[PATCH 5/5] dts: mt8173: Add iommu/smi nodes for mt8173

Daniel Kurtz djkurtz at chromium.org
Sat Mar 7 07:20:34 PST 2015


Hi Yong,

On Fri, Mar 6, 2015 at 6:48 PM,  <yong.wu at mediatek.com> wrote:
> From: Yong Wu <yong.wu at mediatek.com>
>
> This patch add the iommu/larbs nodes for mt8173
>
> Signed-off-by: Yong Wu <yong.wu at mediatek.com>
> ---
>  arch/arm64/boot/dts/mediatek/mt8173.dtsi      |  60 ++++++++++++
>  include/dt-bindings/iommu/mt8173-iommu-port.h | 127 ++++++++++++++++++++++++++
>  2 files changed, 187 insertions(+)
>  create mode 100644 include/dt-bindings/iommu/mt8173-iommu-port.h
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> index c2a057f..805a7cd 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> @@ -16,6 +16,7 @@
>  #include <dt-bindings/reset-controller/mt8173-resets.h>
>  #include "mt8173-pinfunc.h"
>  #include <dt-bindings/clock/mt8173-clk.h>
> +#include <dt-bindings/iommu/mt8173-iommu-port.h>
>
>  / {
>         compatible = "mediatek,mt8173";
> @@ -249,6 +250,65 @@
>                         interrupts = <0 86 8>;
>                         clocks = <&uart_clk>;
>                 };
> +
> +               iommu: mmsys_iommu at 10205000 {
> +                       compatible = "mediatek,mt8173-iommu";
> +                       reg = <0 0x10205000 0 0x1000>;
> +                       interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_LOW>;
> +                       clocks = <&infrasys INFRA_M4U>;
> +                       clock-names = "infra_m4u";
> +                       larb = <&larb0 &larb1 &larb2 &larb3 &larb4 &larb5>;
> +                       #iommu-cells = <1>;
> +               };
> +
> +               larb0:larb at 14021000 {
> +                       compatible = "mediatek,mt8173-smi-larb";
> +                       reg = <0 0x14021000 0 0x1000>;
> +                       clocks = <&mmsys MM_SMI_COMMON>, <&mmsys MM_SMI_LARB0>;
> +                       clock-names = "larb_sub0", "larb_sub1";
> +               };
> +
> +               larb1:larb at 16010000 {
> +                       compatible = "mediatek,mt8173-smi-larb";
> +                       reg = <0 0x16010000 0 0x1000>;
> +                       clocks = <&mmsys MM_SMI_COMMON>,
> +                                       <&vdecsys VDEC_CKEN>,
> +                                       <&vdecsys VDEC_LARB_CKEN>;
> +                       clock-names = "larb_sub0", "larb_sub1", "larb_sub2";
> +               };
> +
> +               larb2:larb at 16010000 {

I think this one should be:
   larb2: larb at 15001000 {

Also, I am not a devicetree expert, but I believe nodes are usually
arranged in register order.
If that is the case, the order, as unfortunate as this looks, should be:

 larb0: larb at 14021000
 larb4: larb at 14027000
 larb2: larb at 15001000
 larb1: larb at 16010000
 larb3: larb at 18001000
 larb5: larb at 19001000

