[PATCH 2/5] ARM: orion: always use MULTI_IRQ_HANDLER
Arnd Bergmann
arnd at arndb.de
Mon Mar 2 12:36:55 PST 2015
As a preparation for multiplatform support, this enables
the MULTI_IRQ_HANDLER code unconditionally on dove and
orion5x, and introduces the respective code on mv78xx0,
which did not have it so far. The classic entry-macro.S
files are removed as they are now obsolete.
Signed-off-by: Arnd Bergmann <arnd at arndb.de>
---
arch/arm/Kconfig | 3 ++
arch/arm/mach-dove/include/mach/entry-macro.S | 33 -------------------
arch/arm/mach-dove/irq.c | 11 -------
arch/arm/mach-mv78xx0/include/mach/entry-macro.S | 41 ------------------------
arch/arm/mach-mv78xx0/irq.c | 33 +++++++++++++++++++
arch/arm/mach-orion5x/include/mach/entry-macro.S | 25 ---------------
arch/arm/mach-orion5x/irq.c | 12 -------
7 files changed, 36 insertions(+), 122 deletions(-)
delete mode 100644 arch/arm/mach-dove/include/mach/entry-macro.S
delete mode 100644 arch/arm/mach-mv78xx0/include/mach/entry-macro.S
delete mode 100644 arch/arm/mach-orion5x/include/mach/entry-macro.S
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 0f7dd89b5eee..39a625df6f75 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -501,6 +501,7 @@ config ARCH_DOVE
select CPU_PJ4
select GENERIC_CLOCKEVENTS
select MIGHT_HAVE_PCI
+ select MULTI_IRQ_HANDLER
select MVEBU_MBUS
select PINCTRL
select PINCTRL_DOVE
@@ -514,6 +515,7 @@ config ARCH_MV78XX0
select CPU_FEROCEON
select GENERIC_CLOCKEVENTS
select MVEBU_MBUS
+ select MULTI_IRQ_HANDLER
select PCI
select PLAT_ORION_LEGACY
help
@@ -527,6 +529,7 @@ config ARCH_ORION5X
select CPU_FEROCEON
select GENERIC_CLOCKEVENTS
select MVEBU_MBUS
+ select MULTI_IRQ_HANDLER
select PCI
select PLAT_ORION_LEGACY
help
diff --git a/arch/arm/mach-dove/include/mach/entry-macro.S b/arch/arm/mach-dove/include/mach/entry-macro.S
deleted file mode 100644
index 72d622baaad3..000000000000
--- a/arch/arm/mach-dove/include/mach/entry-macro.S
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * arch/arm/mach-dove/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for Marvell Dove platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <mach/bridge-regs.h>
-
- .macro get_irqnr_preamble, base, tmp
- ldr \base, =IRQ_VIRT_BASE
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- @ check low interrupts
- ldr \irqstat, [\base, #IRQ_CAUSE_LOW_OFF]
- ldr \tmp, [\base, #IRQ_MASK_LOW_OFF]
- mov \irqnr, #31
- ands \irqstat, \irqstat, \tmp
-
- @ if no low interrupts set, check high interrupts
- ldreq \irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
- ldreq \tmp, [\base, #IRQ_MASK_HIGH_OFF]
- moveq \irqnr, #63
- andeqs \irqstat, \irqstat, \tmp
-
- @ find first active interrupt source
- clzne \irqstat, \irqstat
- subne \irqnr, \irqnr, \irqstat
- .endm
diff --git a/arch/arm/mach-dove/irq.c b/arch/arm/mach-dove/irq.c
index 4a5a7aedcb76..1b1bc04346cf 100644
--- a/arch/arm/mach-dove/irq.c
+++ b/arch/arm/mach-dove/irq.c
@@ -108,14 +108,6 @@ static int __initdata gpio2_irqs[4] = {
0,
};
-#ifdef CONFIG_MULTI_IRQ_HANDLER
-/*
- * Compiling with both non-DT and DT support enabled, will
- * break asm irq handler used by non-DT boards. Therefore,
- * we provide a C-style irq handler even for non-DT boards,
- * if MULTI_IRQ_HANDLER is set.
- */
-
static void __iomem *dove_irq_base = IRQ_VIRT_BASE;
static asmlinkage void
@@ -138,7 +130,6 @@ __exception_irq_entry dove_legacy_handle_irq(struct pt_regs *regs)
return;
}
}
-#endif
void __init dove_init_irq(void)
{
@@ -147,9 +138,7 @@ void __init dove_init_irq(void)
orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF);
orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF);
-#ifdef CONFIG_MULTI_IRQ_HANDLER
set_handle_irq(dove_legacy_handle_irq);
-#endif
/*
* Initialize gpiolib for GPIOs 0-71.
