[PATCH v6 08/12] KVM: arm64: re-factor hyp.S debug register code

Alex Bennée alex.bennee at linaro.org
Wed Jun 24 23:34:56 PDT 2015


Christoffer Dall <christoffer.dall at linaro.org> writes:

> On Fri, Jun 19, 2015 at 01:23:46PM +0100, Alex Bennée wrote:
>> This is a pre-cursor to sharing the code with the guest debug support.
>> This replaces the big macro that fishes data out of a fixed location
>> with a more general helper macro to restore a set of debug registers. It
>> uses macro substitution so it can be re-used for debug control and value
>> registers. It does however rely on the debug registers being 64 bit
>> aligned (as they happen to be in the hyp ABI).
>> 
>> Signed-off-by: Alex Bennée <alex.bennee at linaro.org>
>> 
>> ---
>> v3:
>>   - return to the patch series
>>   - add save and restore targets
>>   - change register use and document
>> v4:
>>   - keep original setup/restore names
>>   - don't use split u32/u64 structure yet
>> v6:
>>   - fix ws and clobber info in hyp.S
>> ---
>>  arch/arm64/kvm/hyp.S | 517 ++++++++++++++-------------------------------------
>>  1 file changed, 138 insertions(+), 379 deletions(-)
>> 
>> diff --git a/arch/arm64/kvm/hyp.S b/arch/arm64/kvm/hyp.S
>> index 74e63d8..ee7f649 100644
>> --- a/arch/arm64/kvm/hyp.S
>> +++ b/arch/arm64/kvm/hyp.S
>> @@ -228,199 +228,52 @@
>>  	stp	x24, x25, [x3, #160]
>>  .endm
>>  
>> -.macro save_debug
>> -	// x2: base address for cpu context
>> -	// x3: tmp register
>> -
>> -	mrs	x26, id_aa64dfr0_el1
>> -	ubfx	x24, x26, #12, #4	// Extract BRPs
>> -	ubfx	x25, x26, #20, #4	// Extract WRPs
>> -	mov	w26, #15
>> -	sub	w24, w26, w24		// How many BPs to skip
>> -	sub	w25, w26, w25		// How many WPs to skip
>> -
>> -	add	x3, x2, #CPU_SYSREG_OFFSET(DBGBCR0_EL1)
>> -
>> -	adr	x26, 1f
>> -	add	x26, x26, x24, lsl #2
>> -	br	x26
>> -1:
>> -	mrs	x20, dbgbcr15_el1
>> -	mrs	x19, dbgbcr14_el1
>> -	mrs	x18, dbgbcr13_el1
>> -	mrs	x17, dbgbcr12_el1
>> -	mrs	x16, dbgbcr11_el1
>> -	mrs	x15, dbgbcr10_el1
>> -	mrs	x14, dbgbcr9_el1
>> -	mrs	x13, dbgbcr8_el1
>> -	mrs	x12, dbgbcr7_el1
>> -	mrs	x11, dbgbcr6_el1
>> -	mrs	x10, dbgbcr5_el1
>> -	mrs	x9, dbgbcr4_el1
>> -	mrs	x8, dbgbcr3_el1
>> -	mrs	x7, dbgbcr2_el1
>> -	mrs	x6, dbgbcr1_el1