-Dan


> +                       compatible = "mediatek,mt8173-smi-larb";
> +                       reg = <0 0x15001000 0 0x1000>;
> +                       clocks = <&mmsys MM_SMI_COMMON>,
> +                                       <&imgsys IMG_LARB2_SMI>;
> +                       clock-names = "larb_sub0", "larb_sub1";
> +               };
> +
> +               larb3:larb at 18001000 {
> +                       compatible = "mediatek,mt8173-smi-larb";
> +                       reg = <0 0x18001000 0 0x1000>;
> +                       clocks = <&mmsys MM_SMI_COMMON>,
> +                                       <&vencsys VENC_CKE0>,
> +                                       <&vencsys VENC_CKE1>;
> +                       clock-names = "larb_sub0", "larb_sub1", "larb_sub2";
> +               };
> +
> +               larb4:larb at 14027000 {
> +                       compatible = "mediatek,mt8173-smi-larb";
> +                       reg = <0 0x14027000 0 0x1000>;
> +                       clocks = <&mmsys MM_SMI_COMMON>, <&mmsys MM_SMI_LARB4>;
> +                       clock-names = "larb_sub0", "larb_sub1";
> +               };
> +
> +               larb5:larb at 19001000 {
> +                       compatible = "mediatek,mt8173-smi-larb";
> +                       reg = <0 0x19001000 0 0x1000>;
> +                       clocks = <&mmsys MM_SMI_COMMON>,
> +                                       <&vencltsys VENCLT_CKE0>,
> +                                       <&vencltsys VENCLT_CKE1>;
> +                       clock-names = "larb_sub0", "larb_sub1", "larb_sub2";
> +               };
>         };
>
>  };
> diff --git a/include/dt-bindings/iommu/mt8173-iommu-port.h b/include/dt-bindings/iommu/mt8173-iommu-port.h
> new file mode 100644
> index 0000000..e9e6569
> --- /dev/null
> +++ b/include/dt-bindings/iommu/mt8173-iommu-port.h
> @@ -0,0 +1,127 @@
> +/*
> + * Copyright (c) 2014-2015 MediaTek Inc.
> + * Author: Yong Wu <yong.wu at mediatek.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +#ifndef __DTS_IOMMU_PORT_MT8173_H
> +#define __DTS_IOMMU_PORT_MT8173_H
> +
> +#define M4U_LARB0_PORT(n)      ((n) + 0)
> +#define M4U_LARB1_PORT(n)      ((n) + 8)
> +#define M4U_LARB2_PORT(n)      ((n) + 17)
> +#define M4U_LARB3_PORT(n)      ((n) + 38)
> +#define M4U_LARB4_PORT(n)      ((n) + 53)
> +#define M4U_LARB5_PORT(n)      ((n) + 59)
> +#define M4U_PERISYS_PORT(n)    ((n) + 68)
> +
> +/* larb0 */
> +#define        M4U_PORT_DISP_OVL0    M4U_LARB0_PORT(0)
> +#define        M4U_PORT_DISP_RDMA0   M4U_LARB0_PORT(1)
> +#define        M4U_PORT_DISP_WDMA0   M4U_LARB0_PORT(2)
> +#define        M4U_PORT_DISP_OD_R    M4U_LARB0_PORT(3)
> +#define        M4U_PORT_DISP_OD_W    M4U_LARB0_PORT(4)
> +#define        M4U_PORT_MDP_RDMA0    M4U_LARB0_PORT(5)
> +#define        M4U_PORT_MDP_WDMA     M4U_LARB0_PORT(6)
> +#define        M4U_PORT_MDP_WROT0    M4U_LARB0_PORT(7)
> +
> +/* larb1 */
> +#define        M4U_PORT_HW_VDEC_MC_EXT       M4U_LARB1_PORT(0)
> +#define        M4U_PORT_HW_VDEC_PP_EXT       M4U_LARB1_PORT(1)
> +#define        M4U_PORT_HW_VDEC_UFO_EXT      M4U_LARB1_PORT(2)
> +#define        M4U_PORT_HW_VDEC_VLD_EXT      M4U_LARB1_PORT(3)
> +#define        M4U_PORT_HW_VDEC_VLD2_EXT     M4U_LARB1_PORT(4)
> +#define        M4U_PORT_HW_VDEC_AVC_MV_EXT   M4U_LARB1_PORT(5)
> +#define        M4U_PORT_HW_VDEC_PRED_RD_EXT  M4U_LARB1_PORT(6)
> +#define        M4U_PORT_HW_VDEC_PRED_WR_EXT  M4U_LARB1_PORT(7)
> +#define        M4U_PORT_HW_VDEC_PPWRAP_EXT   M4U_LARB1_PORT(8)
> +
> +/* larb2 */
> +#define        M4U_PORT_IMGO      M4U_LARB2_PORT(0)
> +#define        M4U_PORT_RRZO      M4U_LARB2_PORT(1)
> +#define        M4U_PORT_AAO       M4U_LARB2_PORT(2)
> +#define        M4U_PORT_LCSO      M4U_LARB2_PORT(3)
> +#define        M4U_PORT_ESFKO     M4U_LARB2_PORT(4)
> +#define        M4U_PORT_IMGO_D    M4U_LARB2_PORT(5)
> +#define        M4U_PORT_LSCI      M4U_LARB2_PORT(6)
> +#define        M4U_PORT_LSCI_D    M4U_LARB2_PORT(7)