diff --git a/arch/arm/mach-mv78xx0/include/mach/entry-macro.S b/arch/arm/mach-mv78xx0/include/mach/entry-macro.S
deleted file mode 100644
index 6b1f088e0597..000000000000
--- a/arch/arm/mach-mv78xx0/include/mach/entry-macro.S
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * arch/arm/mach-mv78xx0/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for Marvell MV78xx0 platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <mach/bridge-regs.h>
-
- .macro get_irqnr_preamble, base, tmp
- ldr \base, =IRQ_VIRT_BASE
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- @ check low interrupts
- ldr \irqstat, [\base, #IRQ_CAUSE_LOW_OFF]
- ldr \tmp, [\base, #IRQ_MASK_LOW_OFF]
- mov \irqnr, #31
- ands \irqstat, \irqstat, \tmp
- bne 1001f
-
- @ if no low interrupts set, check high interrupts
- ldr \irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
- ldr \tmp, [\base, #IRQ_MASK_HIGH_OFF]
- mov \irqnr, #63
- ands \irqstat, \irqstat, \tmp
- bne 1001f
-
- @ if no high interrupts set, check error interrupts
- ldr \irqstat, [\base, #IRQ_CAUSE_ERR_OFF]
- ldr \tmp, [\base, #IRQ_MASK_ERR_OFF]
- mov \irqnr, #95
- ands \irqstat, \irqstat, \tmp
-
- @ find first active interrupt source
-1001: clzne \irqstat, \irqstat
- subne \irqnr, \irqnr, \irqstat
- .endm
diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c
index 32073444024b..2453c33faccf 100644
--- a/arch/arm/mach-mv78xx0/irq.c
+++ b/arch/arm/mach-mv78xx0/irq.c
@@ -11,6 +11,7 @@
#include <linux/kernel.h>
#include <linux/irq.h>
#include <linux/io.h>
+#include <asm/exception.h>
#include <mach/bridge-regs.h>
#include <plat/orion-gpio.h>
#include <plat/irq.h>
@@ -23,12 +24,44 @@ static int __initdata gpio0_irqs[4] = {
IRQ_MV78XX0_GPIO_24_31,
};
+static void __iomem *mv78xx0_irq_base = IRQ_VIRT_BASE;
+
+static asmlinkage void
+__exception_irq_entry mv78xx0_legacy_handle_irq(struct pt_regs *regs)
+{
+ u32 stat;
+
+ stat = readl_relaxed(mv78xx0_irq_base + IRQ_CAUSE_LOW_OFF);
+ stat &= readl_relaxed(mv78xx0_irq_base + IRQ_MASK_LOW_OFF);
+ if (stat) {
+ unsigned int hwirq = __fls(stat);
+ handle_IRQ(hwirq, regs);
+ return;
+ }
+ stat = readl_relaxed(mv78xx0_irq_base + IRQ_CAUSE_HIGH_OFF);
+ stat &= readl_relaxed(mv78xx0_irq_base + IRQ_MASK_HIGH_OFF);
+ if (stat) {
+ unsigned int hwirq = 32 + __fls(stat);
+ handle_IRQ(hwirq, regs);
+ return;
+ }
+ stat = readl_relaxed(mv78xx0_irq_base + IRQ_CAUSE_ERR_OFF);
+ stat &= readl_relaxed(mv78xx0_irq_base + IRQ_MASK_ERR_OFF);
+ if (stat) {
+ unsigned int hwirq = 64 + __fls(stat);
+ handle_IRQ(hwirq, regs);
+ return;
+ }
+}
+
void __init mv78xx0_init_irq(void)
{
orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF);
orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF);
orion_irq_init(64, IRQ_VIRT_BASE + IRQ_MASK_ERR_OFF);
+ set_handle_irq(mv78xx0_legacy_handle_irq);
+
/*
* Initialize gpiolib for GPIOs 0-31. (The GPIO interrupt mask
* registers for core #1 are at an offset of 0x18 from those of
diff --git a/arch/arm/mach-orion5x/include/mach/entry-macro.S b/arch/arm/mach-orion5x/include/mach/entry-macro.S
deleted file mode 100644
index 79eb502a1e64..000000000000
--- a/arch/arm/mach-orion5x/include/mach/entry-macro.S
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * arch/arm/mach-orion5x/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for Orion platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <mach/bridge-regs.h>
-
- .macro get_irqnr_preamble, base, tmp
- ldr \base, =MAIN_IRQ_CAUSE
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \irqstat, [\base, #0] @ main cause
- ldr \tmp, [\base, #(MAIN_IRQ_MASK - MAIN_IRQ_CAUSE)] @ main mask
- mov \irqnr, #0 @ default irqnr
- @ find cause bits that are unmasked
- ands \irqstat, \irqstat, \tmp @ clear Z flag if any
- clzne \irqnr, \irqstat @ calc irqnr
- rsbne \irqnr, \irqnr, #31
- .endm
diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c
index cd4bac4d7e43..a3f615801d27 100644
--- a/arch/arm/mach-orion5x/irq.c
+++ b/arch/arm/mach-orion5x/irq.c
@@ -26,14 +26,6 @@ static int __initdata gpio0_irqs[4] = {
IRQ_ORION5X_GPIO_24_31,
};
-#ifdef CONFIG_MULTI_IRQ_HANDLER
-/*
- * Compiling with both non-DT and DT support enabled, will
- * break asm irq handler used by non-DT boards. Therefore,
- * we provide a C-style irq handler even for non-DT boards,
- * if MULTI_IRQ_HANDLER is set.
- */
-
asmlinkage void
__exception_irq_entry orion5x_legacy_handle_irq(struct pt_regs *regs)
{
@@ -47,15 +39,11 @@ __exception_irq_entry orion5x_legacy_handle_irq(struct pt_regs *regs)
return;
}
}
-#endif
void __init orion5x_init_irq(void)
{
orion_irq_init(0, MAIN_IRQ_MASK);
-
-#ifdef CONFIG_MULTI_IRQ_HANDLER
set_handle_irq(orion5x_legacy_handle_irq);
-#endif
/*
* Initialize gpiolib for GPIOs 0-31.
--
2.1.0.rc2
More information about the linux-arm-kernel
mailing list