[RFC PATCH 8/8] powerpc/fsl: Use new clockgen binding

Scott Wood scottwood at freescale.com
Thu Jun 18 19:49:18 PDT 2015


The driver retains compatibility with old device trees, but we don't
want the old nodes lying around to be copied, or used as a reference
(some of the mux options are incorrect), or even just being clutter.

We will also need the #clock-cells in the clockgen node in order to
add fman nodes.

Signed-off-by: Scott Wood <scottwood at freescale.com>
---
 arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi     |  4 +-
 arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi     |  8 +--
 arch/powerpc/boot/dts/fsl/b4si-post.dtsi       | 15 ------
 arch/powerpc/boot/dts/fsl/p2041si-post.dtsi    | 18 -------
 arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi     |  8 +--
 arch/powerpc/boot/dts/fsl/p3041si-post.dtsi    | 18 -------
 arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi     |  8 +--
 arch/powerpc/boot/dts/fsl/p4080si-post.dtsi    | 70 --------------------------
 arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi     | 16 +++---
 arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi     |  4 +-
 arch/powerpc/boot/dts/fsl/p5040si-post.dtsi    | 18 -------
 arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi     |  8 +--
 arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi | 50 +-----------------
 arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi | 33 +-----------
 arch/powerpc/boot/dts/fsl/t1023si-post.dtsi    | 16 ------
 arch/powerpc/boot/dts/fsl/t102xsi-pre.dtsi     |  4 +-
 arch/powerpc/boot/dts/fsl/t1040si-post.dtsi    | 44 ----------------
 arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi     |  8 +--
 arch/powerpc/boot/dts/fsl/t2081si-post.dtsi    | 22 --------
 arch/powerpc/boot/dts/fsl/t208xsi-pre.dtsi     |  8 +--
 arch/powerpc/boot/dts/fsl/t4240si-post.dtsi    | 61 ----------------------
 arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi     | 24 ++++-----
 22 files changed, 54 insertions(+), 411 deletions(-)

diff --git a/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi b/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi
index 338af7e..9cfeaef 100644
--- a/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi
@@ -64,14 +64,14 @@
 		cpu0: PowerPC,e6500 at 0 {
 			device_type = "cpu";
 			reg = <0 1>;
-			clocks = <&mux0>;
+			clocks = <&clockgen 1 0>;
 			next-level-cache = <&L2>;
 			fsl,portid-mapping = <0x80000000>;
 		};
 		cpu1: PowerPC,e6500 at 2 {
 			device_type = "cpu";
 			reg = <2 3>;
-			clocks = <&mux0>;
+			clocks = <&clockgen 1 0>;
 			next-level-cache = <&L2>;
 			fsl,portid-mapping = <0x80000000>;
 		};
diff --git a/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi b/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi
index 1948f73..bc914f2 100644
--- a/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi
@@ -64,28 +64,28 @@
 		cpu0: PowerPC,e6500 at 0 {
 			device_type = "cpu";
 			reg = <0 1>;
-			clocks = <&mux0>;
+			clocks = <&clockgen 1 0>;
 			next-level-cache = <&L2>;
 			fsl,portid-mapping = <0x80000000>;
 		};
 		cpu1: PowerPC,e6500 at 2 {
 			device_type = "cpu";
 			reg = <2 3>;
-			clocks = <&mux0>;
+			clocks = <&clockgen 1 0>;
 			next-level-cache = <&L2>;
 			fsl,portid-mapping = <0x80000000>;
 		};
 		cpu2: PowerPC,e6500 at 4 {
 			device_type = "cpu";
 			reg = <4 5>;
-			clocks = <&mux0>;
+			clocks = <&clockgen 1 0>;
 			next-level-cache = <&L2>;
 			fsl,portid-mapping = <0x80000000>;
 		};
 		cpu3: PowerPC,e6500 at 6 {
 			device_type = "cpu";
 			reg = <6 7>;
-			clocks = <&mux0>;
+			clocks = <&clockgen 1 0>;
 			next-level-cache = <&L2>;
 			fsl,portid-mapping = <0x80000000>;
 		};
diff --git a/arch/powerpc/boot/dts/fsl/b4si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4si-post.dtsi
index 603910a..004477d 100644
--- a/arch/powerpc/boot/dts/fsl/b4si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/b4si-post.dtsi
@@ -398,21 +398,6 @@
 	};
 
