[PATCH] ARM: at91: dts: sama5d3/sama5d4: reduce NFC command registers memory region

[Nicolas Ferre]

Le 15/01/2015 11:05, Boris Brezillon a écrit :
> Hi Josh,
> 
> On Thu, 15 Jan 2015 17:59:15 +0800
> Josh Wu <josh.wu at atmel.com> wrote:
> 
>> Hi， Boris
>>
>> Thanks for the review.
>>
>> On 1/15/2015 4:45 PM, Boris Brezillon wrote:
>>> Hi Josh,
>>>
>>> On Thu, 15 Jan 2015 15:08:03 +0800
>>> Josh Wu <josh.wu at atmel.com> wrote:
>>>
>>>> To get NFC status, we need to read the NFC command registers, which is a
>>>> 256M memory mapping address. To check the status, you just read such
>>>> address from NFC command registers.
>>>> For example, to check NFCBUSY (bit 27), you need to read 0x08000000
>>>> (bit 27 is set to 1) of the NFC command register.
>>>> If you want to check NFCBUSY (bit 27) and NFCWR (bit 26) in same time,
>>>> you need to read 0x0c000000 (bit 27 and bit 26 are set to 1).
>>> Are NFCBUSY and NFCWR found in NFCDATA_STATUS and those found in HSMC_SR
>>> representing the same thing.
>> yes. it is. I just check with IP team. The NFCBUSY of NFCDATA_STATUS is 
>> also refer to NFC_BUSY of HSMC_SR.
>>
>>> If they are, I think you can just use HSMC_SR instead of NFCDATA_STATUS
>>> to check the status [1] and drop the last bit in the NFC Command
>>> Resgiters range.
>> Thank you. your code works (just need some typo change).
>> I want to send [1] code with your signed-off and my acked to mtd list.
>> Is it okay for you?
> 
> Sure, no problem.

Hi Josh,

What is the status of this patch set?

Bye,
-- 
Nicolas Ferre