[PATCH v7 5/7] dt: mb86s7x: add dt files for MB86S7x evbs
Vincent Yang
vincent.cw.yang at gmail.com
Wed Mar 4 03:05:46 PST 2015
From: Jassi Brar <jaswinder.singh at linaro.org>
Add dt files for MB86S7x evb.
Signed-off-by: Andy Green <andy.green at linaro.org>
Signed-off-by: Vincent Yang <vincent.yang at socionext.com>
Signed-off-by: Tetsuya Nuriya <nuriya.tetsuya at socionext.com>
---
arch/arm/boot/dts/Makefile | 3 +
arch/arm/boot/dts/mb86s70.dtsi | 91 +++++++++++++++++++++++++
arch/arm/boot/dts/mb86s70eb.dts | 57 ++++++++++++++++
arch/arm/boot/dts/mb86s73.dtsi | 63 ++++++++++++++++++
arch/arm/boot/dts/mb86s73eb.dts | 44 +++++++++++++
arch/arm/boot/dts/mb86s7x.dtsi | 142 ++++++++++++++++++++++++++++++++++++++++
6 files changed, 400 insertions(+)
create mode 100644 arch/arm/boot/dts/mb86s70.dtsi
create mode 100644 arch/arm/boot/dts/mb86s70eb.dts
create mode 100644 arch/arm/boot/dts/mb86s73.dtsi
create mode 100644 arch/arm/boot/dts/mb86s73eb.dts
create mode 100644 arch/arm/boot/dts/mb86s7x.dtsi
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index a1c776b..aa0e6d4 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -197,6 +197,9 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
kirkwood-ts419-6282.dtb
dtb-$(CONFIG_ARCH_LPC32XX) += \
ea3250.dtb phy3250.dtb
+dtb-$(CONFIG_ARCH_MB86S7X) += \
+ mb86s70eb.dtb \
+ mb86s73eb.dtb
dtb-$(CONFIG_MACH_MESON6) += \
meson6-atv1200.dtb
dtb-$(CONFIG_ARCH_MMP) += \
diff --git a/arch/arm/boot/dts/mb86s70.dtsi b/arch/arm/boot/dts/mb86s70.dtsi
new file mode 100644
index 0000000..057e135
--- /dev/null
+++ b/arch/arm/boot/dts/mb86s70.dtsi
@@ -0,0 +1,91 @@
+/*
+ * Copyright (C) 2013-2015 FUJITSU SEMICONDUCTOR LIMITED
+ * Copyright (C) 2015 Linaro Ltd.
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, version 2 of the License.
+ */
+
+#include "mb86s7x.dtsi"
+
+/ {
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu at 0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x0>;
+ cci-control-port = <&cci_control4>;
+ clock-frequency = <1200000000>;
+ clock-latency = <100000>;
+ };
+
+ cpu1: cpu at 1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x1>;
+ cci-control-port = <&cci_control4>;
+ clock-frequency = <1200000000>;
+ clock-latency = <100000>;
+ };
+
+ cpu2: cpu at 100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x100>;
+ cci-control-port = <&cci_control3>;
+ clock-frequency = <800000000>;
+ clock-latency = <100000>;
+ };
+
+ cpu3: cpu at 101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x101>;
+ cci-control-port = <&cci_control3>;
+ clock-frequency = <800000000>;
+ clock-latency = <100000>;
+ };
+ };
+
+ cci at 2c090000 {
+ compatible = "arm,cci-400";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0 0x2c090000 0x1000>;
+ ranges = <0x0 0x0 0x2c090000 0x10000>;
+
+ cci_control3: slave-if at 4000 {
+ compatible = "arm,cci-400-ctrl-if";
+ interface-type = "ace";
+ reg = <0x4000 0x1000>;
+ };
+
+ cci_control4: slave-if at 5000 {
+ compatible = "arm,cci-400-ctrl-if";
+ interface-type = "ace";
+ reg = <0x5000 0x1000>;
+ };
+
+ pmu at 9000 {
+ compatible = "arm,cci-400-pmu";
+ reg = <0x9000 0x5000>;
+ interrupts = <0 77 4>,
+ <0 77 4>,
+ <0 77 4>,
+ <0 77 4>,
+ <0 77 4>;
+ };
+ };
+};
+
+&archtimer {
+ status = "disabled";
+};
+
+&pmua7 {
+ status = "disabled";
+};
diff --git a/arch/arm/boot/dts/mb86s70eb.dts b/arch/arm/boot/dts/mb86s70eb.dts
new file mode 100644
index 0000000..1e51ce0
--- /dev/null
+++ b/arch/arm/boot/dts/mb86s70eb.dts
@@ -0,0 +1,57 @@
+/*
+ * Copyright (C) 2013-2015 FUJITSU SEMICONDUCTOR LIMITED
+ * Copyright (C) 2015 Linaro Ltd.
