[PATCH v2 0/2] Implement sample time consideration for Vybrid's ADC

Sanchayan Maity maitysanchayan at gmail.com
Wed Jun 24 01:33:39 PDT 2015


This patchset adds a dt binding for specifying sample time
for the vybrid adc driver and takes this into account for
sampling frequency calculation and related configuration in
the driver.

The patchset is based on top of Stefan's patches here

which got recently applied. Tested with shawn's for-next

Changes since v1:

Change from a vendor specific fsl,min-sample-time to non vendor
specific min-sample-time.

Version 1 of the patchset can be found here

- Sanchayan.

Sanchayan Maity (2):
  iio: adc: Determine sampling frequencies by using minimum sample time
  ARM: dts: vfxxx: Add property for minimum sample time

 .../devicetree/bindings/iio/adc/vf610-adc.txt      |  6 ++
 arch/arm/boot/dts/vfxxx.dtsi                       |  2 +
 drivers/iio/adc/vf610_adc.c                        | 74 ++++++++++++++++++++--
 3 files changed, 78 insertions(+), 4 deletions(-)


More information about the linux-arm-kernel mailing list