[PATCH v3 0/3] pci: iproc: Add Broadcom iProc PCIe support

[Ray Jui]

This patch series adds the support for Broadcom iProc PCIe controller

pcie-iproc.c servers as the common core driver, and front-end bus
interface needs to be added to support different bus interfaces

pcie-iproc-pltfm.c contains the support for the platform bus interface

Changes from v2:
 - Major rework of the PCIe driver to factor out common generic code from
   front-end bus interface. Support for generic platform bus interface is
   also added
 - Adapt to several new PCI APIs that have been introduced lately

Changes from v1:
 - Add standard PCI interrupt DT properties "#interrupt-cells",
   "interrupt-map-mask" and "interrupt-map" so legacy INTx interrupts can be
   supported by using standard PCI OF IRQ parsing function
 - Get rid of custom IRQ mapping function in the driver. Use
   of_irq_parse_and_map_pci instead

Ray Jui (3):
  pci: iProc: define iProc PCIe platform bus binding
  pci: iproc: Add Broadcom iProc PCIe support
  ARM: dts: enable PCIe support for Cygnus

 .../devicetree/bindings/pci/brcm,iproc-pcie.txt    |   63 ++++
 arch/arm/boot/dts/bcm-cygnus.dtsi                  |   42 +++
 arch/arm/boot/dts/bcm958300k.dts                   |    8 +
 drivers/pci/host/Kconfig                           |   17 +
 drivers/pci/host/Makefile                          |    2 +
 drivers/pci/host/pcie-iproc-pltfm.c                |  101 ++++++
 drivers/pci/host/pcie-iproc.c                      |  337 ++++++++++++++++++++
 drivers/pci/host/pcie-iproc.h                      |   39 +++
 8 files changed, 609 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt
 create mode 100644 drivers/pci/host/pcie-iproc-pltfm.c
 create mode 100644 drivers/pci/host/pcie-iproc.c
 create mode 100644 drivers/pci/host/pcie-iproc.h

-- 
1.7.9.5