[PATCH 0/4] meson: Add and enable DTS for Odroid-C1 and Tronfy MXQ

[Carlo Caione]

On Mon, Jun 8, 2015 at 10:52 AM, Carlo Caione <carlo at caione.org> wrote:
> From: Carlo Caione <carlo at endlessm.com>
>
> This patchset enables Meson8b and add the DTS files for Hardkernel Odroid-C1
> and Tronfy MXQ.
>
> Note that the DTS files depend on the header file that is already submitted
> with the clock driver patches and already present in the clk tree in the
> clk-meson8b branch.
>
> Carlo Caione (4):
>   of: documentation: Add vedor prefix for Hardkernel and Tronfy
>   of: documentation: add bindings documentation for Meson8b
>   ARM: meson: Add DTS for Odroid-C1 and Tronfy MXQ boards
>   ARM: meson: Enable Meson8b SoCs
>
>  Documentation/devicetree/bindings/arm/amlogic.txt  |   6 +
>  .../devicetree/bindings/vendor-prefixes.txt        |   2 +
>  arch/arm/boot/dts/Makefile                         |   3 +
>  arch/arm/boot/dts/meson8b-mxq.dts                  |  65 +++++++++
>  arch/arm/boot/dts/meson8b-odroidc1.dts             |  65 +++++++++
>  arch/arm/boot/dts/meson8b.dtsi                     | 151 +++++++++++++++++++++
>  arch/arm/mach-meson/Kconfig                        |   5 +
>  arch/arm/mach-meson/meson.c                        |   1 +
>  8 files changed, 298 insertions(+)
>  create mode 100644 arch/arm/boot/dts/meson8b-mxq.dts
>  create mode 100644 arch/arm/boot/dts/meson8b-odroidc1.dts
>  create mode 100644 arch/arm/boot/dts/meson8b.dtsi

Any feedback on this?

-- 
Carlo Caione