>> -	mrs	x5, dbgbcr0_el1
>> -
>> -	adr	x26, 1f
>> -	add	x26, x26, x24, lsl #2
>> -	br	x26
>> -
>> -1:
>> -	str	x20, [x3, #(15 * 8)]
>> -	str	x19, [x3, #(14 * 8)]
>> -	str	x18, [x3, #(13 * 8)]
>> -	str	x17, [x3, #(12 * 8)]
>> -	str	x16, [x3, #(11 * 8)]
>> -	str	x15, [x3, #(10 * 8)]
>> -	str	x14, [x3, #(9 * 8)]
>> -	str	x13, [x3, #(8 * 8)]
>> -	str	x12, [x3, #(7 * 8)]
>> -	str	x11, [x3, #(6 * 8)]
>> -	str	x10, [x3, #(5 * 8)]
>> -	str	x9, [x3, #(4 * 8)]
>> -	str	x8, [x3, #(3 * 8)]
>> -	str	x7, [x3, #(2 * 8)]
>> -	str	x6, [x3, #(1 * 8)]
>> -	str	x5, [x3, #(0 * 8)]
>> -
>> -	add	x3, x2, #CPU_SYSREG_OFFSET(DBGBVR0_EL1)
>> -
>> -	adr	x26, 1f
>> -	add	x26, x26, x24, lsl #2
>> -	br	x26
>> -1:
>> -	mrs	x20, dbgbvr15_el1
>> -	mrs	x19, dbgbvr14_el1
>> -	mrs	x18, dbgbvr13_el1
>> -	mrs	x17, dbgbvr12_el1
>> -	mrs	x16, dbgbvr11_el1
>> -	mrs	x15, dbgbvr10_el1
>> -	mrs	x14, dbgbvr9_el1
>> -	mrs	x13, dbgbvr8_el1
>> -	mrs	x12, dbgbvr7_el1
>> -	mrs	x11, dbgbvr6_el1
>> -	mrs	x10, dbgbvr5_el1
>> -	mrs	x9, dbgbvr4_el1
>> -	mrs	x8, dbgbvr3_el1
>> -	mrs	x7, dbgbvr2_el1
>> -	mrs	x6, dbgbvr1_el1
>> -	mrs	x5, dbgbvr0_el1
>> -
>> -	adr	x26, 1f
>> -	add	x26, x26, x24, lsl #2
>> -	br	x26
>> -
>> -1:
>> -	str	x20, [x3, #(15 * 8)]
>> -	str	x19, [x3, #(14 * 8)]
>> -	str	x18, [x3, #(13 * 8)]
>> -	str	x17, [x3, #(12 * 8)]
>> -	str	x16, [x3, #(11 * 8)]
>> -	str	x15, [x3, #(10 * 8)]
>> -	str	x14, [x3, #(9 * 8)]
>> -	str	x13, [x3, #(8 * 8)]
>> -	str	x12, [x3, #(7 * 8)]
>> -	str	x11, [x3, #(6 * 8)]
>> -	str	x10, [x3, #(5 * 8)]
>> -	str	x9, [x3, #(4 * 8)]
>> -	str	x8, [x3, #(3 * 8)]
>> -	str	x7, [x3, #(2 * 8)]
>> -	str	x6, [x3, #(1 * 8)]
>> -	str	x5, [x3, #(0 * 8)]
>> -
>> -	add	x3, x2, #CPU_SYSREG_OFFSET(DBGWCR0_EL1)
>> -
>> -	adr	x26, 1f
>> -	add	x26, x26, x25, lsl #2
>> -	br	x26
>> +.macro save_debug type
>> +	// x4: pointer to register set
>> +	// x5: number of registers to skip
>> +	// x6..x22 trashed
>> +
>> +	adr	x22, 1f
>> +	add	x22, x22, x5, lsl #2
>> +	br	x22
>>  1:
>> -	mrs	x20, dbgwcr15_el1
>> -	mrs	x19, dbgwcr14_el1
>> -	mrs	x18, dbgwcr13_el1
>> -	mrs	x17, dbgwcr12_el1
>> -	mrs	x16, dbgwcr11_el1
>> -	mrs	x15, dbgwcr10_el1
>> -	mrs	x14, dbgwcr9_el1
>> -	mrs	x13, dbgwcr8_el1
>> -	mrs	x12, dbgwcr7_el1
>> -	mrs	x11, dbgwcr6_el1