 /include/ "qoriq-clockgen2.dtsi"
-	clockgen: global-utilities at e1000 {
-		compatible = "fsl,b4-clockgen", "fsl,qoriq-clockgen-2.0";
-		reg = <0xe1000 0x1000>;
-
-		mux0: mux0 at 0 {
-			#clock-cells = <0>;
-			reg = <0x0 0x4>;
-			compatible = "fsl,qoriq-core-mux-2.0";
-			clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
-				<&pll1 0>, <&pll1 1>, <&pll1 2>;
-			clock-names = "pll0", "pll0-div2", "pll0-div4",
-				"pll1", "pll1-div2", "pll1-div4";
-			clock-output-names = "cmux0";
-		};
-	};
 
 	rcpm: global-utilities at e2000 {
 		compatible = "fsl,b4-rcpm", "fsl,qoriq-rcpm-2.0";
diff --git a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
index 04ad177..9c16a16 100644
--- a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
@@ -327,24 +327,6 @@
 /include/ "qoriq-clockgen1.dtsi"
 	global-utilities at e1000 {
 		compatible = "fsl,p2041-clockgen", "fsl,qoriq-clockgen-1.0";
-
-		mux2: mux2 at 40 {
-			#clock-cells = <0>;
-			reg = <0x40 0x4>;
-			compatible = "fsl,qoriq-core-mux-1.0";
-			clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
-			clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
-			clock-output-names = "cmux2";
-		};
-
-		mux3: mux3 at 60 {
-			#clock-cells = <0>;
-			reg = <0x60 0x4>;
-			compatible = "fsl,qoriq-core-mux-1.0";
-			clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
-			clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
-			clock-output-names = "cmux3";
-		};
 	};
 
 	rcpm: global-utilities at e2000 {
diff --git a/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi
index b1ea147..0babd84 100644
--- a/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi
@@ -81,7 +81,7 @@
 		cpu0: PowerPC,e500mc at 0 {
 			device_type = "cpu";
 			reg = <0>;
-			clocks = <&mux0>;
+			clocks = <&clockgen 1 0>;
 			next-level-cache = <&L2_0>;
 			fsl,portid-mapping = <0x80000000>;
 			L2_0: l2-cache {
@@ -91,7 +91,7 @@
 		cpu1: PowerPC,e500mc at 1 {
 			device_type = "cpu";
 			reg = <1>;
-			clocks = <&mux1>;
+			clocks = <&clockgen 1 1>;
 			next-level-cache = <&L2_1>;
 			fsl,portid-mapping = <0x40000000>;
 			L2_1: l2-cache {
@@ -101,7 +101,7 @@
 		cpu2: PowerPC,e500mc at 2 {
 			device_type = "cpu";
 			reg = <2>;
-			clocks = <&mux2>;
+			clocks = <&clockgen 1 2>;
 			next-level-cache = <&L2_2>;
 			fsl,portid-mapping = <0x20000000>;
 			L2_2: l2-cache {
@@ -111,7 +111,7 @@
 		cpu3: PowerPC,e500mc at 3 {
 			device_type = "cpu";
 			reg = <3>;
-			clocks = <&mux3>;
+			clocks = <&clockgen 1 3>;
 			next-level-cache = <&L2_3>;
 			fsl,portid-mapping = <0x10000000>;
 			L2_3: l2-cache {
diff --git a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
index 2cab18a..eeefc09 100644
--- a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
@@ -354,24 +354,6 @@
 /include/ "qoriq-clockgen1.dtsi"
 	global-utilities at e1000 {
 		compatible = "fsl,p3041-clockgen", "fsl,qoriq-clockgen-1.0";
-
-		mux2: mux2 at 40 {
-			#clock-cells = <0>;
-			reg = <0x40 0x4>;
-			compatible = "fsl,qoriq-core-mux-1.0";
-			clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
-			clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
-			clock-output-names = "cmux2";
-		};
-
-		mux3: mux3 at 60 {
-			#clock-cells = <0>;
-			reg = <0x60 0x4>;
-			compatible = "fsl,qoriq-core-mux-1.0";
-			clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
-			clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
-			clock-output-names = "cmux3";
-		};
 	};
 
