[PATCH v6 09/12] KVM: arm64: introduce vcpu->arch.debug_ptr
Alex Bennée
alex.bennee at linaro.org
Wed Jun 24 23:32:27 PDT 2015
Christoffer Dall <christoffer.dall at linaro.org> writes:
> On Fri, Jun 19, 2015 at 01:23:47PM +0100, Alex Bennée wrote:
>> This introduces a level of indirection for the debug registers. Instead
>> of using the sys_regs[] directly we store registers in a structure in
>> the vcpu. As we are no longer tied to the layout of the sys_regs[] we
>> can make the copies size appropriate for control and value registers.
>>
>> This also entails updating the sys_regs code to access this new
>> structure. Instead of passing a register index we now pass an offset
>> into the kvm_guest_debug_arch structure.
>>
>> We also need to ensure the GET/SET_ONE_REG ioctl operations store the
>> registers in their correct location.
>>
>> Signed-off-by: Alex Bennée <alex.bennee at linaro.org>
>>
>> ---
>> v6:
>> - fix up some ws issues
>> - correct clobber info
>> - re-word commentary in kvm_host.h
>> - fix endian access issues for aarch32 fields
>> - revert all KVM_GET/SET_ONE_REG to 64bit (also see ABI update)
>> ---
<snip>
>>
>> +/* Used when AArch32 kernels trap to mapped debug registers */
>> +static inline bool trap_debug32(struct kvm_vcpu *vcpu,
>> + const struct sys_reg_params *p,
>> + const struct sys_reg_desc *rd)
>> +{
>> + __u32 *r = (__u32 *) ((void * )&vcpu->arch.vcpu_debug_state + rd->reg);
>
> This still looks like something that's asking for BE trouble. Why not
> access the register as a __u64 as it is and then only special-case it
> somehow for the XVR thingy... Perhaps a separate function, see below.
>
>> + if (p->is_write) {
>> + *r = *vcpu_reg(vcpu, p->Rt);
>> + vcpu->arch.debug_flags |= KVM_ARM64_DEBUG_DIRTY;
>> + } else {
>> + *vcpu_reg(vcpu, p->Rt) = *r;
>> + }
>> +
>> + return true;
>> +}
>> +
>> +static inline bool trap_debug64(struct kvm_vcpu *vcpu,
>> + const struct sys_reg_params *p,
>> + const struct sys_reg_desc *rd)
>> +{
>> + __u64 *r = (__u64 *) ((void * )&vcpu->arch.vcpu_debug_state + rd->reg);
>> + if (p->is_write) {
>> + *r = *vcpu_reg(vcpu, p->Rt);
>> + vcpu->arch.debug_flags |= KVM_ARM64_DEBUG_DIRTY;
>> + } else {
>> + *vcpu_reg(vcpu, p->Rt) = *r;
>> + }
>> +
>> + return true;
>> +}
>> +
>> +static inline void reset_debug64(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd)
>> +{
>> + __u64 *r = (__u64 *) ((void * )&vcpu->arch.vcpu_debug_state + rd->reg);
>> + *r = rd->val;
>> +}
>> +
>> static void reset_amair_el1(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
>> {
>> u64 amair;
>> @@ -240,16 +277,20 @@ static void reset_mpidr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
>> #define DBG_BCR_BVR_WCR_WVR_EL1(n) \
>> /* DBGBVRn_EL1 */ \
>> { Op0(0b10), Op1(0b000), CRn(0b0000), CRm((n)), Op2(0b100), \
>> - trap_debug_regs, reset_val, (DBGBVR0_EL1 + (n)), 0 }, \
>> + trap_debug64, reset_debug64, \
>> + offsetof(struct kvm_guest_debug_arch, dbg_bvr[(n)]), 0 }, \
>> /* DBGBCRn_EL1 */ \
>> { Op0(0b10), Op1(0b000), CRn(0b0000), CRm((n)), Op2(0b101), \
>> - trap_debug_regs, reset_val, (DBGBCR0_EL1 + (n)), 0 }, \
>> + trap_debug64, reset_debug64, \
>> + offsetof(struct kvm_guest_debug_arch, dbg_bcr[(n)]), 0}, \
>> /* DBGWVRn_EL1 */ \
>> { Op0(0b10), Op1(0b000), CRn(0b0000), CRm((n)), Op2(0b110), \
>> - trap_debug_regs, reset_val, (DBGWVR0_EL1 + (n)), 0 }, \
>> + trap_debug64, reset_debug64, \
>> + offsetof(struct kvm_guest_debug_arch, dbg_wvr[(n)]), 0 }, \
>> /* DBGWCRn_EL1 */ \
>> { Op0(0b10), Op1(0b000), CRn(0b0000), CRm((n)), Op2(0b111), \
>> - trap_debug_regs, reset_val, (DBGWCR0_EL1 + (n)), 0 }
>> + trap_debug64, reset_debug64, \
>> + offsetof(struct kvm_guest_debug_arch, dbg_wcr[(n)]), 0}
>>
>> /*
>> * Architected system registers.
