[linux-sunxi] Re: [PATCH v2 3/4] mfd: axp20x: Add a cell for the usb power_supply part of the axp20x PMICs

[Hans de Goede]

Hi,

On 24-06-15 13:23, Lee Jones wrote:
>> Add a cell for the usb power_supply part of the axp20x PMICs.
>
> Why are you duplicating the subject line?

Heh, because some maintainers insist that the main-body part of the
commit message must stand by itself, without needing the subject to be
understandable...

>> Note that this cell is only for the usb power_supply part and not the
>> ac-power / battery-charger / rtc-backup-bat-charger bits.
>>
>> Depending on the board each of those must be enabled / disabled separately
>> in devicetree as most boards do not use all 4. So in dt each one needs its
>> own child-node of the axp20x node. Another reason for using separate child
>> nodes for each is so that other devicetree nodes can have a power-supply
>> property with a phandle referencing a node representing a single
>> power-supply.
>>
>> The decision to use a separate devicetree node for each is reflected on
>> the kernel side by each getting its own mfd-cell / platform_device and
>> platform-driver.
>
> You don't really need to say any of this, as this is the 'norm'.

I agree it should be the norm, but I'm not sure if it actually is, while
working on this I've seen several drivers which instantiate multiple
power-supply class devices from a single mfd-cell. And this is what
Bruno's original patches did, so I would prefer to keep this

> What you didn't mention however, is that you're taking the opportunity
> to fix some formatting issues and that there are no functional changes
> in these lines.

That is the end result of your request to change the indentation to
avoid line-wrapping :)

>
>> Cc: Bruno Prémont <bonbons at linux-vserver.org>
>> Signed-off-by: Hans de Goede <hdegoede at redhat.com>
>> ---
>> Changes in v2:
>> -Use DEFINE_RES_IRQ_NAMED
>> -Change indentation of axp20x_cells initializers to avoid line wrapping
>> ---
>>   drivers/mfd/axp20x.c | 20 ++++++++++++++++----
>>   1 file changed, 16 insertions(+), 4 deletions(-)
>
> Patch looks okay however:
>
> Acked-by: Lee Jones <lee.jones at linaro.org>

Thanks.

Regards,

Hans


>
>> diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
>> index f9a3c2d..ca4a604 100644
>> --- a/drivers/mfd/axp20x.c
>> +++ b/drivers/mfd/axp20x.c
>> @@ -113,6 +113,13 @@ static struct resource axp20x_pek_resources[] = {
>>   	},
>>   };
>>
>> +static struct resource axp20x_usb_power_supply_resources[] = {
>> +	DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_VBUS_PLUGIN, "VBUS_PLUGIN"),
>> +	DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_VBUS_REMOVAL, "VBUS_REMOVAL"),
>> +	DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_VBUS_VALID, "VBUS_VALID"),
>> +	DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_VBUS_NOT_VALID, "VBUS_NOT_VALID"),
>> +};
>> +
>>   static struct resource axp22x_pek_resources[] = {
>>   	{
>>   		.name   = "PEK_DBR",
>> @@ -363,11 +370,16 @@ static const struct regmap_irq_chip axp288_regmap_irq_chip = {
>>
>>   static struct mfd_cell axp20x_cells[] = {
>>   	{
>> -		.name			= "axp20x-pek",
>> -		.num_resources		= ARRAY_SIZE(axp20x_pek_resources),
>> -		.resources		= axp20x_pek_resources,
>> +		.name		= "axp20x-pek",
>> +		.num_resources	= ARRAY_SIZE(axp20x_pek_resources),
>> +		.resources	= axp20x_pek_resources,
>>   	}, {
>> -		.name			= "axp20x-regulator",
>> +		.name		= "axp20x-regulator",
>> +	}, {
>> +		.name		= "axp20x-usb-power-supply",
>> +		.of_compatible	= "x-powers,axp202-usb-power-supply",
>> +		.num_resources	= ARRAY_SIZE(axp20x_usb_power_supply_resources),
>> +		.resources	= axp20x_usb_power_supply_resources,
>>   	},
>>   };
>>
>