 	rcpm: global-utilities at e2000 {
diff --git a/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi
index dc5f4b3..2b331b2 100644
--- a/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi
@@ -82,7 +82,7 @@
 		cpu0: PowerPC,e500mc at 0 {
 			device_type = "cpu";
 			reg = <0>;
-			clocks = <&mux0>;
+			clocks = <&clockgen 1 0>;
 			next-level-cache = <&L2_0>;
 			fsl,portid-mapping = <0x80000000>;
 			L2_0: l2-cache {
@@ -92,7 +92,7 @@
 		cpu1: PowerPC,e500mc at 1 {
 			device_type = "cpu";
 			reg = <1>;
-			clocks = <&mux1>;
+			clocks = <&clockgen 1 1>;
 			next-level-cache = <&L2_1>;
 			fsl,portid-mapping = <0x40000000>;
 			L2_1: l2-cache {
@@ -102,7 +102,7 @@
 		cpu2: PowerPC,e500mc at 2 {
 			device_type = "cpu";
 			reg = <2>;
-			clocks = <&mux2>;
+			clocks = <&clockgen 1 2>;
 			next-level-cache = <&L2_2>;
 			fsl,portid-mapping = <0x20000000>;
 			L2_2: l2-cache {
@@ -112,7 +112,7 @@
 		cpu3: PowerPC,e500mc at 3 {
 			device_type = "cpu";
 			reg = <3>;
-			clocks = <&mux3>;
+			clocks = <&clockgen 1 3>;
 			next-level-cache = <&L2_3>;
 			fsl,portid-mapping = <0x10000000>;
 			L2_3: l2-cache {
diff --git a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
index dfc76bc..b4403dd 100644
--- a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
@@ -374,76 +374,6 @@
 /include/ "qoriq-clockgen1.dtsi"
 	global-utilities at e1000 {
 		compatible = "fsl,p4080-clockgen", "fsl,qoriq-clockgen-1.0";
-
-		pll2: pll2 at 840 {
-			#clock-cells = <1>;
-			reg = <0x840 0x4>;
-			compatible = "fsl,qoriq-core-pll-1.0";
-			clocks = <&sysclk>;
-			clock-output-names = "pll2", "pll2-div2";
-		};
-
-		pll3: pll3 at 860 {
-			#clock-cells = <1>;
-			reg = <0x860 0x4>;
-			compatible = "fsl,qoriq-core-pll-1.0";
-			clocks = <&sysclk>;
-			clock-output-names = "pll3", "pll3-div2";
-		};
-
-		mux2: mux2 at 40 {
-			#clock-cells = <0>;
-			reg = <0x40 0x4>;
-			compatible = "fsl,qoriq-core-mux-1.0";
-			clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
-			clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
-			clock-output-names = "cmux2";
-		};
-
-		mux3: mux3 at 60 {
-			#clock-cells = <0>;
-			reg = <0x60 0x4>;
-			compatible = "fsl,qoriq-core-mux-1.0";
-			clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
-			clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
-			clock-output-names = "cmux3";
-		};
-
-		mux4: mux4 at 80 {
-			#clock-cells = <0>;
-			reg = <0x80 0x4>;
-			compatible = "fsl,qoriq-core-mux-1.0";
-			clocks = <&pll2 0>, <&pll2 1>, <&pll3 0>, <&pll3 1>;
-			clock-names = "pll2", "pll2-div2", "pll3", "pll3-div2";
-			clock-output-names = "cmux4";
-		};
-
-		mux5: mux5 at a0 {
-			#clock-cells = <0>;
-			reg = <0xa0 0x4>;
-			compatible = "fsl,qoriq-core-mux-1.0";
-			clocks = <&pll2 0>, <&pll2 1>, <&pll3 0>, <&pll3 1>;
-			clock-names = "pll2", "pll2-div2", "pll3", "pll3-div2";
-			clock-output-names = "cmux5";
-		};
-
-		mux6: mux6 at c0 {
-			#clock-cells = <0>;
-			reg = <0xc0 0x4>;
-			compatible = "fsl,qoriq-core-mux-1.0";
-			clocks = <&pll2 0>, <&pll2 1>, <&pll3 0>, <&pll3 1>;
-			clock-names = "pll2", "pll2-div2", "pll3", "pll3-div2";
-			clock-output-names = "cmux6";
-		};
-
-		mux7: mux7 at e0 {
-			#clock-cells = <0>;
-			reg = <0xe0 0x4>;
-			compatible = "fsl,qoriq-core-mux-1.0";
-			clocks = <&pll2 0>, <&pll2 1>, <&pll3 0>, <&pll3 1>;
-			clock-names = "pll2", "pll2-div2", "pll3", "pll3-div2";
-			clock-output-names = "cmux7";
-		};
 	};
 