>> -	mrs	x10, dbgwcr5_el1
>> -	mrs	x9, dbgwcr4_el1
>> -	mrs	x8, dbgwcr3_el1
>> -	mrs	x7, dbgwcr2_el1
>> -	mrs	x6, dbgwcr1_el1
>> -	mrs	x5, dbgwcr0_el1
>> -
>> -	adr	x26, 1f
>> -	add	x26, x26, x25, lsl #2
>> -	br	x26
>> -
>> -1:
>> -	str	x20, [x3, #(15 * 8)]
>> -	str	x19, [x3, #(14 * 8)]
>> -	str	x18, [x3, #(13 * 8)]
>> -	str	x17, [x3, #(12 * 8)]
>> -	str	x16, [x3, #(11 * 8)]
>> -	str	x15, [x3, #(10 * 8)]
>> -	str	x14, [x3, #(9 * 8)]
>> -	str	x13, [x3, #(8 * 8)]
>> -	str	x12, [x3, #(7 * 8)]
>> -	str	x11, [x3, #(6 * 8)]
>> -	str	x10, [x3, #(5 * 8)]
>> -	str	x9, [x3, #(4 * 8)]
>> -	str	x8, [x3, #(3 * 8)]
>> -	str	x7, [x3, #(2 * 8)]
>> -	str	x6, [x3, #(1 * 8)]
>> -	str	x5, [x3, #(0 * 8)]
>> -
>> -	add	x3, x2, #CPU_SYSREG_OFFSET(DBGWVR0_EL1)
>> -
>> -	adr	x26, 1f
>> -	add	x26, x26, x25, lsl #2
>> -	br	x26
>> +	mrs	x21, \type\()15_el1
>> +	mrs	x20, \type\()14_el1
>> +	mrs	x19, \type\()13_el1
>> +	mrs	x18, \type\()12_el1
>> +	mrs	x17, \type\()11_el1
>> +	mrs	x16, \type\()10_el1
>> +	mrs	x15, \type\()9_el1
>> +	mrs	x14, \type\()8_el1
>> +	mrs	x13, \type\()7_el1
>> +	mrs	x12, \type\()6_el1
>> +	mrs	x11, \type\()5_el1
>> +	mrs	x10, \type\()4_el1
>> +	mrs	x9, \type\()3_el1
>> +	mrs	x8, \type\()2_el1
>> +	mrs	x7, \type\()1_el1
>> +	mrs	x6, \type\()0_el1
>> +
>> +	adr	x22, 1f
>> +	add	x22, x22, x5, lsl #2
>> +	br	x22
>>  1:
>> -	mrs	x20, dbgwvr15_el1
>> -	mrs	x19, dbgwvr14_el1
>> -	mrs	x18, dbgwvr13_el1
>> -	mrs	x17, dbgwvr12_el1
>> -	mrs	x16, dbgwvr11_el1
>> -	mrs	x15, dbgwvr10_el1
>> -	mrs	x14, dbgwvr9_el1
>> -	mrs	x13, dbgwvr8_el1
>> -	mrs	x12, dbgwvr7_el1
>> -	mrs	x11, dbgwvr6_el1
>> -	mrs	x10, dbgwvr5_el1
>> -	mrs	x9, dbgwvr4_el1
>> -	mrs	x8, dbgwvr3_el1
>> -	mrs	x7, dbgwvr2_el1
>> -	mrs	x6, dbgwvr1_el1
>> -	mrs	x5, dbgwvr0_el1
>> -
>> -	adr	x26, 1f
>> -	add	x26, x26, x25, lsl #2
>> -	br	x26
>> -
>> -1:
>> -	str	x20, [x3, #(15 * 8)]
>> -	str	x19, [x3, #(14 * 8)]
>> -	str	x18, [x3, #(13 * 8)]
>> -	str	x17, [x3, #(12 * 8)]
>> -	str	x16, [x3, #(11 * 8)]
>> -	str	x15, [x3, #(10 * 8)]
>> -	str	x14, [x3, #(9 * 8)]
>> -	str	x13, [x3, #(8 * 8)]
>> -	str	x12, [x3, #(7 * 8)]
>> -	str	x11, [x3, #(6 * 8)]
>> -	str	x10, [x3, #(5 * 8)]
>> -	str	x9, [x3, #(4 * 8)]
>> -	str	x8, [x3, #(3 * 8)]
