[RFC V2 04/12] i2c: opal: make use of the new infrastructure for quirks
Neelesh Gupta
neelegup at linux.vnet.ibm.com
Tue Mar 10 21:26:20 PDT 2015
On 03/11/2015 04:42 AM, Benjamin Herrenschmidt wrote:
> On Tue, 2015-03-10 at 22:43 +0530, Neelesh Gupta wrote:
>> I tested the i2c opal driver after updating the patch as below.
>> Basically I think we can also support write-then-{read/write}
>> for the number of messages = 2.
>> Ben, any issues if we support both write plus read/write in the
>> opal driver ?
> Nope, in fact it's a good idea, I found myself having to expoes such
> an interface to some userspace tool of ours.
>
> However...
>
>> diff --git a/drivers/i2c/busses/i2c-opal.c b/drivers/i2c/busses/i2c-opal.c
>> index 16f90b1..85412ba 100644
>> --- a/drivers/i2c/busses/i2c-opal.c
>> +++ b/drivers/i2c/busses/i2c-opal.c
>> @@ -104,18 +104,8 @@ static int i2c_opal_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
>> req.buffer_ra = cpu_to_be64(__pa(msgs[0].buf));
>> break;
>> case 2:
>> - /* For two messages, we basically support only simple
>> - * smbus transactions of a write plus a read. We might
>> - * want to allow also two writes but we'd have to bounce
>> - * the data into a single buffer.
>> - */
>> - if ((msgs[0].flags & I2C_M_RD) || !(msgs[1].flags & I2C_M_RD))
>> - return -EOPNOTSUPP;
> Don't we still want to enforce that the first message is a write ?
> Somebody may not be looking at the quirks...
>
>> - if (msgs[0].len > 4)
>> - return -EOPNOTSUPP;
> And that the len is supported...
>
>> - if (msgs[0].addr != msgs[1].addr)
>> - return -EOPNOTSUPP;
> Same...
>
> Ie, the quirk indicates to the callers what we support, but we should
> still check that we aren't called with something that doesn't match.
Quirk *also* return error to the user if any of the conditions mismatch with
what we have indicated through the quriks structure...
I think we can't land up here by-passing the check for quirks so above
checks
are duplicated here..
Neelesh.
>
>> - req.type = OPAL_I2C_SM_READ;
>> + req.type = (msgs[1].flags & I2C_M_RD) ?
>> + OPAL_I2C_SM_READ : OPAL_I2C_SM_WRITE;
>> req.addr = cpu_to_be16(msgs[0].addr);
>> req.subaddr_sz = msgs[0].len;
>> for (i = 0; i < msgs[0].len; i++)
>> @@ -210,6 +200,11 @@ static const struct i2c_algorithm i2c_opal_algo = {
>> .functionality = i2c_opal_func,
>> };
>>
>> +static struct i2c_adapter_quirks i2c_opal_quirks = {
>> + .flags = I2C_AQ_COMB | I2C_AQ_COMB_WRITE_FIRST | I2C_AQ_COMB_SAME_ADDR,
>> + .max_comb_1st_msg_len = 4,
>> +};
>> +
>> static int i2c_opal_probe(struct platform_device *pdev)
>> {
>> struct i2c_adapter *adapter;
>> @@ -232,6 +227,7 @@ static int i2c_opal_probe(struct platform_device *pdev)
>>
>> adapter->algo = &i2c_opal_algo;
>> adapter->algo_data = (void *)(unsigned long)opal_id;
>> + adapter->quirks = &i2c_opal_quirks;
>> adapter->dev.parent = &pdev->dev;
>> adapter->dev.of_node = of_node_get(pdev->dev.of_node);
>> pname = of_get_property(pdev->dev.of_node, "ibm,port-name", NULL);
>>
>>
>>
>> On 02/25/2015 09:31 PM, Wolfram Sang wrote:
>>> From: Wolfram Sang <wsa+renesas at sang-engineering.com>
>>>
>>> Signed-off-by: Wolfram Sang <wsa+renesas at sang-engineering.com>
>>> ---
>>> drivers/i2c/busses/i2c-opal.c | 22 +++++++++++-----------
>>> 1 file changed, 11 insertions(+), 11 deletions(-)
>>>
>>> diff --git a/drivers/i2c/busses/i2c-opal.c b/drivers/i2c/busses/i2c-opal.c
>>> index 16f90b1a750894..b2788ecad5b3cb 100644
>>> --- a/drivers/i2c/busses/i2c-opal.c
>>> +++ b/drivers/i2c/busses/i2c-opal.c
>>> @@ -104,17 +104,6 @@ static int i2c_opal_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
>>> req.buffer_ra = cpu_to_be64(__pa(msgs[0].buf));
>>> break;
>>> case 2:
>>> - /* For two messages, we basically support only simple
>>> - * smbus transactions of a write plus a read. We might
>>> - * want to allow also two writes but we'd have to bounce
>>> - * the data into a single buffer.
>>> - */
>>> - if ((msgs[0].flags & I2C_M_RD) || !(msgs[1].flags & I2C_M_RD))
>>> - return -EOPNOTSUPP;
>>> - if (msgs[0].len > 4)
>>> - return -EOPNOTSUPP;
>>> - if (msgs[0].addr != msgs[1].addr)
>>> - return -EOPNOTSUPP;
>>> req.type = OPAL_I2C_SM_READ;
>>> req.addr = cpu_to_be16(msgs[0].addr);
>>> req.subaddr_sz = msgs[0].len;
>>> @@ -210,6 +199,16 @@ static const struct i2c_algorithm i2c_opal_algo = {
>>> .functionality = i2c_opal_func,
>>> };
>>>
>>> +/* For two messages, we basically support only simple
>>> + * smbus transactions of a write plus a read. We might
>>> + * want to allow also two writes but we'd have to bounce
>>> + * the data into a single buffer.
>>> + */
>>> +static struct i2c_adapter_quirks i2c_opal_quirks = {
>>> + .flags = I2C_AQ_COMB_WRITE_THEN_READ,
>>> + .max_comb_1st_msg_len = 4,
>>> +};
>>> +
>>> static int i2c_opal_probe(struct platform_device *pdev)
>>> {
>>> struct i2c_adapter *adapter;
>>> @@ -232,6 +231,7 @@ static int i2c_opal_probe(struct platform_device *pdev)
>>>
>>> adapter->algo = &i2c_opal_algo;
>>> adapter->algo_data = (void *)(unsigned long)opal_id;
>>> + adapter->quirks = &i2c_opal_quirks;
>>> adapter->dev.parent = &pdev->dev;
>>> adapter->dev.of_node = of_node_get(pdev->dev.of_node);
>>> pname = of_get_property(pdev->dev.of_node, "ibm,port-name", NULL);
>
More information about the linux-arm-kernel
mailing list