 	rcpm: global-utilities at e2000 {
diff --git a/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi
index 38bde09..a3ea73c 100644
--- a/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi
@@ -81,7 +81,7 @@
 		cpu0: PowerPC,e500mc at 0 {
 			device_type = "cpu";
 			reg = <0>;
-			clocks = <&mux0>;
+			clocks = <&clockgen 1 0>;
 			next-level-cache = <&L2_0>;
 			fsl,portid-mapping = <0x80000000>;
 			L2_0: l2-cache {
@@ -91,7 +91,7 @@
 		cpu1: PowerPC,e500mc at 1 {
 			device_type = "cpu";
 			reg = <1>;
-			clocks = <&mux1>;
+			clocks = <&clockgen 1 1>;
 			next-level-cache = <&L2_1>;
 			fsl,portid-mapping = <0x40000000>;
 			L2_1: l2-cache {
@@ -101,7 +101,7 @@
 		cpu2: PowerPC,e500mc at 2 {
 			device_type = "cpu";
 			reg = <2>;
-			clocks = <&mux2>;
+			clocks = <&clockgen 1 2>;
 			next-level-cache = <&L2_2>;
 			fsl,portid-mapping = <0x20000000>;
 			L2_2: l2-cache {
@@ -111,7 +111,7 @@
 		cpu3: PowerPC,e500mc at 3 {
 			device_type = "cpu";
 			reg = <3>;
-			clocks = <&mux3>;
+			clocks = <&clockgen 1 3>;
 			next-level-cache = <&L2_3>;
 			fsl,portid-mapping = <0x10000000>;
 			L2_3: l2-cache {
@@ -121,7 +121,7 @@
 		cpu4: PowerPC,e500mc at 4 {
 			device_type = "cpu";
 			reg = <4>;
-			clocks = <&mux4>;
+			clocks = <&clockgen 1 4>;
 			next-level-cache = <&L2_4>;
 			fsl,portid-mapping = <0x08000000>;
 			L2_4: l2-cache {
@@ -131,7 +131,7 @@
 		cpu5: PowerPC,e500mc at 5 {
 			device_type = "cpu";
 			reg = <5>;
-			clocks = <&mux5>;
+			clocks = <&clockgen 1 5>;
 			next-level-cache = <&L2_5>;
 			fsl,portid-mapping = <0x04000000>;
 			L2_5: l2-cache {
@@ -141,7 +141,7 @@
 		cpu6: PowerPC,e500mc at 6 {
 			device_type = "cpu";
 			reg = <6>;
-			clocks = <&mux6>;
+			clocks = <&clockgen 1 6>;
 			next-level-cache = <&L2_6>;
 			fsl,portid-mapping = <0x02000000>;
 			L2_6: l2-cache {
@@ -151,7 +151,7 @@
 		cpu7: PowerPC,e500mc at 7 {
 			device_type = "cpu";
 			reg = <7>;
-			clocks = <&mux7>;
+			clocks = <&clockgen 1 7>;
 			next-level-cache = <&L2_7>;
 			fsl,portid-mapping = <0x01000000>;
 			L2_7: l2-cache {
diff --git a/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi
index 1cc61e1..f3b2188 100644
--- a/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi
@@ -88,7 +88,7 @@
 		cpu0: PowerPC,e5500 at 0 {
 			device_type = "cpu";
 			reg = <0>;
-			clocks = <&mux0>;
+			clocks = <&clockgen 1 0>;
 			next-level-cache = <&L2_0>;
 			fsl,portid-mapping = <0x80000000>;
 			L2_0: l2-cache {
@@ -98,7 +98,7 @@
 		cpu1: PowerPC,e5500 at 1 {
 			device_type = "cpu";
 			reg = <1>;
-			clocks = <&mux1>;
+			clocks = <&clockgen 1 1>;
 			next-level-cache = <&L2_1>;
 			fsl,portid-mapping = <0x40000000>;
 			L2_1: l2-cache {
diff --git a/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi
index 6d21452..8ba35ca 100644
--- a/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi
@@ -319,24 +319,6 @@
 /include/ "qoriq-clockgen1.dtsi"
 	global-utilities at e1000 {
 		compatible = "fsl,p5040-clockgen", "fsl,qoriq-clockgen-1.0";
-
-		mux2: mux2 at 40 {
-			#clock-cells = <0>;
-			reg = <0x40 0x4>;
-			compatible = "fsl,qoriq-core-mux-1.0";
-			clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
-			clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
-			clock-output-names = "cmux2";
-		};
-
-		mux3: mux3 at 60 {
-			#clock-cells = <0>;
-			reg = <0x60 0x4>;
-			compatible = "fsl,qoriq-core-mux-1.0";
-			clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
-			clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
-			clock-output-names = "cmux3";
-		};
 	};
 
