[PATCH v3 2/2] dma: at_hdmac: Add support for memory to memory sg transfers
Nicolas Ferre
nicolas.ferre at atmel.com
Tue Mar 3 10:29:01 PST 2015
Le 23/02/2015 17:54, Torsten Fleischer a écrit :
> From: Torsten Fleischer <torfl6749 at gmail.com>
>
> This patch adds support for memory to memory scatter-gather transfers.
>
> Changes from V1:
> * Fixed coding style of the multi-line comments.
>
> Changes from V2:
> * Added setup of 'desc->tx_width' that is needed to calculate the
> residue.
>
> Signed-off-by: Torsten Fleischer <torfl6749 at gmail.com>
Acked-by: Nicolas Ferre <nicolas.ferre at atmel.com>
Thanks!
> ---
> drivers/dma/at_hdmac.c | 175 +++++++++++++++++++++++++++++++++++++++++++++----
> 1 file changed, 164 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c
> index 0b4fc6f..57b2141 100644
> --- a/drivers/dma/at_hdmac.c
> +++ b/drivers/dma/at_hdmac.c
> @@ -65,6 +65,21 @@ static void atc_issue_pending(struct dma_chan *chan);
>
> /*----------------------------------------------------------------------*/
>
> +static inline unsigned int atc_get_xfer_width(dma_addr_t src, dma_addr_t dst,
> + size_t len)
> +{
> + unsigned int width;
> +
> + if (!((src | dst | len) & 3))
> + width = 2;
> + else if (!((src | dst | len) & 1))
> + width = 1;
> + else
> + width = 0;
> +
> + return width;
> +}
> +
> static struct at_desc *atc_first_active(struct at_dma_chan *atchan)
> {
> return list_first_entry(&atchan->active_list,
> @@ -659,16 +674,10 @@ atc_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,
> * We can be a lot more clever here, but this should take care
> * of the most common optimization.
> */
> - if (!((src | dest | len) & 3)) {
> - ctrla = ATC_SRC_WIDTH_WORD | ATC_DST_WIDTH_WORD;
> - src_width = dst_width = 2;
> - } else if (!((src | dest | len) & 1)) {
> - ctrla = ATC_SRC_WIDTH_HALFWORD | ATC_DST_WIDTH_HALFWORD;
> - src_width = dst_width = 1;
> - } else {
> - ctrla = ATC_SRC_WIDTH_BYTE | ATC_DST_WIDTH_BYTE;
> - src_width = dst_width = 0;
> - }
> + src_width = dst_width = atc_get_xfer_width(src, dest, len);
> +
> + ctrla = ATC_SRC_WIDTH(src_width) |
> + ATC_DST_WIDTH(dst_width);
>
> for (offset = 0; offset < len; offset += xfer_count << src_width) {
> xfer_count = min_t(size_t, (len - offset) >> src_width,
> @@ -862,6 +871,144 @@ err:
> }
>
> /**
> + * atc_prep_dma_sg - prepare memory to memory scather-gather operation
> + * @chan: the channel to prepare operation on
> + * @dst_sg: destination scatterlist
> + * @dst_nents: number of destination scatterlist entries
> + * @src_sg: source scatterlist
> + * @src_nents: number of source scatterlist entries
> + * @flags: tx descriptor status flags
> + */
> +static struct dma_async_tx_descriptor *
> +atc_prep_dma_sg(struct dma_chan *chan,
> + struct scatterlist *dst_sg, unsigned int dst_nents,
> + struct scatterlist *src_sg, unsigned int src_nents,
> + unsigned long flags)
> +{
> + struct at_dma_chan *atchan = to_at_dma_chan(chan);
> + struct at_desc *desc = NULL;
> + struct at_desc *first = NULL;
> + struct at_desc *prev = NULL;
> + unsigned int src_width;
> + unsigned int dst_width;
> + size_t xfer_count;
> + u32 ctrla;
> + u32 ctrlb;
> + size_t dst_len = 0, src_len = 0;
> + dma_addr_t dst = 0, src = 0;
> + size_t len = 0, total_len = 0;
> +
> + if (unlikely(dst_nents == 0 || src_nents == 0))
> + return NULL;
> +
> + if (unlikely(dst_sg == NULL || src_sg == NULL))
> + return NULL;
> +
> + ctrlb = ATC_DEFAULT_CTRLB | ATC_IEN
> + | ATC_SRC_ADDR_MODE_INCR
> + | ATC_DST_ADDR_MODE_INCR
> + | ATC_FC_MEM2MEM;
> +
> + /*
> + * loop until there is either no more source or no more destination
> + * scatterlist entry
> + */
> + while (true) {
> +
> + /* prepare the next transfer */
> + if (dst_len == 0) {
> +
> + /* no more destination scatterlist entries */
> + if (!dst_sg || !dst_nents)
> + break;
> +
> + dst = sg_dma_address(dst_sg);
> + dst_len = sg_dma_len(dst_sg);
> +
> + dst_sg = sg_next(dst_sg);
> + dst_nents--;
> + }
> +
> + if (src_len == 0) {
> +
> + /* no more source scatterlist entries */
> + if (!src_sg || !src_nents)
> + break;
> +
> + src = sg_dma_address(src_sg);
> + src_len = sg_dma_len(src_sg);
> +
> + src_sg = sg_next(src_sg);
> + src_nents--;
> + }
> +
> + len = min_t(size_t, src_len, dst_len);
> + if (len == 0)
> + continue;
> +
> + /* take care for the alignment */
> + src_width = dst_width = atc_get_xfer_width(src, dst, len);
> +
> + ctrla = ATC_SRC_WIDTH(src_width) |
> + ATC_DST_WIDTH(dst_width);
> +
> + /*
> + * The number of transfers to set up refer to the source width
> + * that depends on the alignment.
> + */
> + xfer_count = len >> src_width;
> + if (xfer_count > ATC_BTSIZE_MAX) {
> + xfer_count = ATC_BTSIZE_MAX;
> + len = ATC_BTSIZE_MAX << src_width;
> + }
> +
> + /* create the transfer */
> + desc = atc_desc_get(atchan);
> + if (!desc)
> + goto err_desc_get;
> +
> + desc->lli.saddr = src;
> + desc->lli.daddr = dst;
> + desc->lli.ctrla = ctrla | xfer_count;
> + desc->lli.ctrlb = ctrlb;
> +
> + desc->txd.cookie = 0;
> + desc->len = len;
> +
> + /*
> + * Although we only need the transfer width for the first and
> + * the last descriptor, its easier to set it to all descriptors.
> + */
> + desc->tx_width = src_width;
> +
> + atc_desc_chain(&first, &prev, desc);
> +
> + /* update the lengths and addresses for the next loop cycle */
> + dst_len -= len;
> + src_len -= len;
> + dst += len;
> + src += len;
> +
> + total_len += len;
> + }
> +
> + /* First descriptor of the chain embedds additional information */
> + first->txd.cookie = -EBUSY;
> + first->total_len = total_len;
> +
> + /* set end-of-link to the last link descriptor of list*/
> + set_desc_eol(desc);
> +
> + first->txd.flags = flags; /* client is in control of this ack */
> +
> + return &first->txd;
> +
> +err_desc_get:
> + atc_desc_put(atchan, first);
> + return NULL;
> +}
> +
> +/**
> * atc_dma_cyclic_check_values
> * Check for too big/unaligned periods and unaligned DMA buffer
> */
> @@ -1461,8 +1608,10 @@ static int __init at_dma_probe(struct platform_device *pdev)
>
> /* setup platform data for each SoC */
> dma_cap_set(DMA_MEMCPY, at91sam9rl_config.cap_mask);
> + dma_cap_set(DMA_SG, at91sam9rl_config.cap_mask);
> dma_cap_set(DMA_MEMCPY, at91sam9g45_config.cap_mask);
> dma_cap_set(DMA_SLAVE, at91sam9g45_config.cap_mask);
> + dma_cap_set(DMA_SG, at91sam9g45_config.cap_mask);
>
> /* get DMA parameters from controller type */
> plat_dat = at_dma_get_driver_data(pdev);
> @@ -1582,11 +1731,15 @@ static int __init at_dma_probe(struct platform_device *pdev)
> atdma->dma_common.residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
> }
>
> + if (dma_has_cap(DMA_SG, atdma->dma_common.cap_mask))
> + atdma->dma_common.device_prep_dma_sg = atc_prep_dma_sg;
> +
> dma_writel(atdma, EN, AT_DMA_ENABLE);
>
> - dev_info(&pdev->dev, "Atmel AHB DMA Controller ( %s%s), %d channels\n",
> + dev_info(&pdev->dev, "Atmel AHB DMA Controller ( %s%s%s), %d channels\n",
> dma_has_cap(DMA_MEMCPY, atdma->dma_common.cap_mask) ? "cpy " : "",
> dma_has_cap(DMA_SLAVE, atdma->dma_common.cap_mask) ? "slave " : "",
> + dma_has_cap(DMA_SG, atdma->dma_common.cap_mask) ? "sg-cpy " : "",
> plat_dat->nr_channels);
>
> dma_async_device_register(&atdma->dma_common);
>
--
Nicolas Ferre
More information about the linux-arm-kernel
mailing list