[PATCH 1/4] ARM: dts: sunxi: Add regulator-boot-on to usb host port regulator nodes
Hans de Goede
hdegoede at redhat.com
Sat Jun 20 08:40:07 PDT 2015
u-boot will have turned on the power to the usb host ports, so mark them
as regulator-boot-on, this stops the power on the ports from temporarily
getting turned off during boot, causing issues with e.g. usb powered
harddisks.
Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
arch/arm/boot/dts/sunxi-common-regulators.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/sunxi-common-regulators.dtsi b/arch/arm/boot/dts/sunxi-common-regulators.dtsi
index 51cc838..f1953b0 100644
--- a/arch/arm/boot/dts/sunxi-common-regulators.dtsi
+++ b/arch/arm/boot/dts/sunxi-common-regulators.dtsi
@@ -108,6 +108,7 @@
regulator-name = "usb1-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
enable-active-high;
gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>;
status = "disabled";
@@ -120,6 +121,7 @@
regulator-name = "usb2-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
enable-active-high;
gpio = <&pio 7 3 GPIO_ACTIVE_HIGH>;
status = "disabled";
--
2.4.3
More information about the linux-arm-kernel
mailing list