[PATCH v2 1/3] net/macb: Update DT bindings documentation

[Nicolas Ferre]

Le 06/03/2015 11:24, Boris Brezillon a écrit :
> Add missing "cdns,at91sam9260-macb", "atmel,sama5d3-gem" and
> "atmel,sama5d4-gem" compatible strings.
> 
> Signed-off-by: Boris Brezillon <boris.brezillon at free-electrons.com>
> Reviewed-by: Alexandre Belloni <alexandre.belloni at free-electrons.com>

Acked-by: Nicolas Ferre <nicolas.ferre at atmel.com>

> ---
>  Documentation/devicetree/bindings/net/macb.txt | 5 ++++-
>  1 file changed, 4 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/net/macb.txt b/Documentation/devicetree/bindings/net/macb.txt
> index aaa6964..ba19d67 100644
> --- a/Documentation/devicetree/bindings/net/macb.txt
> +++ b/Documentation/devicetree/bindings/net/macb.txt
> @@ -2,10 +2,13 @@
>  
>  Required properties:
>  - compatible: Should be "cdns,[<chip>-]{macb|gem}"
> -  Use "cdns,at91sam9260-macb" Atmel at91sam9260 and at91sam9263 SoCs.
> +  Use "cdns,at91sam9260-macb" for Atmel at91sam9 SoCs or the 10/100Mbit IP
> +  available on sama5d3 SoCs.
>    Use "cdns,at32ap7000-macb" for other 10/100 usage or use the generic form: "cdns,macb".
>    Use "cdns,pc302-gem" for Picochip picoXcell pc302 and later devices based on
>    the Cadence GEM, or the generic form: "cdns,gem".
> +  Use "cdns,sama5d3-gem" for the Gigabit IP available on Atmel sama5d3 SoCs.
> +  Use "cdns,sama5d4-gem" for the Gigabit IP available on Atmel sama5d4 SoCs.
>  - reg: Address and length of the register set for the device
>  - interrupts: Should contain macb interrupt
>  - phy-mode: See ethernet.txt file in the same directory.
> 


-- 
Nicolas Ferre