[PATCH] keystone: psci: adds cpu_die implementation
Vitaly Andrianov
vitalya at ti.com
Thu Jun 25 09:01:36 PDT 2015
On 06/25/2015 10:59 AM, santosh shilimkar wrote:
> On 6/25/2015 7:45 AM, Mark Rutland wrote:
>> Hi,
>>
>> On Thu, Jun 25, 2015 at 03:02:50PM +0100, Vitaly Andrianov wrote:
>>> This commit add cpu_die implementation using psci api
>>
>> I don't understand. If you have a PSCI implementation, it should be
>> sufficient to have a PSCI node (and enable-method) in your DT, and the
>> generic code will be used. Nothing should be required in your board
>> code.
>>
>> You should also use CPU_ON to bring secondaries online rather than
>> mixing up PSCI and platform-specific mechanisms.
>>
> Good point about CPU_ON. We need that as well.
>
Does it mean that keystone_defconfig must always have CONFIG_HOTPLUG_CPU
and CONFIG_ARM_PSCI enabled?
What is if someone doesn't want to have HOTPLUG_CPU?
How he can boot secondary CPU w/o platform-specific mechanizm?
>>>
>>> Signed-off-by: Vitaly Andrianov <vitalya at ti.com>
>>> ---
>>> arch/arm/mach-keystone/platsmp.c | 32 ++++++++++++++++++++++++++++++++
>>> 1 file changed, 32 insertions(+)
>>>
>>> diff --git a/arch/arm/mach-keystone/platsmp.c
>>> b/arch/arm/mach-keystone/platsmp.c
>>> index 5f46a7c..2c40cc0 100644
>>> --- a/arch/arm/mach-keystone/platsmp.c
>>> +++ b/arch/arm/mach-keystone/platsmp.c
>>> @@ -20,6 +20,7 @@
>>> #include <asm/prom.h>
>>> #include <asm/tlbflush.h>
>>> #include <asm/pgtable.h>
>>> +#include <asm/psci.h>
>>>
>>> #include "keystone.h"
>>>
>>> @@ -51,7 +52,38 @@ static inline void __cpuinit
>>> keystone_smp_secondary_initmem(unsigned int cpu)
>>> {}
>>> #endif
>>>
>>> +
>>> +#ifdef CONFIG_HOTPLUG_CPU
>>> +static void keystone_cpu_die(unsigned int cpu)
>>> +{
>>> +#ifdef CONFIG_ARM_PSCI
>>> + struct psci_power_state pwr_state = {0, 0, 0};
>>> +
>>> + pr_info("keystone_cpu_die(%d) from %d using PSCI\n", cpu,
>>> + smp_processor_id());
>>> +
>>> + if (psci_ops.cpu_off)
>>> + psci_ops.cpu_off(pwr_state);
>>> +#else
>>> + /*
>>> + * We may want to add here a direct smc call to monitor
>>> + * if the kernel doesn't support PSCI API
>>> + */
>>> +#endif
>>
>> You should determine this from your DT. Your FW/bootloader can patch in
>> the relevant nodes and properties when support is present, so the
>> presence of such nodes should guarantee that PSCI is available.
>>
> That will be a nice trick. FW already does some tweaks of dts for
> LPAE/non_LPAE tweaks.
>
> Regards,
> Santosh
Thanks,
-Vitaly
More information about the linux-arm-kernel
mailing list