[PATCH] clk: mediatek: Export CPU mux clocks for CPU frequency control

[Sascha Hauer]

On Thu, Mar 05, 2015 at 05:39:12PM +0800, Pi-Cheng Chen wrote:
> On 5 March 2015 at 17:19, Sascha Hauer <s.hauer at pengutronix.de> wrote:
> > On Thu, Mar 05, 2015 at 02:29:50PM +0530, Viresh Kumar wrote:
> >> On 5 March 2015 at 13:12, Sascha Hauer <s.hauer at pengutronix.de> wrote:
> >> > We have clk_set_parent for changing the parent and clk_set_rate to
> >> > change the rate. Use the former for changing the parent and the latter
> >> > for changing the rate. What you are interested in is changing the
> >> > parent, so use clk_set_parent for this and not abuse a side effect
> >> > of clk_set_rate.
> >>
> >> clk_set_rate() for CPUs clock is responsible to change clock rate
> >> of the CPU. Whether it plays with PLLs or muxes, its not that relevant.
> >
> > The sequence to change the CPU frequency on the Mediatek SoCs is like this:
> >
> > - Change CPU from CPU PLL to another clock source (intermediate source)
> > - Change CPU PLL frequency
> > - wait until PLL has settled
> > - switch back to CPU PLL
> >
> > The frequency of the intermediate source is irrelevant, the important
> > thing is that the CPU is switched to this source while the CPU PLL is
> > reconfigured.
> >
> > In Pi-Chengs patches the switch to th eintermediate clock is done like:
> >
> >         rate = clk_get_rate(intermediate_clk);
> >         clk_set_rate(cpu_clk, rate);
> >
> > Now the clk framework does the switch not because it's told to switch
> > to another parent, but only because the other parent happens to be the
> > only provider for that rate. That's rubbish, when the parent must be
> > changed, then it should be done explicitly.
> 
> Hi,
> 
> Please correct me if I was wrong. But I think that's the reason why we have
> a determine_rate hook here, isn't it?
> 
> > What if the CPU PLL and the intermediate clk happen to have the same
> > rate? Then the clk_set_rate above simply does nothing, no parent is
> > changed and the following rate change of the CPU PLL just crashes the
> > system.
> 
> I think what I am trying to do in the determine_rate hook of cpumux is:
> 
> * if the target rate of clk_set_rate is equal to the rate of MAINPLL,
> then switch
>   the mux to MAINPLL
> * otherwise, set the rate directly on ARMPLL and switch the mux back to
>   ARMPLL if the current parent of mux is not ARMPLL
> 
> And if the CPU PLL and the intermediate clk happen to have the same rate,
> I think the cpufreq-dt driver will change nothing on the clk framework. Or do
> I misunderstand your point?

Imagine the board starts with both the CPU PLL and Intermediate PLL
running with the same frequency with the CPU driven from the CPU PLL.
Now the cpufreq driver does it's very first frequency transition. Now
when clk_set_rate is used with the intention to switch to the
intermediate PLL nothing will happen because the CPU PLL already runs
at the desired frequency. Reconfiguring the CPU PLL then crashes your
system.

Another reason why abusing clk_set_rate to change the parent is this:
You have this in your SoC:

            ---
CPU_PLL ---|   |
           |   |
           |   |----- CPU
           |   |
IM_PLL ----|   |
            ---

Now you do a clk_set_rate(CPU, clk_get_rate(IM_PLL)) which (often) works
in your case. Many SoCs have an additional divider though, like this:

            ---
CPU_PLL ---|   |
           |   |   ----
           |   |--| :x | --- CPU
           |   |   ----
IM_PLL ----|   |
            ---

Now clk_set_rate(CPU, clk_get_rate(IM_PLL)) doesn't give anything
sensible anymore.

Given the variance of different SoCs I don't think it makes sense
to try to handle all these cases. Instead the cpufreq-dt driver
should just call clk_set_rate() on the CPU clock with the desired
target frequency. Everything else should be handled in the clock
driver which has intimate knowledge about the SoC anyway.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |