[PATCH v5] ARM: mvebu: a385-db-ap: Enable the NAND
Maxime Ripard
maxime.ripard at free-electrons.com
Tue Mar 3 02:16:45 PST 2015
The Armada 385 Access Point Development Board has a 1GB NAND SLC chip from
Micron as its main storage. Enable it.
Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
---
Changes from v4:
- Rebased on top of 4.0-rc1
arch/arm/boot/dts/armada-385-db-ap.dts | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts
index 57b9119fb3e0..9e33f7d7276b 100644
--- a/arch/arm/boot/dts/armada-385-db-ap.dts
+++ b/arch/arm/boot/dts/armada-385-db-ap.dts
@@ -150,6 +150,19 @@
phy = <&phy0>;
phy-mode = "rgmii-id";
};
+
+ nfc: flash at d0000 {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ num-cs = <1>;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+ marvell,nand-keep-config;
+ marvell,nand-enable-arbiter;
+ nand-on-flash-bbt;
+ };
};
pcie-controller {
--
2.3.0
More information about the linux-arm-kernel
mailing list