[PATCH] iio: adc: at91_adc: allow to use full range of startup time

[Jonathan Cameron]

On 18/06/15 15:02, Alexandre Belloni wrote:
> On 17/06/2015 at 18:21:36 +0200, Nicolas Ferre wrote :
>> From: Jan Leupold <leupold at rsi-elektrotechnik.de>
>>
>> The DT-Property "atmel,adc-startup-time" is stored in an u8 for a microsecond
>> value. When trying to increase the value of STARTUP in Register AT91_ADC_MR
>> some higher values can't be reached.
>>
>> Change the type in function parameter and private structure field from u8 to
>> u32.
>>
>> Signed-off-by: Jan Leupold <leupold at rsi-elektrotechnik.de>
>> [nicolas.ferre at atmel.com: change commit message, increase u16 to u32 for startup time]
>> Signed-off-by: Nicolas Ferre <nicolas.ferre at atmel.com>
> Acked-by: Alexandre Belloni <alexandre.belloni at free-electrons.com>
Applied to the fixes-togreg branch of iio.git and marked for stable.
Probably won't now go upstream until post merge window.

Thanks,

Jonathan
> 
>> ---
>>  drivers/iio/adc/at91_adc.c | 8 ++++----
>>  1 file changed, 4 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c
>> index 8a0eb4a04fb5..7b40925dd4ff 100644
>> --- a/drivers/iio/adc/at91_adc.c
>> +++ b/drivers/iio/adc/at91_adc.c
>> @@ -182,7 +182,7 @@ struct at91_adc_caps {
>>  	u8	ts_pen_detect_sensitivity;
>>  
>>  	/* startup time calculate function */
>> -	u32 (*calc_startup_ticks)(u8 startup_time, u32 adc_clk_khz);
>> +	u32 (*calc_startup_ticks)(u32 startup_time, u32 adc_clk_khz);
>>  
>>  	u8	num_channels;
>>  	struct at91_adc_reg_desc registers;
>> @@ -201,7 +201,7 @@ struct at91_adc_state {
>>  	u8			num_channels;
>>  	void __iomem		*reg_base;
>>  	struct at91_adc_reg_desc *registers;
>> -	u8			startup_time;
>> +	u32			startup_time;
>>  	u8			sample_hold_time;
>>  	bool			sleep_mode;
>>  	struct iio_trigger	**trig;
>> @@ -779,7 +779,7 @@ ret:Acked-by: Alexandre Belloni <alexandre.belloni at free-electrons.com>
>>  	return ret;
>>  }
>>  
>> -static u32 calc_startup_ticks_9260(u8 startup_time, u32 adc_clk_khz)
>> +static u32 calc_startup_ticks_9260(u32 startup_time, u32 adc_clk_khz)
>>  {
>>  	/*
>>  	 * Number of ticks needed to cover the startup time of the ADC
>> @@ -790,7 +790,7 @@ static u32 calc_startup_ticks_9260(u8 startup_time, u32 adc_clk_khz)
>>  	return round_up((startup_time * adc_clk_khz / 1000) - 1, 8) / 8;
>>  }
>>  
>> -static u32 calc_startup_ticks_9x5(u8 startup_time, u32 adc_clk_khz)
>> +static u32 calc_startup_ticks_9x5(u32 startup_time, u32 adc_clk_khz)
>>  {
>>  	/*
>>  	 * For sama5d3x and at91sam9x5, the formula changes to:
>> -- 
>> 2.1.3
>>
>