 	rcpm: global-utilities at e2000 {
diff --git a/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi
index b048a2b..a32e256 100644
--- a/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi
@@ -81,7 +81,7 @@
 		cpu0: PowerPC,e5500 at 0 {
 			device_type = "cpu";
 			reg = <0>;
-			clocks = <&mux0>;
+			clocks = <&clockgen 1 0>;
 			next-level-cache = <&L2_0>;
 			fsl,portid-mapping = <0x80000000>;
 			L2_0: l2-cache {
@@ -91,7 +91,7 @@
 		cpu1: PowerPC,e5500 at 1 {
 			device_type = "cpu";
 			reg = <1>;
-			clocks = <&mux1>;
+			clocks = <&clockgen 1 1>;
 			next-level-cache = <&L2_1>;
 			fsl,portid-mapping = <0x40000000>;
 			L2_1: l2-cache {
@@ -101,7 +101,7 @@
 		cpu2: PowerPC,e5500 at 2 {
 			device_type = "cpu";
 			reg = <2>;
-			clocks = <&mux2>;
+			clocks = <&clockgen 1 2>;
 			next-level-cache = <&L2_2>;
 			fsl,portid-mapping = <0x20000000>;
 			L2_2: l2-cache {
@@ -111,7 +111,7 @@
 		cpu3: PowerPC,e5500 at 3 {
 			device_type = "cpu";
 			reg = <3>;
-			clocks = <&mux3>;
+			clocks = <&clockgen 1 3>;
 			next-level-cache = <&L2_3>;
 			fsl,portid-mapping = <0x10000000>;
 			L2_3: l2-cache {
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi
index 4ece1ed..463c1ed 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi
@@ -32,54 +32,8 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-global-utilities at e1000 {
+clockgen: global-utilities at e1000 {
 	compatible = "fsl,qoriq-clockgen-1.0";
-	ranges = <0x0 0xe1000 0x1000>;
 	reg = <0xe1000 0x1000>;
-	clock-frequency = <0>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	sysclk: sysclk {
-		#clock-cells = <0>;
-		compatible = "fsl,qoriq-sysclk-1.0", "fixed-clock";
-		clock-output-names = "sysclk";
-	};
-	pll0: pll0 at 800 {
-		#clock-cells = <1>;
-		reg = <0x800 0x4>;
-		compatible = "fsl,qoriq-core-pll-1.0";
-		clocks = <&sysclk>;
-		clock-output-names = "pll0", "pll0-div2";
-	};
-	pll1: pll1 at 820 {
-		#clock-cells = <1>;
-		reg = <0x820 0x4>;
-		compatible = "fsl,qoriq-core-pll-1.0";
-		clocks = <&sysclk>;
-		clock-output-names = "pll1", "pll1-div2";
-	};
-	mux0: mux0 at 0 {
-		#clock-cells = <0>;
-		reg = <0x0 0x4>;
-		compatible = "fsl,qoriq-core-mux-1.0";
-		clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
-		clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
-		clock-output-names = "cmux0";
-	};
-	mux1: mux1 at 20 {
-		#clock-cells = <0>;
-		reg = <0x20 0x4>;
-		compatible = "fsl,qoriq-core-mux-1.0";
-		clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
-		clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
-		clock-output-names = "cmux1";
-	};
-	platform_pll: platform-pll at c00 {
-		#clock-cells = <1>;
-		reg = <0xc00 0x4>;
-		compatible = "fsl,qoriq-platform-pll-1.0";
-		clocks = <&sysclk>;
-		clock-output-names = "platform-pll", "platform-pll-div2";
-	};
+	#clock-cells = <2>;
 };
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi
index 48e0b6e..0361050 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi
@@ -32,37 +32,8 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-global-utilities at e1000 {
+clockgen: global-utilities at e1000 {
 	compatible = "fsl,qoriq-clockgen-2.0";
-	ranges = <0x0 0xe1000 0x1000>;
 	reg = <0xe1000 0x1000>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	sysclk: sysclk {
-		#clock-cells = <0>;
-		compatible = "fsl,qoriq-sysclk-2.0", "fixed-clock";
-		clock-output-names = "sysclk";
-	};
-	pll0: pll0 at 800 {
-		#clock-cells = <1>;
-		reg = <0x800 0x4>;
-		compatible = "fsl,qoriq-core-pll-2.0";
-		clocks = <&sysclk>;
-		clock-output-names = "pll0", "pll0-div2", "pll0-div4";
-	};
-	pll1: pll1 at 820 {
-		#clock-cells = <1>;
-		reg = <0x820 0x4>;
-		compatible = "fsl,qoriq-core-pll-2.0";
-		clocks = <&sysclk>;
-		clock-output-names = "pll1", "pll1-div2", "pll1-div4";
-	};
-	platform_pll: platform-pll at c00 {
-		#clock-cells = <1>;
-		reg = <0xc00 0x4>;
-		compatible = "fsl,qoriq-platform-pll-2.0";
-		clocks = <&sysclk>;
-		clock-output-names = "platform-pll", "platform-pll-div2";
-	};
+	#clock-cells = <2>;
 };
diff --git a/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi
index df1f068..61aea79 100644
--- a/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi
@@ -242,22 +242,6 @@
 /include/ "qoriq-clockgen2.dtsi"
 	global-utilities at e1000 {
 		compatible = "fsl,t1023-clockgen", "fsl,qoriq-clockgen-2.0";
-		mux0: mux0 at 0 {
-			#clock-cells = <0>;
-			reg = <0x0 4>;
-			compatible = "fsl,core-mux-clock";
-			clocks = <&pll0 0>, <&pll0 1>;
-			clock-names = "pll0_0", "pll0_1";
-			clock-output-names = "cmux0";
-		};
-		mux1: mux1 at 20 {
-			#clock-cells = <0>;
-			reg = <0x20 4>;
-			compatible = "fsl,core-mux-clock";
-			clocks = <&pll0 0>, <&pll0 1>;
-			clock-names = "pll0_0", "pll0_1";
-			clock-output-names = "cmux1";
-		};
 	};
 
 	rcpm: global-utilities at e2000 {
diff --git a/arch/powerpc/boot/dts/fsl/t102xsi-pre.dtsi b/arch/powerpc/boot/dts/fsl/t102xsi-pre.dtsi
index 1f1a9f8..cc52fa4 100644
--- a/arch/powerpc/boot/dts/fsl/t102xsi-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t102xsi-pre.dtsi
@@ -68,7 +68,7 @@
 		cpu0: PowerPC,e5500 at 0 {
 			device_type = "cpu";
 			reg = <0>;
-			clocks = <&mux0>;
+			clocks = <&clockgen 1 0>;
 			next-level-cache = <&L2_1>;
 			L2_1: l2-cache {
 				next-level-cache = <&cpc>;
@@ -77,7 +77,7 @@
 		cpu1: PowerPC,e5500 at 1 {
 			device_type = "cpu";
 			reg = <1>;
-			clocks = <&mux1>;
+			clocks = <&clockgen 1 1>;
 			next-level-cache = <&L2_2>;
 			L2_2: l2-cache {
 				next-level-cache = <&cpc>;
diff --git a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
index 9e9f7e2..b738a95 100644
--- a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
@@ -423,50 +423,6 @@
 /include/ "qoriq-clockgen2.dtsi"
 	global-utilities at e1000 {
 		compatible = "fsl,t1040-clockgen", "fsl,qoriq-clockgen-2.0";
-
-		mux0: mux0 at 0 {
-			#clock-cells = <0>;
-			reg = <0x0 4>;
-			compatible = "fsl,qoriq-core-mux-2.0";
-			clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
-				 <&pll1 0>, <&pll1 1>, <&pll1 2>;
-			clock-names = "pll0", "pll0-div2", "pll1-div4",
-				"pll1", "pll1-div2", "pll1-div4";
-			clock-output-names = "cmux0";
-		};
-
-		mux1: mux1 at 20 {
-			#clock-cells = <0>;
-			reg = <0x20 4>;
-			compatible = "fsl,qoriq-core-mux-2.0";
-			clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
-				 <&pll1 0>, <&pll1 1>, <&pll1 2>;
-			clock-names = "pll0", "pll0-div2", "pll1-div4",
-				"pll1", "pll1-div2", "pll1-div4";
-			clock-output-names = "cmux1";
-		};
-
-		mux2: mux2 at 40 {
-			#clock-cells = <0>;
-			reg = <0x40 4>;
-			compatible = "fsl,qoriq-core-mux-2.0";
-			clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
-				 <&pll1 0>, <&pll1 1>, <&pll1 2>;
-			clock-names = "pll0", "pll0-div2", "pll1-div4",
-				"pll1", "pll1-div2", "pll1-div4";
-			clock-output-names = "cmux2";
-		};
-
-		mux3: mux3 at 60 {
-			#clock-cells = <0>;
-			reg = <0x60 4>;
-			compatible = "fsl,qoriq-core-mux-2.0";
-			clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
-				 <&pll1 0>, <&pll1 1>, <&pll1 2>;
-			clock-names = "pll0_0", "pll0_1", "pll0_2",
-				"pll1_0", "pll1_1", "pll1_2";
-			clock-output-names = "cmux3";
-		};
 	};
 