>> -	str	x7, [x3, #(2 * 8)]
>> -	str	x6, [x3, #(1 * 8)]
>> -	str	x5, [x3, #(0 * 8)]
>> -
>> -	mrs	x21, mdccint_el1
>> -	str	x21, [x2, #CPU_SYSREG_OFFSET(MDCCINT_EL1)]
>> +	str	x21, [x4, #(15 * 8)]
>> +	str	x20, [x4, #(14 * 8)]
>> +	str	x19, [x4, #(13 * 8)]
>> +	str	x18, [x4, #(12 * 8)]
>> +	str	x17, [x4, #(11 * 8)]
>> +	str	x16, [x4, #(10 * 8)]
>> +	str	x15, [x4, #(9 * 8)]
>> +	str	x14, [x4, #(8 * 8)]
>> +	str	x13, [x4, #(7 * 8)]
>> +	str	x12, [x4, #(6 * 8)]
>> +	str	x11, [x4, #(5 * 8)]
>> +	str	x10, [x4, #(4 * 8)]
>> +	str	x9, [x4, #(3 * 8)]
>> +	str	x8, [x4, #(2 * 8)]
>> +	str	x7, [x4, #(1 * 8)]
>> +	str	x6, [x4, #(0 * 8)]
>>  .endm
>>  
>>  .macro restore_sysregs
>> @@ -465,195 +318,52 @@
>>  	msr	mdscr_el1,	x25
>>  .endm
>>  
>> -.macro restore_debug
>> -	// x2: base address for cpu context
>> -	// x3: tmp register
>> -
>> -	mrs	x26, id_aa64dfr0_el1
>> -	ubfx	x24, x26, #12, #4	// Extract BRPs
>> -	ubfx	x25, x26, #20, #4	// Extract WRPs
>> -	mov	w26, #15
>> -	sub	w24, w26, w24		// How many BPs to skip
>> -	sub	w25, w26, w25		// How many WPs to skip
>> -
>> -	add	x3, x2, #CPU_SYSREG_OFFSET(DBGBCR0_EL1)
>> +.macro restore_debug type
>> +        // x4: pointer to register set
>> +        // x5: number of registers to skip
>
> there's a white space issue here, should be tabs instead of spaces.  We
> can probably fix while applying, if there's no need to respin.

Damn thought I'd caught them all. Time to enable ws-butler-mode on my
assembler files as well.

As I'm re-spinning I'll fix them up.

>
>> +	// x6..x22 trashed
>>  
>> -	adr	x26, 1f
>> -	add	x26, x26, x24, lsl #2
>> -	br	x26
>> +	adr	x22, 1f
>> +	add	x22, x22, x5, lsl #2
>> +	br	x22
>>  1:
>> -	ldr	x20, [x3, #(15 * 8)]
>> -	ldr	x19, [x3, #(14 * 8)]
>> -	ldr	x18, [x3, #(13 * 8)]
>> -	ldr	x17, [x3, #(12 * 8)]
>> -	ldr	x16, [x3, #(11 * 8)]
>> -	ldr	x15, [x3, #(10 * 8)]
>> -	ldr	x14, [x3, #(9 * 8)]
>> -	ldr	x13, [x3, #(8 * 8)]
>> -	ldr	x12, [x3, #(7 * 8)]
>> -	ldr	x11, [x3, #(6 * 8)]
>> -	ldr	x10, [x3, #(5 * 8)]
>> -	ldr	x9, [x3, #(4 * 8)]
>> -	ldr	x8, [x3, #(3 * 8)]
>> -	ldr	x7, [x3, #(2 * 8)]
>> -	ldr	x6, [x3, #(1 * 8)]
>> -	ldr	x5, [x3, #(0 * 8)]
>> -
>> -	adr	x26, 1f
>> -	add	x26, x26, x24, lsl #2
>> -	br	x26
>> +	ldr	x21, [x4, #(15 * 8)]
