[PATCH 05/17] phy: omap-usb2: Add a new compatible string for USB2 PHY2

[Roger Quadros]

On Tue, 23 Jun 2015 17:28:50 +0530
Kishon Vijay Abraham I <kishon at ti.com> wrote:

> The USB2 PHY2 has a different register map compared to USB2 PHY1
> to power on/off the PHY. In order to handle it, add a new
> "compatible" string.
> 
> Signed-off-by: Kishon Vijay Abraham I <kishon at ti.com>
> ---
>  Documentation/devicetree/bindings/phy/ti-phy.txt |    2 ++
>  drivers/phy/phy-omap-usb2.c                      |    9 +++++++++
>  2 files changed, 11 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt
> index 52c7a92..b9101b9 100644
> --- a/Documentation/devicetree/bindings/phy/ti-phy.txt
> +++ b/Documentation/devicetree/bindings/phy/ti-phy.txt
> @@ -31,6 +31,8 @@ OMAP USB2 PHY
>  
>  Required properties:
>   - compatible: Should be "ti,omap-usb2"
> +	       Should be "ti,dra7x-usb2-phy2" for the 2nd instance of USB2 PHY
> +			in DRA7x
>   - reg : Address and length of the register set for the device.
>   - #phy-cells: determine the number of cells that should be given in the
>     phandle while referencing this phy.
> diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/phy-omap-usb2.c
> index b5c266a..2f7220f 100644
> --- a/drivers/phy/phy-omap-usb2.c
> +++ b/drivers/phy/phy-omap-usb2.c
> @@ -159,6 +159,11 @@ static const struct usb_phy_data dra7x_usb2_data = {
>  	.flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT,
>  };
>  
> +static const struct usb_phy_data dra7x_usb2_phy2_data = {
> +	.label = "dra7x_usb2_phy2",
> +	.flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT,

Isn't it better to define the register map in usb_phy_data
so that you don't need to check for compatible flag everytime?

> +};
> +
>  static const struct usb_phy_data am437x_usb2_data = {
>  	.label = "am437x_usb2",
>  	.flags =  0,
> @@ -178,6 +183,10 @@ static const struct of_device_id omap_usb2_id_table[] = {
>  		.data = &dra7x_usb2_data,
>  	},
>  	{
> +		.compatible = "ti,dra7x-usb2-phy2",
> +		.data = &dra7x_usb2_phy2_data,
> +	},
> +	{
>  		.compatible = "ti,am437x-usb2",
>  		.data = &am437x_usb2_data,
>  	},
> -- 
> 1.7.9.5
> 

cheers,
-roger