 	rcpm: global-utilities at e2000 {
diff --git a/arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi b/arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi
index bbb7025..74538ae 100644
--- a/arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi
@@ -67,7 +67,7 @@
 		cpu0: PowerPC,e5500 at 0 {
 			device_type = "cpu";
 			reg = <0>;
-			clocks = <&mux0>;
+			clocks = <&clockgen 1 0>;
 			next-level-cache = <&L2_1>;
 			L2_1: l2-cache {
 				next-level-cache = <&cpc>;
@@ -76,7 +76,7 @@
 		cpu1: PowerPC,e5500 at 1 {
 			device_type = "cpu";
 			reg = <1>;
-			clocks = <&mux1>;
+			clocks = <&clockgen 1 1>;
 			next-level-cache = <&L2_2>;
 			L2_2: l2-cache {
 				next-level-cache = <&cpc>;
@@ -85,7 +85,7 @@
 		cpu2: PowerPC,e5500 at 2 {
 			device_type = "cpu";
 			reg = <2>;
-			clocks = <&mux2>;
+			clocks = <&clockgen 1 2>;
 			next-level-cache = <&L2_3>;
 			L2_3: l2-cache {
 				next-level-cache = <&cpc>;
@@ -94,7 +94,7 @@
 		cpu3: PowerPC,e5500 at 3 {
 			device_type = "cpu";
 			reg = <3>;
-			clocks = <&mux3>;
+			clocks = <&clockgen 1 3>;
 			next-level-cache = <&L2_4>;
 			L2_4: l2-cache {
 				next-level-cache = <&cpc>;
diff --git a/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi b/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
index 32c790a..f836bc3 100644
--- a/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
@@ -535,28 +535,6 @@
 /include/ "qoriq-clockgen2.dtsi"
 	global-utilities at e1000 {
 		compatible = "fsl,t2080-clockgen", "fsl,qoriq-clockgen-2.0";
-
-		mux0: mux0 at 0 {
-			#clock-cells = <0>;
-			reg = <0x0 4>;
-			compatible = "fsl,qoriq-core-mux-2.0";
-			clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
-				 <&pll1 0>, <&pll1 1>, <&pll1 2>;
-			clock-names = "pll0", "pll0-div2", "pll0-div4",
-				"pll1", "pll1-div2", "pll1-div4";
-			clock-output-names = "cmux0";
-		};
-
-		mux1: mux1 at 20 {
-			#clock-cells = <0>;
-			reg = <0x20 4>;
-			compatible = "fsl,qoriq-core-mux-2.0";
-			clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
-				 <&pll1 0>, <&pll1 1>, <&pll1 2>;
-			clock-names = "pll0", "pll0-div2", "pll0-div4",
-				"pll1", "pll1-div2", "pll1-div4";
-			clock-output-names = "cmux1";
-		};
 	};
 
 	rcpm: global-utilities at e2000 {
diff --git a/arch/powerpc/boot/dts/fsl/t208xsi-pre.dtsi b/arch/powerpc/boot/dts/fsl/t208xsi-pre.dtsi
index e71ceb0..1b4139f 100644
--- a/arch/powerpc/boot/dts/fsl/t208xsi-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t208xsi-pre.dtsi
@@ -70,28 +70,28 @@
 		cpu0: PowerPC,e6500 at 0 {
 			device_type = "cpu";
 			reg = <0 1>;
-			clocks = <&mux0>;
+			clocks = <&clockgen 1 0>;
 			next-level-cache = <&L2_1>;
 			fsl,portid-mapping = <0x80000000>;
 		};
 		cpu1: PowerPC,e6500 at 2 {
 			device_type = "cpu";
 			reg = <2 3>;
-			clocks = <&mux0>;
+			clocks = <&clockgen 1 0>;
 			next-level-cache = <&L2_1>;
 			fsl,portid-mapping = <0x80000000>;
 		};
 		cpu2: PowerPC,e6500 at 4 {
 			device_type = "cpu";
 			reg = <4 5>;
-			clocks = <&mux0>;
+			clocks = <&clockgen 1 0>;
 			next-level-cache = <&L2_1>;
 			fsl,portid-mapping = <0x80000000>;
 		};
 		cpu3: PowerPC,e6500 at 6 {
 			device_type = "cpu";
 			reg = <6 7>;
-			clocks = <&mux0>;
+			clocks = <&clockgen 1 0>;
 			next-level-cache = <&L2_1>;
 			fsl,portid-mapping = <0x80000000>;
 		};
diff --git a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
index d806360..c6a51ad 100644
--- a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
@@ -950,67 +950,6 @@
 /include/ "qoriq-clockgen2.dtsi"
 	global-utilities at e1000 {
 		compatible = "fsl,t4240-clockgen", "fsl,qoriq-clockgen-2.0";
-
-		pll2: pll2 at 840 {
-			#clock-cells = <1>;
-			reg = <0x840 0x4>;
-			compatible = "fsl,qoriq-core-pll-2.0";
-			clocks = <&sysclk>;
-			clock-output-names = "pll2", "pll2-div2", "pll2-div4";
-		};
-
-		pll3: pll3 at 860 {
-			#clock-cells = <1>;
-			reg = <0x860 0x4>;
-			compatible = "fsl,qoriq-core-pll-2.0";
-			clocks = <&sysclk>;
-			clock-output-names = "pll3", "pll3-div2", "pll3-div4";
-		};
-
-		pll4: pll4 at 880 {
-			#clock-cells = <1>;
-			reg = <0x880 0x4>;
-			compatible = "fsl,qoriq-core-pll-2.0";
-			clocks = <&sysclk>;
-			clock-output-names = "pll4", "pll4-div2", "pll4-div4";
-		};
-
-		mux0: mux0 at 0 {
-			#clock-cells = <0>;
-			reg = <0x0 0x4>;
-			compatible = "fsl,qoriq-core-mux-2.0";
-			clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
-				<&pll1 0>, <&pll1 1>, <&pll1 2>,
-				<&pll2 0>, <&pll2 1>, <&pll2 2>;
-			clock-names = "pll0", "pll0-div2", "pll0-div4",
-				"pll1", "pll1-div2", "pll1-div4",
-				"pll2", "pll2-div2", "pll2-div4";
-			clock-output-names = "cmux0";
-		};
-
-		mux1: mux1 at 20 {
-			#clock-cells = <0>;
-			reg = <0x20 0x4>;
-			compatible = "fsl,qoriq-core-mux-2.0";
-			clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
-				<&pll1 0>, <&pll1 1>, <&pll1 2>,
-				<&pll2 0>, <&pll2 1>, <&pll2 2>;
-			clock-names = "pll0", "pll0-div2", "pll0-div4",
-				"pll1", "pll1-div2", "pll1-div4",
-				"pll2", "pll2-div2", "pll2-div4";
-			clock-output-names = "cmux1";
-		};
-
-		mux2: mux2 at 40 {
-			#clock-cells = <0>;
-			reg = <0x40 0x4>;
-			compatible = "fsl,qoriq-core-mux-2.0";
-			clocks = <&pll3 0>, <&pll3 1>, <&pll3 2>,
-				<&pll4 0>, <&pll4 1>, <&pll4 2>;
-			clock-names = "pll3", "pll3-div2", "pll3-div4",
-				"pll4", "pll4-div2", "pll4-div4";
-			clock-output-names = "cmux2";
-		};
 	};
 