>> +	ldr	x20, [x4, #(14 * 8)]
>> +	ldr	x19, [x4, #(13 * 8)]
>> +	ldr	x18, [x4, #(12 * 8)]
>> +	ldr	x17, [x4, #(11 * 8)]
>> +	ldr	x16, [x4, #(10 * 8)]
>> +	ldr	x15, [x4, #(9 * 8)]
>> +	ldr	x14, [x4, #(8 * 8)]
>> +	ldr	x13, [x4, #(7 * 8)]
>> +	ldr	x12, [x4, #(6 * 8)]
>> +	ldr	x11, [x4, #(5 * 8)]
>> +	ldr	x10, [x4, #(4 * 8)]
>> +	ldr	x9, [x4, #(3 * 8)]
>> +	ldr	x8, [x4, #(2 * 8)]
>> +	ldr	x7, [x4, #(1 * 8)]
>> +	ldr	x6, [x4, #(0 * 8)]
>> +
>> +	adr	x22, 1f
>> +	add	x22, x22, x5, lsl #2
>> +	br	x22
>>  1:
>> -	msr	dbgbcr15_el1, x20
>> -	msr	dbgbcr14_el1, x19
>> -	msr	dbgbcr13_el1, x18
>> -	msr	dbgbcr12_el1, x17
>> -	msr	dbgbcr11_el1, x16
>> -	msr	dbgbcr10_el1, x15
>> -	msr	dbgbcr9_el1, x14
>> -	msr	dbgbcr8_el1, x13
>> -	msr	dbgbcr7_el1, x12
>> -	msr	dbgbcr6_el1, x11
>> -	msr	dbgbcr5_el1, x10
>> -	msr	dbgbcr4_el1, x9
>> -	msr	dbgbcr3_el1, x8
>> -	msr	dbgbcr2_el1, x7
>> -	msr	dbgbcr1_el1, x6
>> -	msr	dbgbcr0_el1, x5
>> -
>> -	add	x3, x2, #CPU_SYSREG_OFFSET(DBGBVR0_EL1)
>> -
>> -	adr	x26, 1f
>> -	add	x26, x26, x24, lsl #2
>> -	br	x26
>> -1:
>> -	ldr	x20, [x3, #(15 * 8)]
>> -	ldr	x19, [x3, #(14 * 8)]
>> -	ldr	x18, [x3, #(13 * 8)]
>> -	ldr	x17, [x3, #(12 * 8)]
>> -	ldr	x16, [x3, #(11 * 8)]
>> -	ldr	x15, [x3, #(10 * 8)]
>> -	ldr	x14, [x3, #(9 * 8)]
>> -	ldr	x13, [x3, #(8 * 8)]
>> -	ldr	x12, [x3, #(7 * 8)]
>> -	ldr	x11, [x3, #(6 * 8)]
>> -	ldr	x10, [x3, #(5 * 8)]
>> -	ldr	x9, [x3, #(4 * 8)]
>> -	ldr	x8, [x3, #(3 * 8)]
>> -	ldr	x7, [x3, #(2 * 8)]
>> -	ldr	x6, [x3, #(1 * 8)]
>> -	ldr	x5, [x3, #(0 * 8)]
>> -
>> -	adr	x26, 1f
>> -	add	x26, x26, x24, lsl #2
>> -	br	x26
>> -1:
>> -	msr	dbgbvr15_el1, x20
>> -	msr	dbgbvr14_el1, x19
>> -	msr	dbgbvr13_el1, x18
>> -	msr	dbgbvr12_el1, x17
>> -	msr	dbgbvr11_el1, x16
>> -	msr	dbgbvr10_el1, x15
>> -	msr	dbgbvr9_el1, x14
>> -	msr	dbgbvr8_el1, x13
>> -	msr	dbgbvr7_el1, x12
>> -	msr	dbgbvr6_el1, x11
>> -	msr	dbgbvr5_el1, x10
>> -	msr	dbgbvr4_el1, x9
>> -	msr	dbgbvr3_el1, x8
>> -	msr	dbgbvr2_el1, x7
>> -	msr	dbgbvr1_el1, x6
>> -	msr	dbgbvr0_el1, x5
>> -
>> -	add	x3, x2, #CPU_SYSREG_OFFSET(DBGWCR0_EL1)
>> -
>> -	adr	x26, 1f
>> -	add	x26, x26, x25, lsl #2
>> -	br	x26
>> -1:
>> -	ldr	x20, [x3, #(15 * 8)]
>> -	ldr	x19, [x3, #(14 * 8)]
>> -	ldr	x18, [x3, #(13 * 8)]
