[PATCH v2 4/5] drm/rockchip: vop: switch cursor plane to window 3
Mark Yao
mark.yao at rock-chips.com
Fri Jun 26 03:07:28 PDT 2015
Window 1 support scale and yuv format, it's waste use it for a
cursor, use window 3 is enough.
Signed-off-by: Mark Yao <mark.yao at rock-chips.com>
---
Changes in v2: None
drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
index f6ef634..40107bb 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
@@ -342,13 +342,14 @@ static const struct vop_reg_data vop_init_reg_table[] = {
/*
* Note: rk3288 has a dedicated 'cursor' window, however, that window requires
* special support to get alpha blending working. For now, just use overlay
- * window 1 for the drm cursor.
+ * window 3 for the drm cursor.
+ *
*/
static const struct vop_win_data rk3288_vop_win_data[] = {
{ .base = 0x00, .phy = &win01_data, .type = DRM_PLANE_TYPE_PRIMARY },
- { .base = 0x40, .phy = &win01_data, .type = DRM_PLANE_TYPE_CURSOR },
+ { .base = 0x40, .phy = &win01_data, .type = DRM_PLANE_TYPE_OVERLAY },
{ .base = 0x00, .phy = &win23_data, .type = DRM_PLANE_TYPE_OVERLAY },
- { .base = 0x50, .phy = &win23_data, .type = DRM_PLANE_TYPE_OVERLAY },
+ { .base = 0x50, .phy = &win23_data, .type = DRM_PLANE_TYPE_CURSOR },
{ .base = 0x00, .phy = &cursor_data, .type = DRM_PLANE_TYPE_OVERLAY },
};
--
1.7.9.5
More information about the linux-arm-kernel
mailing list