> +#define        M4U_PORT_BPCI      M4U_LARB2_PORT(8)
> +#define        M4U_PORT_BPCI_D    M4U_LARB2_PORT(9)
> +#define        M4U_PORT_UFDI      M4U_LARB2_PORT(10)
> +#define        M4U_PORT_IMGI      M4U_LARB2_PORT(11)
> +#define        M4U_PORT_IMG2O     M4U_LARB2_PORT(12)
> +#define        M4U_PORT_IMG3O     M4U_LARB2_PORT(13)
> +#define        M4U_PORT_VIPI      M4U_LARB2_PORT(14)
> +#define        M4U_PORT_VIP2I     M4U_LARB2_PORT(15)
> +#define        M4U_PORT_VIP3I     M4U_LARB2_PORT(16)
> +#define        M4U_PORT_LCEI      M4U_LARB2_PORT(17)
> +#define        M4U_PORT_RB        M4U_LARB2_PORT(18)
> +#define        M4U_PORT_RP        M4U_LARB2_PORT(19)
> +#define        M4U_PORT_WR        M4U_LARB2_PORT(20)
> +
> +/* larb3 */
> +#define        M4U_PORT_VENC_RCPU         M4U_LARB3_PORT(0)
> +#define        M4U_PORT_VENC_REC          M4U_LARB3_PORT(1)
> +#define        M4U_PORT_VENC_BSDMA        M4U_LARB3_PORT(2)
> +#define        M4U_PORT_VENC_SV_COMV      M4U_LARB3_PORT(3)
> +#define        M4U_PORT_VENC_RD_COMV      M4U_LARB3_PORT(4)
> +#define        M4U_PORT_JPGENC_RDMA       M4U_LARB3_PORT(5)
> +#define        M4U_PORT_JPGENC_BSDMA      M4U_LARB3_PORT(6)
> +#define        M4U_PORT_JPGDEC_WDMA       M4U_LARB3_PORT(7)
> +#define        M4U_PORT_JPGDEC_BSDMA      M4U_LARB3_PORT(8)
> +#define        M4U_PORT_VENC_CUR_LUMA     M4U_LARB3_PORT(9)
> +#define        M4U_PORT_VENC_CUR_CHROMA   M4U_LARB3_PORT(10)
> +#define        M4U_PORT_VENC_REF_LUMA     M4U_LARB3_PORT(11)
> +#define        M4U_PORT_VENC_REF_CHROMA   M4U_LARB3_PORT(12)
> +#define        M4U_PORT_VENC_NBM_RDMA     M4U_LARB3_PORT(13)
> +#define        M4U_PORT_VENC_NBM_WDMA     M4U_LARB3_PORT(14)
> +
> +/* larb4 */
> +#define        M4U_PORT_DISP_OVL1        M4U_LARB4_PORT(0)
> +#define        M4U_PORT_DISP_RDMA1       M4U_LARB4_PORT(1)
> +#define        M4U_PORT_DISP_RDMA2       M4U_LARB4_PORT(2)
> +#define        M4U_PORT_DISP_WDMA1       M4U_LARB4_PORT(3)
> +#define        M4U_PORT_MDP_RDMA1        M4U_LARB4_PORT(4)
> +#define        M4U_PORT_MDP_WROT1        M4U_LARB4_PORT(5)
> +
> +/* larb5 */
> +#define        M4U_PORT_VENC_RCPU_SET2         M4U_LARB5_PORT(0)
> +#define        M4U_PORT_VENC_REC_FRM_SET2      M4U_LARB5_PORT(1)
> +#define        M4U_PORT_VENC_REF_LUMA_SET2     M4U_LARB5_PORT(2)
> +#define        M4U_PORT_VENC_REC_CHROMA_SET2   M4U_LARB5_PORT(3)
> +#define        M4U_PORT_VENC_BSDMA_SET2        M4U_LARB5_PORT(4)
> +#define        M4U_PORT_VENC_CUR_LUMA_SET2     M4U_LARB5_PORT(5)
> +#define        M4U_PORT_VENC_CUR_CHROMA_SET2   M4U_LARB5_PORT(6)
> +#define        M4U_PORT_VENC_RD_COMA_SET2      M4U_LARB5_PORT(7)
> +#define        M4U_PORT_VENC_SV_COMA_SET2      M4U_LARB5_PORT(8)
> +
> +/* perisys iommu */
> +#define        M4U_PORT_RESERVE      M4U_PERISYS_PORT(0)
> +#define        M4U_PORT_SPM          M4U_PERISYS_PORT(1)
> +#define        M4U_PORT_MD32         M4U_PERISYS_PORT(2)
> +#define        M4U_PORT_PTP_THERM    M4U_PERISYS_PORT(3)
> +#define        M4U_PORT_PWM          M4U_PERISYS_PORT(4)
> +#define        M4U_PORT_MSDC1        M4U_PERISYS_PORT(5)
> +#define        M4U_PORT_MSDC2        M4U_PERISYS_PORT(6)
> +#define        M4U_PORT_SPI0         M4U_PERISYS_PORT(7)
> +#define        M4U_PORT_NFI          M4U_PERISYS_PORT(8)
> +#define        M4U_PORT_AUDIO        M4U_PERISYS_PORT(9)
> +#define        M4U_PORT_RESERVED2    M4U_PERISYS_PORT(10)
> +#define        M4U_PORT_HSIC_XHCI    M4U_PERISYS_PORT(11)
> +
> +#define        M4U_PORT_HSIC_MAS     M4U_PERISYS_PORT(12)
> +#define        M4U_PORT_HSIC_DEV     M4U_PERISYS_PORT(13)
> +#define        M4U_PORT_AP_DMA       M4U_PERISYS_PORT(14)
> +#define        M4U_PORT_HSIC_DMA     M4U_PERISYS_PORT(15)
> +#define        M4U_PORT_MSDC0        M4U_PERISYS_PORT(16)
> +#define        M4U_PORT_MSDC3        M4U_PERISYS_PORT(17)
> +
> +#endif
> +
> --
> 1.8.1.1.dirty



More information about the linux-arm-kernel mailing list