[PATCH v1 2/4] ARM: dts: vf500-colibri: Add device tree node for touchscreen support
Sanchayan Maity
maitysanchayan at gmail.com
Mon Jun 29 23:54:46 PDT 2015
Add device tree node for touchscreen support on Colibri VF50. The
touchscreen functionality on VF50 uses the ADC channels of Vybrid
and some GPIOs. Also add pinctrl nodes for proper pinmux.
Signed-off-by: Sanchayan Maity <maitysanchayan at gmail.com>
---
arch/arm/boot/dts/vf500-colibri-eval-v3.dts | 4 +++
arch/arm/boot/dts/vf500-colibri.dtsi | 46 +++++++++++++++++++++++++++++
2 files changed, 50 insertions(+)
diff --git a/arch/arm/boot/dts/vf500-colibri-eval-v3.dts b/arch/arm/boot/dts/vf500-colibri-eval-v3.dts
index 7fc782c..c5efb57 100644
--- a/arch/arm/boot/dts/vf500-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/vf500-colibri-eval-v3.dts
@@ -15,3 +15,7 @@
model = "Toradex Colibri VF50 on Colibri Evaluation Board";
compatible = "toradex,vf500-colibri_vf50-on-eval", "toradex,vf500-colibri_vf50", "fsl,vf500";
};
+
+&touchctrl {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/vf500-colibri.dtsi b/arch/arm/boot/dts/vf500-colibri.dtsi
index cee34a3..4807a32 100644
--- a/arch/arm/boot/dts/vf500-colibri.dtsi
+++ b/arch/arm/boot/dts/vf500-colibri.dtsi
@@ -17,4 +17,50 @@
memory {
reg = <0x80000000 0x8000000>;
};
+
+ touchctrl: vf50_touchctrl {
+ compatible = "toradex,vf50-touchctrl";
+ io-channels = <&adc1 0>,<&adc0 0>,
+ <&adc0 1>,<&adc1 2>;
+ xp-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ xm-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+ yp-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ ym-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+ pen-detect-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+ pen-pullup-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "idle","default","gpios";
+ pinctrl-0 = <&pinctrl_touchctrl_idle>;
+ pinctrl-1 = <&pinctrl_touchctrl_default>;
+ pinctrl-2 = <&pinctrl_touchctrl_gpios>;
+ status = "disabled";
+ };
+};
+
+&iomuxc {
+ vf610-colibri {
+ pinctrl_touchctrl_idle: touchctrl_idle {
+ fsl,pins = <
+ VF610_PAD_PTA18__GPIO_8 0x206d
+ VF610_PAD_PTA19__GPIO_9 0x206d
+ >;
+ };
+
+ pinctrl_touchctrl_default: touchctrl_default {
+ fsl,pins = <
+ VF610_PAD_PTA18__ADC0_SE0 0x2060
+ VF610_PAD_PTA19__ADC0_SE1 0x2060
+ VF610_PAD_PTA16__ADC1_SE0 0x2060
+ VF610_PAD_PTB2__ADC1_SE2 0x2060
+ >;
+ };
+
+ pinctrl_touchctrl_gpios: touchctrl_gpios {
+ fsl,pins = <
+ VF610_PAD_PTA23__GPIO_13 0x22ed
+ VF610_PAD_PTB23__GPIO_93 0x22ed
+ VF610_PAD_PTA22__GPIO_12 0x22ed
+ VF610_PAD_PTA11__GPIO_4 0x22ed
+ >;
+ };
+ };
};
--
2.4.5
More information about the linux-arm-kernel
mailing list