[PATCH 1/3] ARM: imx6qdl-sabreauto.dtsi: add max7310 support

[Shawn Guo]

On Fri, Mar 13, 2015 at 10:40:43AM +0800, Peter Chen wrote:
> On Wed, Mar 11, 2015 at 09:46:09AM +0800, Shawn Guo wrote:
> > On Mon, Mar 09, 2015 at 05:28:06PM +0800, Peter Chen wrote:
> > > max7310 is an i2c interface gpio expander
> > > 
> > > Signed-off-by: Peter Chen <peter.chen at freescale.com>
> > > ---
> > >  arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 43 ++++++++++++++++++++++++++++++++
> > >  1 file changed, 43 insertions(+)
> > > 
> > > diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
> > > index 009abd6..51acfec 100644
> > > --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
> > > +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
> > > @@ -28,6 +28,13 @@
> > >  		};
> > >  	};
> > >  
> > > +	max7310_reset: max7310-reset {
> > > +		compatible = "gpio-reset";
> > 
> > The mainline kernel doesn't seem to have a gpio-reset driver/binding
> > yet.
> > 
> 
> Yeah, the driver still handles reset by itself instead of DT.
> Even without reset operation, my max7310 chip works ok.
> Would you accept that I delete this reset operation
> and send v2?

Yes.

Shawn