 65 deletions(-)
> create mode 100644 include/dt-bindings/leds/leds-ns2.h
>
> --
> 2.1.1
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 181 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150313/2f153504/attachment.sig>
More information about the linux-arm-kernel
mailing list