[PATCH v2 08/10] ARM: berlin: rework chip and system controller nodes for BG2

[Antoine Tenart]

The chip and system controller nodes are now handled by the Berlin
controller mfd driver. Its sub-devices are then registered by the mfd
driver and let the drivers be probed properly, using their own
sub-nodes.

Rework the device tree to take this changes into account.

Signed-off-by: Antoine Tenart <antoine.tenart at free-electrons.com>
---
 arch/arm/boot/dts/berlin2.dtsi | 50 ++++++++++++++++++++++++++----------------
 1 file changed, 31 insertions(+), 19 deletions(-)

diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi
index 63d00a63cfa6..fbe5c6b6502d 100644
--- a/arch/arm/boot/dts/berlin2.dtsi
+++ b/arch/arm/boot/dts/berlin2.dtsi
@@ -350,17 +350,25 @@
 			};
 		};
 
-		chip: chip-control at ea0000 {
-			compatible = "marvell,berlin2-chip-ctrl";
-			#clock-cells = <1>;
-			#reset-cells = <2>;
+		chip: chip-controller at ea0000 {
+			compatible = "marvell,berlin2-chip-ctrl", "simple-mfd", "syscon";
 			reg = <0xea0000 0x400>;
+			#clock-cells = <1>;
 			clocks = <&refclk>;
 			clock-names = "refclk";
 
-			emmc_pmux: emmc-pmux {
-				groups = "G26";
-				function = "emmc";
+			soc_pinctrl: pin-controller {
+				compatible = "marvell,berlin2-soc-pinctrl";
+
+				emmc_pmux: emmc-pmux {
+					groups = "G26";
+					function = "emmc";
+				};
+			};
+
+			chip_rst: reset {
+				compatible = "marvell,berlin2-reset";
+				#reset-cells = <2>;
 			};
 		};
 
@@ -442,22 +450,26 @@
 			};
 
 			sysctrl: system-controller at d000 {
-				compatible = "marvell,berlin2-system-ctrl";
+				compatible = "marvell,berlin2-system-ctrl", "simple-mfd", "syscon";
 				reg = <0xd000 0x100>;
 
-				uart0_pmux: uart0-pmux {
-					groups = "GSM4";
-					function = "uart0";
-				};
+				sys_pinctrl: pin-controller {
+					compatible = "marvell,berlin2-system-pinctrl";
 
-				uart1_pmux: uart1-pmux {
-					groups = "GSM5";
-					function = "uart1";
-				};
+					uart0_pmux: uart0-pmux {
+						groups = "GSM4";
+						function = "uart0";
+					};
+
+					uart1_pmux: uart1-pmux {
+						groups = "GSM5";
+						function = "uart1";
+					};
 
-				uart2_pmux: uart2-pmux {
-					groups = "GSM3";
-					function = "uart2";
+					uart2_pmux: uart2-pmux {
+						groups = "GSM3";
+						function = "uart2";
+					};
 				};
 			};
 
-- 
2.3.1