[PATCH] ARM: keystone: ecc: add ddr3 ecc interrupt handling
santosh shilimkar
santosh.shilimkar at oracle.com
Fri Jun 19 08:35:29 PDT 2015
On 6/18/2015 12:09 PM, Vitaly Andrianov wrote:
> This patch adds ARM L1/L2 ECC handler support and DDR3 ECC interrupt
> handling for Keystone II devices, the kernel will reboot if the error
> is 2-bit error for DDR ECC or L1/L2 ECC error.
>
> Signed-off-by: Hao Zhang <hzhang at ti.com>
> Signed-off-by: Murali Karicheri <m-karicheri2 at ti.com>
> Signed-off-by: Vitaly Andrianov <vitalya at ti.com>
> ---
> arch/arm/mach-keystone/Makefile | 2 +-
> arch/arm/mach-keystone/keystone.c | 63 ++++++++++++++++++++++++--
> arch/arm/mach-keystone/keystone.h | 1 +
> arch/arm/mach-keystone/keystone_ecc.c | 85 +++++++++++++++++++++++++++++++++++
> arch/arm/mach-keystone/platsmp.c | 3 +-
> 5 files changed, 148 insertions(+), 6 deletions(-)
> create mode 100644 arch/arm/mach-keystone/keystone_ecc.c
>
Good to see this one on the list. Thanks for posting Vitaly.
> diff --git a/arch/arm/mach-keystone/Makefile b/arch/arm/mach-keystone/Makefile
> index 25d9239..ea3b9a2 100644
> --- a/arch/arm/mach-keystone/Makefile
> +++ b/arch/arm/mach-keystone/Makefile
> @@ -1,4 +1,4 @@
> -obj-y := keystone.o smc.o
> +obj-y := keystone.o smc.o keystone_ecc.o
>
> plus_sec := $(call as-instr,.arch_extension sec,+sec)
> AFLAGS_smc.o :=-Wa,-march=armv7-a$(plus_sec)
> diff --git a/arch/arm/mach-keystone/keystone.c b/arch/arm/mach-keystone/keystone.c
> index 0662087..e501a78 100644
> --- a/arch/arm/mach-keystone/keystone.c
> +++ b/arch/arm/mach-keystone/keystone.c
> @@ -9,19 +9,24 @@
> * under the terms and conditions of the GNU General Public License,
> * version 2, as published by the Free Software Foundation.
> */
> +#include <linux/dma-mapping.h>
> +#include <linux/interrupt.h>
> +#include <linux/init.h>
> #include <linux/io.h>
> +#include <linux/memblock.h>
> #include <linux/of.h>
> -#include <linux/init.h>
> +#include <linux/of_irq.h>
> #include <linux/of_platform.h>
> #include <linux/of_address.h>
> -#include <linux/memblock.h>
> +#include <linux/reboot.h>
>
> -#include <asm/setup.h>
> +#include <asm/dma-mapping.h>
> #include <asm/mach/map.h>
> #include <asm/mach/arch.h>
> #include <asm/mach/time.h>
> -#include <asm/smp_plat.h>
> #include <asm/memory.h>
> +#include <asm/setup.h>
> +#include <asm/smp_plat.h>
>
If the intent is to sort the headers in alphabetic order, please
do that in a separate patch.
> #include "memory.h"
>
> @@ -49,6 +54,56 @@ static int keystone_platform_notifier(struct notifier_block *nb,
> return NOTIFY_OK;
> }
>
+RMK. Would like to know if he wish to have below code in
generic ARM code
> +#define L2_INTERN_ASYNC_ERROR BIT(30)
> +
> +static irqreturn_t arm_l1l2_ecc_err_irq_handler(int irq, void *reg_virt)
> +{
> + int ret = IRQ_NONE;
> + u32 status, fault;
> +
> + /* read and clear L2ECTLR CP15 register for L2 ECC error */
> + asm("mrc p15, 1, %0, c9, c0, 3" : "=r"(status));
> +
> + if (status & L2_INTERN_ASYNC_ERROR) {
> + status &= ~L2_INTERN_ASYNC_ERROR;
> + asm("mcr p15, 1, %0, c9, c0, 3" : : "r" (status));
> + asm("mcr p15, 0, %0, c5, c1, 0" : "=r" (fault));
> + /*
> + * Do a machine restart as this is double bit ECC error
> + * that can't be corrected
> + */
> + pr_err("ARM Cortex A15 L1/L2 ECC error, CP15 ADFSR 0x%x\n",
> + fault);
> + machine_restart(NULL);
> + ret = IRQ_HANDLED;
> + }
> + return ret;
So your non-double bit errors even though handled returns as IRQ_NONE.
> +}
> +
> +static int __init keystone_init_misc(void)
> +{
> + struct device_node *node = NULL;
> + int error_irq = 0;
> + int ret;
> +
> + /* add ARM ECC L1/L2 cache error handler */
> + node = of_find_compatible_node(NULL, NULL, "ti,keystone-sys");
Is this a new bidning ? You need to propose that binding and get
it documented.
Moreover, "ti,keystone-sys" doesn't make sense here for generic
cortext-A15 ECC error handler.
