[PATCH v7 0/8] imx25 adc and touchscreen driver
mpa at pengutronix.de
Mon Mar 9 02:24:41 PDT 2015
On Sat, Mar 07, 2015 at 06:24:09PM +0000, Jonathan Cameron wrote:
> On 03/03/15 07:58, Markus Pargmann wrote:
> > Hi,
> > This series adds a driver for the Freescale i.MX25 SoC internal ADC unit which
> > is used for touchscreen and ADC. The driver consists of three parts, the MFD
> > driver which handles interrupts and some central configuration registers, the
> > ADC driver and the touchscreen driver.
> > v7 has some modifications in the probe functions to use devres irq requests.
> > irq checks were fixed to check for irqs <= 0. The header was cleaned up to have
> > a more uniform presentation of the bit fields. Detailed changelogs are attached
> > to the according mails.
> > Best Regards,
> > Markus
> Almost there as far as I am concerned. Just that one unbalanced regulator_enable
> that needs dealing with. The bindings are pretty simple so whilst a device-tree
> ack would of course be great I guess it could be taken without.
> This wants to go via mfd or I suppose the freescale/arm-soc tree. Either is fine
> with me.
Thanks for your review. I will fix the missing parts.
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
-------------- next part --------------
A non-text attachment was scrubbed...
Size: 819 bytes
Desc: Digital signature
More information about the linux-arm-kernel