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, version 2 of the License.
+ */
+
+/dts-v1/;
+
+#include "mb86s70.dtsi"
+
+/ {
+ model = "Fujitsu MB86S70 EVB";
+ compatible = "fujitsu,mb86s70-evb";
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0 0x80000000 0x80000000>, <0x08 0x80000000 0x80000000>;
+
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200 root=/dev/mmcblk1p1 rootfstype=ext4 rootwait rw";
+ linux,initrd-start = <0xc0000000>;
+ linux,initrd-end = <0xc0800000>;
+ };
+
+ vccq_sdhci1: regulator at 0 {
+ compatible = "regulator-gpio";
+ regulator-name = "SDHCI1 VccQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ gpios = <&gpio0 7 0>;
+ gpios-states = <1>;
+ states = <3300000 1
+ 1800000 0>;
+ };
+};
+
+&sdhci0 {
+ status = "ok";
+ bus-width = <8>;
+};
+
+&sdhci1 {
+ status = "ok";
+ bus-width = <4>;
+ vqmmc-supply = <&vccq_sdhci1>;
+};
diff --git a/arch/arm/boot/dts/mb86s73.dtsi b/arch/arm/boot/dts/mb86s73.dtsi
new file mode 100644
index 0000000..3c9d8d0
--- /dev/null
+++ b/arch/arm/boot/dts/mb86s73.dtsi
@@ -0,0 +1,63 @@
+/*
+ * Copyright (C) 2013-2015 FUJITSU SEMICONDUCTOR LIMITED
+ * Copyright (C) 2015 Linaro Ltd.
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, version 2 of the License.
+ */
+
+#include "mb86s7x.dtsi"
+
+/ {
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu at 100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x100>;
+ cci-control-port = <&cci_control3>;
+ clock-frequency = <800000000>;
+ clock-latency = <100000>;
+ };
+
+ cpu1: cpu at 101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x101>;
+ cci-control-port = <&cci_control3>;
+ clock-frequency = <800000000>;
+ clock-latency = <100000>;
+ };
+ };
+
+ cci at 2c090000 {
+ compatible = "arm,cci-400";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0 0x2c090000 0x1000>;
+ ranges = <0x0 0x0 0x2c090000 0x10000>;
+
+ cci_control3: slave-if at 4000 {
+ compatible = "arm,cci-400-ctrl-if";
+ interface-type = "ace";
+ reg = <0x4000 0x1000>;
+ };
+ };
+
+ hcd21_ehci: f_usb20ho_echi at 34240000 {
+ compatible = "fujitsu,f_usb20ho", "generic-ehci";
+ reg = <0 0x34240000 0x1000>;
+ interrupts = <0 419 0x4>;
+ clocks = <&clock 2 2 4>, <&clock 2 4 5>, <&clock 4 0 0>;
+ };
+
+ hcd21_ohci: f_usb20ho_ochi at 34240000 {
+ compatible = "fujitsu,f_usb20ho", "generic-ohci";
+ reg = <0 0x34241000 0x1000>;
+ interrupts = <0 419 0x4>;
+ clocks = <&clock 2 2 4>, <&clock 2 4 5>, <&clock 4 0 0>;
+ };
+};
diff --git a/arch/arm/boot/dts/mb86s73eb.dts b/arch/arm/boot/dts/mb86s73eb.dts
new file mode 100644
index 0000000..43f2fc6
--- /dev/null
+++ b/arch/arm/boot/dts/mb86s73eb.dts
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 2013-2015 FUJITSU SEMICONDUCTOR LIMITED
+ * Copyright (C) 2015 Linaro Ltd.
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, version 2 of the License.
+ */
+
+/dts-v1/;
+
+#include "mb86s73.dtsi"
+
+/ {
+ model = "Fujitsu MB86S73 EVB";
+ compatible = "fujitsu,mb86s73-evb";
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0 0x80000000 0x80000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200 root=/dev/mmcblk1p1 rootfstype=ext4 rootwait rw";
+ linux,initrd-start = <0xc0000000>;
+ linux,initrd-end = <0xc0800000>;
+ };
+};
+
+&sdhci0 {
+ status = "ok";
+ bus-width = <8>;
+};
+
+&sdhci1 {
+ status = "ok";
+ bus-width = <4>;
+};
diff --git a/arch/arm/boot/dts/mb86s7x.dtsi b/arch/arm/boot/dts/mb86s7x.dtsi
new file mode 100644
index 0000000..4731af1
--- /dev/null
+++ b/arch/arm/boot/dts/mb86s7x.dtsi
@@ -0,0 +1,142 @@
+/*
+ * Copyright (C) 2013-2015 FUJITSU SEMICONDUCTOR LIMITED
+ * Copyright (C) 2015 Linaro Ltd.
