[PATCH 2/6] GICv3: Add ITS entry to THUNDER dts
Chalamarla, Tirumalesh
Tirumalesh.Chalamarla at caviumnetworks.com
Thu Jun 25 16:19:59 PDT 2015
Hi Marc,
Any feed back on this.
Do you want me to submit this as a separate patch?so that it is easy for getting acceptance.
Thanks,
Tirumalesh.
> On Sep 24, 2014, at 8:37 AM, Robert Richter <rric at kernel.org> wrote:
>
> From: Tirumalesh Chalamarla <tchalamarla at cavium.com>
>
> The PCIe host controller uses MSIs provided by GICv3 ITS. Enable it on
> Thunder SoCs by adding an entry to DT.
>
> Signed-off-by: Tirumalesh Chalamarla <tchalamarla at cavium.com>
> Signed-off-by: Robert Richter <rrichter at cavium.com>
> ---
> arch/arm64/boot/dts/thunder-88xx.dtsi | 9 +++++++++
> 1 file changed, 9 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/thunder-88xx.dtsi b/arch/arm64/boot/dts/thunder-88xx.dtsi
> index d8c0bdc51882..9cb7cf94284a 100644
> --- a/arch/arm64/boot/dts/thunder-88xx.dtsi
> +++ b/arch/arm64/boot/dts/thunder-88xx.dtsi
> @@ -376,10 +376,19 @@
> gic0: interrupt-controller at 8010,00000000 {
> compatible = "arm,gic-v3";
> #interrupt-cells = <3>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> interrupt-controller;
> reg = <0x8010 0x00000000 0x0 0x010000>, /* GICD */
> <0x8010 0x80000000 0x0 0x600000>; /* GICR */
> interrupts = <1 9 0xf04>;
> +
> + its: gic-its at 8010,00020000 {
> + compatible = "arm,gic-v3-its";
> + msi-controller;
> + reg = <0x8010 0x20000 0x0 0x200000>;
> + };
> };
>
> uaa0: serial at 87e0,24000000 {
> --
> 2.1.0
>
More information about the linux-arm-kernel
mailing list