[PATCH v3 2/4] arm64: dts: Add Qualcomm MSM8916 SoC and evaluation board dts

[Mark Rutland]

> >> +	cpus {
> >> +		#address-cells = <1>;
> >> +		#size-cells = <0>;
> >> +
> >> +		CPU0: cpu at 0 {
> >> +			device_type = "cpu";
> >> +			compatible = "arm,cortex-a53", "arm,armv8";
> >> +			reg = <0x0>;
> >> +		};
> >> +
> >> +		CPU1: cpu at 1 {
> >> +			device_type = "cpu";
> >> +			compatible = "arm,cortex-a53", "arm,armv8";
> >> +			reg = <0x1>;
> >> +		};
> >> +
> >> +		CPU2: cpu at 2 {
> >> +			device_type = "cpu";
> >> +			compatible = "arm,cortex-a53", "arm,armv8";
> >> +			reg = <0x2>;
> >> +		};
> >> +
> >> +		CPU3: cpu at 3 {
> >> +			device_type = "cpu";
> >> +			compatible = "arm,cortex-a53", "arm,armv8";
> >> +			reg = <0x3>;
> >> +		};
> >> +	};
> > 
> > The secondary CPUs need an enable-method. Are you using PSCI or
> > spin-table?
> 
> This is on purpose.  We aren’t using either PSCI or spin-table.  Right
> now the dts is for booting on a single core.  I can drop CPU1..CPU3 if
> that helps.

We won't poke the CPUs without an enable-method, so personally I'm not
too worried either way about having the CPUs listed.

Which of spin-table/psci are you planning on using for SMP support, and
when would that be likely to appear?

Which exception level do CPUs enter the kernel? Even without a
virt-capable GIC booting at EL2 is less work for the FW and gives the
kernel a better chance of fixing things up (e.g. CNTVOFF).

Thanks,
Mark.