[PATCH 3/3] ARM: mvebu: update mvebu_v7_defconfig with features needed for Armada 388 GP

[Gregory CLEMENT]

Hi Thomas,

On 18/06/2015 14:38, Thomas Petazzoni wrote:
> The Armada 388 GP board has the following hardware features that were
> not enabled in mvebu_v7_defconfig:
> 
>  * An AT24 I2C EEPROM (also used by armada-xp-lenovo-ix4-300d)
>  * A PCA9555 I2C GPIO expander
>  * Several fixed regulators
> 
> Therefore, this commit adds the necessary options to mvebu_v7_defconfig.
> 
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni at free-electrons.com>


Acked-by: Gregory CLEMENT <gregory.clement at free-electrons.com>

Thanks,

Gregory

> ---
>  arch/arm/configs/mvebu_v7_defconfig | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/arch/arm/configs/mvebu_v7_defconfig b/arch/arm/configs/mvebu_v7_defconfig
> index cacc9f4..13fcd02 100644
> --- a/arch/arm/configs/mvebu_v7_defconfig
> +++ b/arch/arm/configs/mvebu_v7_defconfig
> @@ -58,6 +58,7 @@ CONFIG_MTD_M25P80=y
>  CONFIG_MTD_NAND=y
>  CONFIG_MTD_NAND_PXA3xx=y
>  CONFIG_MTD_SPI_NOR=y
> +CONFIG_EEPROM_AT24=y
>  CONFIG_BLK_DEV_SD=y
>  CONFIG_ATA=y
>  CONFIG_AHCI_MVEBU=y
> @@ -83,11 +84,14 @@ CONFIG_I2C_MV64XXX=y
>  CONFIG_SPI=y
>  CONFIG_SPI_ORION=y
>  CONFIG_GPIO_SYSFS=y
> +CONFIG_GPIO_PCA953X=y
>  CONFIG_SENSORS_GPIO_FAN=y
>  CONFIG_THERMAL=y
>  CONFIG_ARMADA_THERMAL=y
>  CONFIG_WATCHDOG=y
>  CONFIG_ORION_WATCHDOG=y
> +CONFIG_REGULATOR=y
> +CONFIG_REGULATOR_FIXED_VOLTAGE=y
>  CONFIG_SOUND=y
>  CONFIG_SND=y
>  CONFIG_SND_SOC=y
> 


-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com