[PATCH] clk: mediatek: Export CPU mux clocks for CPU frequency control

Sascha Hauer s.hauer at pengutronix.de
Wed Mar 4 03:21:09 PST 2015


On Wed, Mar 04, 2015 at 06:49:11PM +0800, pi-cheng.chen wrote:
> This patch adds CPU mux clocks which are used by Mediatek cpufreq driver
> for intermediate clock source switching. This patch is based on Mediatek
> clock driver patches[1].
> 
> [1] http://thread.gmane.org/gmane.linux.kernel/1892436
> 
> Signed-off-by: pi-cheng.chen <pi-cheng.chen at linaro.org>
> ---
> +static long clk_cpumux_determine_rate(struct clk_hw *hw, unsigned long rate,
> +				      unsigned long min_rate,
> +				      unsigned long max_rate,
> +				      unsigned long *best_parent_rate,
> +				      struct clk_hw **best_parent_p)
> +{
> +	struct clk *clk = hw->clk, *parent;
> +	unsigned long parent_rate;
> +	int i;
> +
> +	for (i = MAINPLL_INDEX; i >= ARMPLL_INDEX; i--) {
> +		parent = clk_get_parent_by_index(clk, i);
> +		if (!parent)
> +			return 0;
> +
> +		if (i == MAINPLL_INDEX) {
> +			parent_rate = __clk_get_rate(parent);
> +			if (parent_rate == rate)
> +				break;
> +		}
> +
> +		parent_rate = __clk_round_rate(parent, rate);
> +	}
> +
> +	*best_parent_rate = parent_rate;
> +	*best_parent_p = __clk_get_hw(parent);
> +	return parent_rate;
> +}

Why this determine_rate hook? If you want to switch the clock to some
intermediate parent I would assume you do this explicitly by setting the
parent and not implicitly by setting a rate.

> +int mtk_clk_register_cpumuxes(struct device_node *node,
> +			      struct mtk_composite *clks, int num,
> +			      struct clk_onecell_data *clk_data)
> +{
> +	int i;
> +	struct clk *clk;
> +	struct regmap *regmap;
> +
> +	if (!clk_data)
> +		return -ENOMEM;
> +
> +	regmap = syscon_node_to_regmap(node);
> +	if (IS_ERR(regmap)) {
> +		pr_err("Cannot find regmap for %s: %ld\n", node->full_name,
> +		       PTR_ERR(regmap));
> +		return PTR_ERR(regmap);
> +	}
> +
> +	for (i = 0; i < num; i++) {
> +		struct mtk_composite *mux = &clks[i];
> +
> +		clk = mtk_clk_register_cpumux(mux->name, mux->parent_names,
> +					      mux->num_parents, regmap,
> +					      mux->mux_reg, mux->mux_shift,
> +					      mux->mux_width);

Pass 'mux' directly instead of dispatching this struct into the
individual fields.
Also, probably better to move this function to
drivers/clk/mediatek/clk-cpumux.c

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |



More information about the linux-arm-kernel mailing list