> + if (node)
> + error_irq = irq_of_parse_and_map(node, 0);
> + if (!error_irq) {
> + pr_warn("Warning!! arm L1/L2 ECC irq number not defined\n");
> + return 0;
> + }
> + if (request_irq(error_irq, arm_l1l2_ecc_err_irq_handler, 0,
> + "a15-l1l2-ecc-err-irq", 0) < 0) {
> + WARN_ON("request_irq fail for arm L1/L2 ECC error irq\n");
> + }
> +
> + ret = keystone_init_ddr3_ecc(node);
Please split the Corext A15 L1/L2 ECC and DDR3 ECC error handling in
tow separate patches.
> diff --git a/arch/arm/mach-keystone/keystone.h b/arch/arm/mach-keystone/keystone.h
> index cd04a1c..ff52243 100644
> --- a/arch/arm/mach-keystone/keystone.h
> +++ b/arch/arm/mach-keystone/keystone.h
> @@ -19,6 +19,7 @@ extern struct smp_operations keystone_smp_ops;
> extern void secondary_startup(void);
> extern u32 keystone_cpu_smc(u32 command, u32 cpu, u32 addr);
> extern int keystone_pm_runtime_init(void);
> +extern int keystone_init_ddr3_ecc(struct device_node *node);
>
> #endif /* __ASSEMBLER__ */
> #endif /* __KEYSTONE_H__ */
> diff --git a/arch/arm/mach-keystone/keystone_ecc.c b/arch/arm/mach-keystone/keystone_ecc.c
> new file mode 100644
> index 0000000..a42fadb
> --- /dev/null
> +++ b/arch/arm/mach-keystone/keystone_ecc.c
> @@ -0,0 +1,85 @@
> +/*
> + * Copyright 2014 Texas Instruments, Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +#include <linux/io.h>
> +#include <linux/of.h>
> +#include <linux/init.h>
> +#include <linux/interrupt.h>
> +#include <linux/of_irq.h>
> +#include <linux/of_platform.h>
> +#include <linux/of_address.h>
> +#include <linux/reboot.h>
> +#include "keystone.h"
> +
Justcheck whether you need all abobe headers for below code ?
> +/* DDR3 controller registers */
> +#define DDR3_EOI 0x0A0
> +#define DDR3_IRQ_STATUS_RAW_SYS 0x0A4
> +#define DDR3_IRQ_STATUS_SYS 0x0AC
> +#define DDR3_IRQ_ENABLE_SET_SYS 0x0B4
> +#define DDR3_IRQ_ENABLE_CLR_SYS 0x0BC
> +#define DDR3_ECC_CTRL 0x110
> +#define DDR3_ONE_BIT_ECC_ERR_CNT 0x130
> +
> +#define DDR3_1B_ECC_ERR BIT(5)
> +#define DDR3_2B_ECC_ERR BIT(4)
> +#define DDR3_WR_ECC_ERR BIT(3)
> +
> +static irqreturn_t ddr3_ecc_err_irq_handler(int irq, void *reg_virt)
> +{
> + int ret = IRQ_NONE;
> + u32 irq_status;
> + void __iomem *ddr_reg = (void __iomem *)reg_virt;
> +
> + irq_status = readl(ddr_reg + DDR3_IRQ_STATUS_SYS);
> + if ((irq_status & DDR3_2B_ECC_ERR) ||
> + (irq_status & DDR3_WR_ECC_ERR)) {
> + pr_err("Unrecoverable DDR3 ECC error, irq status 0x%x, rebooting kernel ..\n",
> + irq_status);
> + machine_restart(NULL);
> + ret = IRQ_HANDLED;
> + }
> + return ret;
> +}
> +
> +int keystone_init_ddr3_ecc(struct device_node *node)
> +{
> + void __iomem *ddr_reg;
> + int error_irq = 0;
> + int ret;
> +
> + /* ddr3 controller reg is configured in the sysctrl node at index 0 */
> + ddr_reg = of_iomap(node, 0);
> + if (!ddr_reg) {
> + pr_warn("Warning!! DDR3 controller regs not defined\n");
> + return -ENODEV;
> + }
> +
> + /* add DDR3 ECC error handler */
> + error_irq = irq_of_parse_and_map(node, 1);
> + if (!error_irq) {
> + /* No GIC interrupt, need to map CIC2 interrupt to GIC */
> + pr_warn("Warning!! DDR3 ECC irq number not defined\n");
> + return -ENODEV;
> + }
> +
You should probably check here if there is already an ECC error happened
till you reach here and take appropriate action. If its not safe to
boot because of double bit error, you need to abort the boot.
> + ret = request_irq(error_irq, ddr3_ecc_err_irq_handler, 0,
> + "ddr3-ecc-err-irq", (void *)ddr_reg);
> + if (ret) {
> + WARN_ON("request_irq fail for DDR3 ECC error irq\n");
> + return ret;
> + }
> +
> + return 0;
> +}
> diff --git a/arch/arm/mach-keystone/platsmp.c b/arch/arm/mach-keystone/platsmp.c
> index 5f46a7c..07402b9 100644
> --- a/arch/arm/mach-keystone/platsmp.c
> +++ b/arch/arm/mach-keystone/platsmp.c
> @@ -13,8 +13,9 @@
> */
>
> #include <linux/init.h>
> -#include <linux/smp.h>
> #include <linux/io.h>
> +#include <linux/of.h>
> +#include <linux/smp.h>
>
Why do you need of.h in this file ?
More information about the linux-arm-kernel
mailing list