[PATCH 0/4] [New SoC] Add support for RC Module's K1879XB1YA
Andrew Andrianov
andrew at ncrmnt.org
Tue Jun 23 08:50:00 PDT 2015
This patchset adds the very basic support for RC Module's K1879XB1YA SoC
and MB77.07 Reference Design. It is currently tested against 4.1-rc8
The K1879XB1YA is a hybrid SoC featuring one ARM1176JZF-S Core, one
NeuroMatrix DSP Core.
What's working:
* earlyprintk and the usual platform stuff
* interrupts (PL192 VIC)
* cpuidle
* OHCI/EHCI (ehci-platform and ohci-platform)
* PrimeCell PL061 GPIO lines
* PrimeCell PL022 SPI
* 8250-compatible serial ports
* SP805 Watchdog
* SP804 Timer
This patchset (The dts part of it, due to a few constants) depends on ion-physmem
driver that has already been submitted to LKML and is (still) pending review.
See: https://lkml.org/lkml/2015/6/22/323
Links to product pages:
http://www.module.ru/en/catalog/micro/micro_pc/
http://www.module.ru/en/catalog/micro/mikroshema_dekodera_cifrovogo_televizionnogo_signala_sbis_k1879hb1ya/
RC Module's github page:
https://github.com/RC-MODULE/
Andrew Andrianov (4):
ARM: rcm-k1879xb1: Add support for K1879XB1 SoC
of: Add vendor prefix for RC Module
ARM: dts: rcm-k1879xb1: Add dts files for K1879XB1YA
ARM: Add defconfig for RC Module K1879XB1YA SoC
.../devicetree/bindings/vendor-prefixes.txt | 1 +
arch/arm/Kconfig | 19 +
arch/arm/Kconfig.debug | 5 +-
arch/arm/Makefile | 1 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/rcm-k1879xb1-mb7707.dts | 158 ++
arch/arm/boot/dts/rcm-k1879xb1.dtsi | 521 ++++
arch/arm/configs/rcm_k1879xb1ya_defconfig | 2638 ++++++++++++++++++++
arch/arm/mach-rcm-k1879xb1/Kconfig | 0
arch/arm/mach-rcm-k1879xb1/Makefile | 2 +
arch/arm/mach-rcm-k1879xb1/Makefile.boot | 4 +
arch/arm/mach-rcm-k1879xb1/board-dt.c | 152 ++
arch/arm/mach-rcm-k1879xb1/cpuidle.c | 48 +
arch/arm/mach-rcm-k1879xb1/include/mach/hardware.h | 75 +
.../mach-rcm-k1879xb1/include/mach/uncompress.h | 54 +
15 files changed, 3678 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/rcm-k1879xb1-mb7707.dts
create mode 100644 arch/arm/boot/dts/rcm-k1879xb1.dtsi
create mode 100644 arch/arm/configs/rcm_k1879xb1ya_defconfig
create mode 100644 arch/arm/mach-rcm-k1879xb1/Kconfig
create mode 100644 arch/arm/mach-rcm-k1879xb1/Makefile
create mode 100644 arch/arm/mach-rcm-k1879xb1/Makefile.boot
create mode 100644 arch/arm/mach-rcm-k1879xb1/board-dt.c
create mode 100644 arch/arm/mach-rcm-k1879xb1/cpuidle.c
create mode 100644 arch/arm/mach-rcm-k1879xb1/include/mach/hardware.h
create mode 100644 arch/arm/mach-rcm-k1879xb1/include/mach/uncompress.h
--
2.1.4
More information about the linux-arm-kernel
mailing list