[PATCH v2 1/7] ARM: at91: switch to multiplatform
Rob Herring
robherring2 at gmail.com
Thu Mar 5 14:50:57 PST 2015
On Thu, Mar 5, 2015 at 1:17 PM, Alexandre Belloni
<alexandre.belloni at free-electrons.com> wrote:
> Switch AT91 to multiplatform as all SoCs are properly handled.
>
> Signed-off-by: Alexandre Belloni <alexandre.belloni at free-electrons.com>
> ---
> arch/arm/Kconfig | 13 -----
> arch/arm/mach-at91/Kconfig | 117 +++++++++++++++++++++++---------------------
> arch/arm/mach-at91/Makefile | 2 +
> 3 files changed, 62 insertions(+), 70 deletions(-)
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index f6c5b05e8de8..a1d153098001 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -356,19 +356,6 @@ config ARCH_VERSATILE
> help
> This enables support for ARM Ltd Versatile board.
>
> -config ARCH_AT91
> - bool "Atmel AT91"
> - select ARCH_REQUIRE_GPIOLIB
> - select CLKDEV_LOOKUP
> - select IRQ_DOMAIN
> - select PINCTRL
> - select PINCTRL_AT91
> - select SOC_BUS
> - select USE_OF
> - help
> - This enables support for systems based on Atmel
> - AT91RM9200, AT91SAM9 and SAMA5 processors.
> -
> config ARCH_CLPS711X
> bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
> select ARCH_REQUIRE_GPIOLIB
> diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
> index 7ecde7de69da..1b8525c324c3 100644
> --- a/arch/arm/mach-at91/Kconfig
> +++ b/arch/arm/mach-at91/Kconfig
> @@ -1,51 +1,22 @@
> -if ARCH_AT91
> -
> -config HAVE_AT91_UTMI
> - bool
> -
> -config HAVE_AT91_USB_CLK
> - bool
> -
> -config COMMON_CLK_AT91
> - bool
> - select COMMON_CLK
> -
> -config HAVE_AT91_SMD
> - bool
> -
> -config HAVE_AT91_H32MX
> - bool
> -
> -config SOC_SAMA5
> +config ARCH_AT91
> bool
> - select ATMEL_AIC5_IRQ
> + select ARCH_REQUIRE_GPIOLIB
> select COMMON_CLK_AT91
> - select CPU_V7
> + select CLKDEV_LOOKUP
This is already selected by COMMON_CLK I think.
> select GENERIC_CLOCKEVENTS
This is already selected.
> - select MEMORY
> - select ATMEL_SDRAMC
> - select PHYLIB if NETDEVICES
> -
> -menu "Atmel AT91 System-on-Chip"
> -
> -choice
> -
> - prompt "Core type"
> -
> -config SOC_SAM_V4_V5
> - bool "ARM9 AT91SAM9/AT91RM9200"
> - help
> - Select this if you are using one of Atmel's AT91SAM9 or
> - AT91RM9200 SoC.
> -
> -config SOC_SAM_V7
> - bool "Cortex A5"
> + select IRQ_DOMAIN
> + select NEED_MACH_IO_H if PCCARD
This won't work on multi-platform.
> + select PINCTRL
> + select PINCTRL_AT91
> + select SOC_BUS
> + select USE_OF
This is already selected.
> +
> +menuconfig SOC_SAM_V7
> + bool "Atmel SAMA5" if ARCH_MULTI_V7
> + select ARCH_AT91
> help
> - Select this if you are using one of Atmel's SAMA5D3 SoC.
> -
> -endchoice
> -
> -comment "Atmel AT91 Processor"
> + This enables support for systems based on Atmel
> + SAMA5D3 or SAMA5D4 SoCs.
>
> if SOC_SAM_V7
> config SOC_SAMA5D3
> @@ -71,25 +42,29 @@ config SOC_SAMA5D4
> select HAVE_AT91_H32MX
> help
> Select this if you are using one of Atmel's SAMA5D4 family SoC.
> -endif
> +endif # SOC_SAM_V7
> +
> +
> +menuconfig SOC_SAM_V4_V5
> + bool "Atmel ARM9 AT91SAM9/AT91RM9200" if ARCH_MULTI_V4_V5
> + select ARCH_AT91
> + help
> + Select this if you are using one of Atmel's AT91SAM9 or
> + AT91RM9200 SoC.
>
> if SOC_SAM_V4_V5
> config SOC_AT91RM9200
> - bool "AT91RM9200"
> + bool "AT91RM9200" if ARCH_MULTI_V4T
> select ATMEL_AIC_IRQ
> - select COMMON_CLK_AT91
> select CPU_ARM920T
> - select GENERIC_CLOCKEVENTS
> select HAVE_AT91_USB_CLK
> select MIGHT_HAVE_PCI
>
> config SOC_AT91SAM9
> - bool "AT91SAM9"
> + bool "AT91SAM9" if ARCH_MULTI_V5
> select ATMEL_AIC_IRQ
> select ATMEL_SDRAMC
> - select COMMON_CLK_AT91
> select CPU_ARM926T
> - select GENERIC_CLOCKEVENTS
> select HAVE_AT91_SMD
> select HAVE_AT91_USB_CLK
> select HAVE_AT91_UTMI
> @@ -115,6 +90,34 @@ config SOC_AT91SAM9
> AT91SAM9XE
> endif # SOC_SAM_V4_V5
>
> +if ARCH_AT91
> +
> +config HAVE_AT91_UTMI
> + bool
> +
> +config HAVE_AT91_USB_CLK
> + bool
> +
> +config COMMON_CLK_AT91
> + bool
> + select COMMON_CLK
This belongs in drivers/clk.
> +
> +config HAVE_AT91_SMD
> + bool
> +
> +config HAVE_AT91_H32MX
> + bool
> +
> +config SOC_SAMA5
> + bool
> + select ATMEL_AIC5_IRQ
> + select CPU_V7
This is not needed.
> + select MEMORY
> + select ATMEL_SDRAMC
> + select PHYLIB if NETDEVICES
This belongs with your network driver.
> +
> +menu "Atmel AT91 common options"
> +
> comment "AT91 Feature Selections"
>
> config AT91_SLOW_CLOCK
> @@ -132,12 +135,12 @@ config AT91_SLOW_CLOCK
> need to be completely re-initialized.
>
> config AT91_TIMER_HZ
> - int "Kernel HZ (jiffies per second)"
> - range 32 1024
> - depends on ARCH_AT91
> - default "128" if SOC_AT91RM9200
> - default "100"
> - help
> + int "Kernel HZ (jiffies per second)"
How is this multi-platform compatible. This belongs with the
clockevent driver probably.
> + range 32 1024
> + depends on ARCH_AT91
> + default "128" if SOC_AT91RM9200
> + default "100"
> + help
> On AT91rm9200 chips where you're using a system clock derived
> from the 32768 Hz hardware clock, this tick rate should divide
> it exactly: use a power-of-two value, such as 128 or 256, to
> diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
> index 999f12dbdd16..e51170eeaacd 100644
> --- a/arch/arm/mach-at91/Makefile
> +++ b/arch/arm/mach-at91/Makefile
> @@ -1,6 +1,8 @@
> #
> # Makefile for the linux kernel.
> #
> +ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
> +asflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
>
> obj-y := soc.o
>
> --
> 2.1.0
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
More information about the linux-arm-kernel
mailing list