>> -	ldr	x17, [x3, #(12 * 8)]
>> -	ldr	x16, [x3, #(11 * 8)]
>> -	ldr	x15, [x3, #(10 * 8)]
>> -	ldr	x14, [x3, #(9 * 8)]
>> -	ldr	x13, [x3, #(8 * 8)]
>> -	ldr	x12, [x3, #(7 * 8)]
>> -	ldr	x11, [x3, #(6 * 8)]
>> -	ldr	x10, [x3, #(5 * 8)]
>> -	ldr	x9, [x3, #(4 * 8)]
>> -	ldr	x8, [x3, #(3 * 8)]
>> -	ldr	x7, [x3, #(2 * 8)]
>> -	ldr	x6, [x3, #(1 * 8)]
>> -	ldr	x5, [x3, #(0 * 8)]
>> -
>> -	adr	x26, 1f
>> -	add	x26, x26, x25, lsl #2
>> -	br	x26
>> -1:
>> -	msr	dbgwcr15_el1, x20
>> -	msr	dbgwcr14_el1, x19
>> -	msr	dbgwcr13_el1, x18
>> -	msr	dbgwcr12_el1, x17
>> -	msr	dbgwcr11_el1, x16
>> -	msr	dbgwcr10_el1, x15
>> -	msr	dbgwcr9_el1, x14
>> -	msr	dbgwcr8_el1, x13
>> -	msr	dbgwcr7_el1, x12
>> -	msr	dbgwcr6_el1, x11
>> -	msr	dbgwcr5_el1, x10
>> -	msr	dbgwcr4_el1, x9
>> -	msr	dbgwcr3_el1, x8
>> -	msr	dbgwcr2_el1, x7
>> -	msr	dbgwcr1_el1, x6
>> -	msr	dbgwcr0_el1, x5
>> -
>> -	add	x3, x2, #CPU_SYSREG_OFFSET(DBGWVR0_EL1)
>> -
>> -	adr	x26, 1f
>> -	add	x26, x26, x25, lsl #2
>> -	br	x26
>> -1:
>> -	ldr	x20, [x3, #(15 * 8)]
>> -	ldr	x19, [x3, #(14 * 8)]
>> -	ldr	x18, [x3, #(13 * 8)]
>> -	ldr	x17, [x3, #(12 * 8)]
>> -	ldr	x16, [x3, #(11 * 8)]
>> -	ldr	x15, [x3, #(10 * 8)]
>> -	ldr	x14, [x3, #(9 * 8)]
>> -	ldr	x13, [x3, #(8 * 8)]
>> -	ldr	x12, [x3, #(7 * 8)]
>> -	ldr	x11, [x3, #(6 * 8)]
>> -	ldr	x10, [x3, #(5 * 8)]
>> -	ldr	x9, [x3, #(4 * 8)]
>> -	ldr	x8, [x3, #(3 * 8)]
>> -	ldr	x7, [x3, #(2 * 8)]
>> -	ldr	x6, [x3, #(1 * 8)]
>> -	ldr	x5, [x3, #(0 * 8)]
>> -
>> -	adr	x26, 1f
>> -	add	x26, x26, x25, lsl #2
>> -	br	x26
>> -1:
>> -	msr	dbgwvr15_el1, x20
>> -	msr	dbgwvr14_el1, x19
>> -	msr	dbgwvr13_el1, x18
>> -	msr	dbgwvr12_el1, x17
>> -	msr	dbgwvr11_el1, x16
>> -	msr	dbgwvr10_el1, x15
>> -	msr	dbgwvr9_el1, x14
>> -	msr	dbgwvr8_el1, x13
>> -	msr	dbgwvr7_el1, x12
>> -	msr	dbgwvr6_el1, x11
>> -	msr	dbgwvr5_el1, x10
>> -	msr	dbgwvr4_el1, x9
>> -	msr	dbgwvr3_el1, x8
>> -	msr	dbgwvr2_el1, x7
>> -	msr	dbgwvr1_el1, x6
>> -	msr	dbgwvr0_el1, x5
>> -
>> -	ldr	x21, [x2, #CPU_SYSREG_OFFSET(MDCCINT_EL1)]
>> -	msr	mdccint_el1, x21
>> +	msr	\type\()15_el1, x21
>> +	msr	\type\()14_el1, x20
>> +	msr	\type\()13_el1, x19
>> +	msr	\type\()12_el1, x18
>> +	msr	\type\()11_el1, x17
>> +	msr	\type\()10_el1, x16
