[PATCH] dma: Add Xilinx ZDMA device tree Binding Documentation
soren.brinkmann at xilinx.com
Tue Mar 10 17:01:26 PDT 2015
On Tue, 2015-03-10 at 07:46PM +0530, Punnaiah Choudary Kalluri wrote:
> Device-tree binding documentation for Xilinx ZDMA Engine
> Signed-off-by: Punnaiah Choudary Kalluri <punnaia at xilinx.com>
> .../devicetree/bindings/dma/xilinx/zdma.txt | 76 ++++++++++++++++++++
> 1 files changed, 76 insertions(+), 0 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/dma/xilinx/zdma.txt
> diff --git a/Documentation/devicetree/bindings/dma/xilinx/zdma.txt b/Documentation/devicetree/bindings/dma/xilinx/zdma.txt
> new file mode 100644
> index 0000000..399a3bc
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/dma/xilinx/zdma.txt
> @@ -0,0 +1,76 @@
> +Xilinx ZDMA engine, it does support memory to memory transfers,
> +memory to device and device to memory transfers. It also has flow
> +control and rate control support for slave/peripheral dma access.
> +Xilinx ZynqMP has two instances of general purpose DMA(ZDMA).
> +one is located in FPD(full power domain) and other is located in
> +LPD(low power domain).
> +ZDMA instance located in FPD is referred as FPDMA and instance located
> +in LPD is referred as LPDMA.
> +FPDMA is configured with 8 DMA channels and AXI bus width is 128 byte.
> +LPDMA is configured with 8 DMA channels and AXI bus width is 64 byte.
All these implementation details are good background information, but
shouldn't be part of the binding.
More information about the linux-arm-kernel