[PATCH] ARM: at91/dt: add uart0 to sama5d3 DT

[Nicolas Ferre]

Le 04/03/2015 17:26, Nicolas Ferre a écrit :
> Signed-off-by: Nicolas Ferre <nicolas.ferre at atmel.com>

Please, forget this patch. It is handled by
arch/arm/boot/dts/sama5d3_uart.dtsi file.

Sorry for the noise ;-)

Bye,


> ---
>  arch/arm/boot/dts/sama5d3.dtsi | 26 ++++++++++++++++++++++++++
>  1 file changed, 26 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
> index e30fee2edd55..def05e20e9d6 100644
> --- a/arch/arm/boot/dts/sama5d3.dtsi
> +++ b/arch/arm/boot/dts/sama5d3.dtsi
> @@ -26,6 +26,7 @@
>  		serial2 = &usart1;
>  		serial3 = &usart2;
>  		serial4 = &usart3;
> +		serial5 = &uart0;
>  		gpio0 = &pioA;
>  		gpio1 = &pioB;
>  		gpio2 = &pioC;
> @@ -206,6 +207,17 @@
>  				status = "disabled";
>  			};
>  
> +			uart0: serial at f0024000 {
> +				compatible = "atmel,at91sam9260-usart";
> +				reg = <0xf0024000 0x100>;
> +				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&pinctrl_uart0>;
> +				clocks = <&uart0_clk>;
> +				clock-names = "usart";
> +				status = "disabled";
> +			};
> +
>  			pwm0: pwm at f002c000 {
>  				compatible = "atmel,sama5d3-pwm";
>  				reg = <0xf002c000 0x300>;
> @@ -764,6 +776,14 @@
>  					};
>  				};
>  
> +				uart0 {
> +					pinctrl_uart0: uart0-0 {
> +						atmel,pins =
> +							<AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE		/* conflicts with PWMFI2, ISI_D8 */
> +							 AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* conflicts with ISI_PCK */
> +					};
> +				};
> +
>  				usart0 {
>  					pinctrl_usart0: usart0-0 {
>  						atmel,pins =
> @@ -1098,6 +1118,12 @@
>  						atmel,clk-output-range = <0 66000000>;
>  					};
>  
> +					uart0_clk: uart0_clk {
> +						#clock-cells = <0>;
> +						reg = <16>;
> +						atmel,clk-output-range = <0 66000000>;
> +					};
> +
>  					twi0_clk: twi0_clk {
>  						reg = <18>;
>  						#clock-cells = <0>;
> 


-- 
Nicolas Ferre