[PATCH 05/24] ARM: OMAP3: dpll3-m2: get rid of obsolete omap2_clksel_round_rate_div call

[Tero Kristo]

Core DVFS support code is currently referencing clksel functionality, which
is wrong. The m2 divisor has been implemented as a divider clock for a long
time already, so replace the validrate check call with proper functionality.
Core DVFS is currently not supported in the kernel so verifying this patch
can be rather tricky, this should probably be fixed at some point.

Signed-off-by: Tero Kristo <t-kristo at ti.com>
---
 arch/arm/mach-omap2/clkt34xx_dpll3m2.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
index eb69acf..825e3da 100644
--- a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
+++ b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
@@ -60,7 +60,9 @@ int omap3_core_dpll_m2_set_rate(struct clk_hw *hw, unsigned long rate,
 	if (!clk || !rate)
 		return -EINVAL;
 
-	validrate = omap2_clksel_round_rate_div(clk, rate, &new_div);
+	new_div = DIV_ROUND_UP(parent_rate, rate);
+	validrate = parent_rate / new_div;
+
 	if (validrate != rate)
 		return -EINVAL;
 
-- 
1.7.9.5