>> @@ -502,42 +543,51 @@ static bool trap_dbgidr(struct kvm_vcpu *vcpu,
>> }
>> }
>>
>> -static bool trap_debug32(struct kvm_vcpu *vcpu,
>> - const struct sys_reg_params *p,
>> - const struct sys_reg_desc *r)
>> -{
>> - if (p->is_write) {
>> - vcpu_cp14(vcpu, r->reg) = *vcpu_reg(vcpu, p->Rt);
>> - vcpu->arch.debug_flags |= KVM_ARM64_DEBUG_DIRTY;
>> - } else {
>> - *vcpu_reg(vcpu, p->Rt) = vcpu_cp14(vcpu, r->reg);
>> - }
>> -
>> - return true;
>> -}
>> +/* AArch32 debug register mappings
>> + *
>> + * AArch32 DBGBVRn is mapped to DBGBVRn_EL1[31:0]
>> + * AArch32 DBGBXVRn is mapped to DBGBVRn_EL1[63:32]
>> + *
>> + * All control registers and watchpoint value registers are mapped to
>> + * the lower 32 bits of their AArch64 equivalents.
>> + *
>> + * We also need to ensure we deal with endian differences when
>> + * mapping a partial AArch64 register.
>> + */
>>
>> -#define DBG_BCR_BVR_WCR_WVR(n) \
>> - /* DBGBVRn */ \
>> - { Op1( 0), CRn( 0), CRm((n)), Op2( 4), trap_debug32, \
>> - NULL, (cp14_DBGBVR0 + (n) * 2) }, \
>> - /* DBGBCRn */ \
>> - { Op1( 0), CRn( 0), CRm((n)), Op2( 5), trap_debug32, \
>> - NULL, (cp14_DBGBCR0 + (n) * 2) }, \
>> - /* DBGWVRn */ \
>> - { Op1( 0), CRn( 0), CRm((n)), Op2( 6), trap_debug32, \
>> - NULL, (cp14_DBGWVR0 + (n) * 2) }, \
>> - /* DBGWCRn */ \
>> - { Op1( 0), CRn( 0), CRm((n)), Op2( 7), trap_debug32, \
>> - NULL, (cp14_DBGWCR0 + (n) * 2) }
>> -
>> -#define DBGBXVR(n) \
>> - { Op1( 0), CRn( 1), CRm((n)), Op2( 1), trap_debug32, \
>> - NULL, cp14_DBGBXVR0 + n * 2 }
>> +#ifdef CONFIG_CPU_BIG_ENDIAN
>> +#define DBG_AA32_LOW_OFFSET sizeof(__u32)
>> +#define DBG_AA32_HIGH_OFFSET 0
>> +#else
>> +#define DBG_AA32_LOW_OFFSET 0
>> +#define DBG_AA32_HIGH_OFFSET sizeof(__u32)
>> +#endif
>> +
>> +#define DBG_BCR_BVR_WCR_WVR(n) \
>> + /* DBGBVRn */ \
>> + { Op1( 0), CRn( 0), CRm((n)), Op2( 4), trap_debug32, \
>> + NULL, offsetof(struct kvm_guest_debug_arch, dbg_bvr[(n)]) \
>> + + DBG_AA32_LOW_OFFSET }, \
>> + /* DBGBCRn */ \
>> + { Op1( 0), CRn( 0), CRm((n)), Op2( 5), trap_debug32, \
>> + NULL, offsetof(struct kvm_guest_debug_arch, dbg_bcr[(n)]) }, \
>
> why doesn't this need + DBG_AA32_LOW_OFFSET?
It didn't before as it was a 32bit register, but of course last version
I moved it back to 64 bit and failed to catch that. Thanks!
>
>> + /* DBGWVRn */ \
>> + { Op1( 0), CRn( 0), CRm((n)), Op2( 6), trap_debug32, \
>> + NULL, offsetof(struct kvm_guest_debug_arch, dbg_wvr[(n)]) \
>> + + DBG_AA32_LOW_OFFSET }, \
>> + /* DBGWCRn */ \
>> + { Op1( 0), CRn( 0), CRm((n)), Op2( 7), trap_debug32, \
>> + NULL, offsetof(struct kvm_guest_debug_arch, dbg_wcr[(n)]) }
>
> ditto ?
>
> I find this quite hard to read and adding this offset on the separate
> line doesn't seem to help.
>
> Perhaps you should just bite the bullet and have separate accessor
> functions for the wvr/wcr/bcr/bvr arrays and just pass the register
> number.
I suspect it would be cleaner reading for the cost of more boilerplate
code. Should I share the access functions between Aarch64/Aarch32 modes
as well?
>
> Thanks,
> -Christoffer
--
Alex Bennée
More information about the linux-arm-kernel
mailing list