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, version 2 of the License.
+ */
+
+#include "skeleton.dtsi"
+
+/ {
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+
+ pmua7: pmu_a7 {
+ compatible = "arm,cortex-a7-pmu";
+ interrupts = <0 18 4>,
+ <0 22 4>;
+ };
+
+ clock: crg11 {
+ compatible = "fujitsu,mb86s70-crg11";
+ #clock-cells = <3>;
+ };
+
+ timer0: timer at 31080000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0 0x31080000 0x1000>;
+ interrupts = <0 324 4>,
+ <0 325 4>;
+ clocks = <&clock 0 6 8>;
+ clock-names = "apb_pclk";
+ };
+
+ archtimer: archtimer {
+ compatible = "arm,armv7-timer";
+ clock-frequency = <125000000>;
+ interrupts = <1 13 0xf08>,
+ <1 14 0xf08>,
+ <1 11 0xf08>,
+ <1 10 0xf08>;
+ };
+
+ gic: interrupt-controller at 2c001000 {
+ compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0 0x2c001000 0x1000>,
+ <0 0x2c002000 0x1000>,
+ <0 0x2c004000 0x2000>,
+ <0 0x2c006000 0x2000>;
+ interrupts = <1 9 0xf04>;
+ };
+
+ mhu: mailbox at 2b1f0000 {
+ #mbox-cells = <1>;
+ compatible = "arm,mhu", "arm,primecell";
+ reg = <0 0x2b1f0000 0x1000>;
+ interrupts = <0 36 4>, /* LP Non-Sec */
+ <0 35 4>, /* HP Non-Sec */
+ <0 37 4>; /* Secure */
+ clocks = <&clock 0 6 8>;
+ clock-names = "apb_pclk";
+ };
+
+ mhu_client: scb at 2e000000 {
+ compatible = "fujitsu,mb86s70-scb-1.0";
+ reg = <0 0x2e000000 0x4000>; /* SHM for IPC */
+ mboxes = <&mhu 1>;
+ };
+
+ uart0: serial at 31040000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0 0x31040000 0x100>;
+ interrupts = <0 320 0x4>;
+ clock-frequency = <62500000>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ clocks = <&clock 0 2 1>;
+ clock-names = "sclk";
+ };
+
+ uart1: serial at 31050000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0 0x31050000 0x100>;
+ interrupts = <0 321 0x4>;
+ clock-frequency = <62500000>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ clocks = <&clock 0 2 1>;
+ clock-names = "sclk";
+ };
+
+ uart2: serial at 31060000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0 0x31060000 0x100>;
+ interrupts = <0 322 0x4>;
+ clock-frequency = <62500000>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ clocks = <&clock 0 2 1>;
+ clock-names = "sclk";
+ };
+
+ gpio0: gpio at 31000000 {
+ compatible = "fujitsu,mb86s70-gpio";
+ reg = <0 0x31000000 0x10000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&clock 0 2 1>;
+ };
+
+ gpio1: gpio at 31010000 {
+ compatible = "fujitsu,mb86s70-gpio";
+ reg = <0 0x31010000 0x10000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&clock 0 2 1>;
+ };
+
+ sdhci0: mmc at 300c0000 {
+ status = "disabled";
+ compatible = "fujitsu,mb86s70-sdhci-3.0";
+ reg = <0 0x300c0000 0x1000>;
+ interrupts = <0 164 0x4>,
+ <0 165 0x4>;
+ clocks = <&clock 0 0xc 0>, <&clock 0 0xb 0>;
+ clock-names = "iface", "core";
+ };
+
+ sdhci1: mmc at 36600000 {
+ status = "disabled";
+ compatible = "fujitsu,mb86s70-sdhci-3.0";
+ reg = <0 0x36600000 0x1000>;
+ interrupts = <0 172 0x4>,
+ <0 173 0x4>;
+ clocks = <&clock 2 0xc 0>, <&clock 2 0xd 0>;
+ clock-names = "iface", "core";
+ };
+};
--
1.9.0
More information about the linux-arm-kernel
mailing list