[PATCH 1/2] ARM: imx6qdl-sabresd: set swbst_reg as vbus's parent reg

[Shawn Guo]

On Fri, Mar 06, 2015 at 04:04:20PM +0800, Peter Chen wrote:
> USB vbus 5V is from PMIC SWBST, so set swbst_reg as vbus's
> parent reg, it fixed a bug that the voltage of vbus is incorrect
> due to swbst_reg is disabled after boots up.
> 
> Cc: stable <stable at vger.kernel.org>

It's more idiomatic to put the line in this way:

Cc: stable at vger.kernel.org

Changed it and applied both patches.

Shawn

> Signed-off-by: Peter Chen <peter.chen at freescale.com>
> ---
>  arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
> index f1cd214..a626e6d 100644
> --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
> @@ -35,6 +35,7 @@
>  			regulator-max-microvolt = <5000000>;
>  			gpio = <&gpio3 22 0>;
>  			enable-active-high;
> +			vin-supply = <&swbst_reg>;
>  		};
>  
>  		reg_usb_h1_vbus: regulator at 1 {
> @@ -45,6 +46,7 @@
>  			regulator-max-microvolt = <5000000>;
>  			gpio = <&gpio1 29 0>;
>  			enable-active-high;
> +			vin-supply = <&swbst_reg>;
>  		};
>  
>  		reg_audio: regulator at 2 {
> -- 
> 1.9.1
>