>> +	msr	\type\()9_el1, x15
>> +	msr	\type\()8_el1, x14
>> +	msr	\type\()7_el1, x13
>> +	msr	\type\()6_el1, x12
>> +	msr	\type\()5_el1, x11
>> +	msr	\type\()4_el1, x10
>> +	msr	\type\()3_el1, x9
>> +	msr	\type\()2_el1, x8
>> +	msr	\type\()1_el1, x7
>> +	msr	\type\()0_el1, x6
>>  .endm
>>  
>>  .macro skip_32bit_state tmp, target
>> @@ -887,12 +597,61 @@ __restore_sysregs:
>>  	restore_sysregs
>>  	ret
>>  
>> +/* Save debug state */
>>  __save_debug:
>> -	save_debug
>> +	// x2: ptr to CPU context
>> +	// x4/x5/x6-22/x24-26: trashed
>> +
>> +	mrs	x26, id_aa64dfr0_el1
>> +	ubfx	x24, x26, #12, #4	// Extract BRPs
>> +	ubfx	x25, x26, #20, #4	// Extract WRPs
>> +	mov	w26, #15
>> +	sub	w24, w26, w24		// How many BPs to skip
>> +	sub	w25, w26, w25		// How many WPs to skip
>> +
>> +	mov	x5, x24
>> +	add	x4, x2, #CPU_SYSREG_OFFSET(DBGBCR0_EL1)
>> +	save_debug dbgbcr
>> +	add	x4, x2, #CPU_SYSREG_OFFSET(DBGBVR0_EL1)
>> +	save_debug dbgbvr
>> +
>> +	mov	x5, x25
>> +	add	x4, x2, #CPU_SYSREG_OFFSET(DBGWCR0_EL1)
>> +	save_debug dbgwcr
>> +	add	x4, x2, #CPU_SYSREG_OFFSET(DBGWVR0_EL1)
>> +	save_debug dbgwvr
>> +
>> +	mrs	x21, mdccint_el1
>> +	str	x21, [x2, #CPU_SYSREG_OFFSET(MDCCINT_EL1)]
>>  	ret
>>  
>> +/* Restore debug state */
>>  __restore_debug:
>> -	restore_debug
>> +	// x2: ptr to CPU context
>> +	// x4/x5/x6-22/x24-26: trashed
>> +
>> +	mrs	x26, id_aa64dfr0_el1
>> +	ubfx	x24, x26, #12, #4	// Extract BRPs
>> +	ubfx	x25, x26, #20, #4	// Extract WRPs
>> +	mov	w26, #15
>> +	sub	w24, w26, w24		// How many BPs to skip
>> +	sub	w25, w26, w25		// How many WPs to skip
>> +
>> +	mov	x5, x24
>> +	add	x4, x2, #CPU_SYSREG_OFFSET(DBGBCR0_EL1)
>> +	restore_debug dbgbcr
>> +	add	x4, x2, #CPU_SYSREG_OFFSET(DBGBVR0_EL1)
>> +	restore_debug dbgbvr
>> +
>> +	mov	x5, x25
>> +	add	x4, x2, #CPU_SYSREG_OFFSET(DBGWCR0_EL1)
>> +	restore_debug dbgwcr
>> +	add	x4, x2, #CPU_SYSREG_OFFSET(DBGWVR0_EL1)
>> +	restore_debug dbgwvr
>> +
>> +	ldr	x21, [x2, #CPU_SYSREG_OFFSET(MDCCINT_EL1)]
>> +	msr	mdccint_el1, x21
>> +
>>  	ret
>>  
>>  __save_fpsimd:
>> -- 
>> 2.4.3
>> 
>
> Besides the whitespace nit:
> Reviewed-by: Christoffer Dall <christoffer.dall at linaro.org>

-- 
Alex Bennée



More information about the linux-arm-kernel mailing list