 	rcpm: global-utilities at e2000 {
diff --git a/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi b/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi
index 261a3abb..ae6752d 100644
--- a/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi
@@ -68,84 +68,84 @@
 		cpu0: PowerPC,e6500 at 0 {
 			device_type = "cpu";
 			reg = <0 1>;
-			clocks = <&mux0>;
+			clocks = <&clockgen 1 0>;
 			next-level-cache = <&L2_1>;
 			fsl,portid-mapping = <0x80000000>;
 		};
 		cpu1: PowerPC,e6500 at 2 {
 			device_type = "cpu";
 			reg = <2 3>;
-			clocks = <&mux0>;
+			clocks = <&clockgen 1 0>;
 			next-level-cache = <&L2_1>;
 			fsl,portid-mapping = <0x80000000>;
 		};
 		cpu2: PowerPC,e6500 at 4 {
 			device_type = "cpu";
 			reg = <4 5>;
-			clocks = <&mux0>;
+			clocks = <&clockgen 1 0>;
 			next-level-cache = <&L2_1>;
 			fsl,portid-mapping = <0x80000000>;
 		};
 		cpu3: PowerPC,e6500 at 6 {
 			device_type = "cpu";
 			reg = <6 7>;
-			clocks = <&mux0>;
+			clocks = <&clockgen 1 0>;
 			next-level-cache = <&L2_1>;
 			fsl,portid-mapping = <0x80000000>;
 		};
 		cpu4: PowerPC,e6500 at 8 {
 			device_type = "cpu";
 			reg = <8 9>;
-			clocks = <&mux1>;
+			clocks = <&clockgen 1 1>;
 			next-level-cache = <&L2_2>;
 			fsl,portid-mapping = <0x40000000>;
 		};
 		cpu5: PowerPC,e6500 at 10 {
 			device_type = "cpu";
 			reg = <10 11>;
-			clocks = <&mux1>;
+			clocks = <&clockgen 1 1>;
 			next-level-cache = <&L2_2>;
 			fsl,portid-mapping = <0x40000000>;
 		};
 		cpu6: PowerPC,e6500 at 12 {
 			device_type = "cpu";
 			reg = <12 13>;
-			clocks = <&mux1>;
+			clocks = <&clockgen 1 1>;
 			next-level-cache = <&L2_2>;
 			fsl,portid-mapping = <0x40000000>;
 		};
 		cpu7: PowerPC,e6500 at 14 {
 			device_type = "cpu";
 			reg = <14 15>;
-			clocks = <&mux1>;
+			clocks = <&clockgen 1 1>;
 			next-level-cache = <&L2_2>;
 			fsl,portid-mapping = <0x40000000>;
 		};
 		cpu8: PowerPC,e6500 at 16 {
 			device_type = "cpu";
 			reg = <16 17>;
-			clocks = <&mux2>;
+			clocks = <&clockgen 1 2>;
 			next-level-cache = <&L2_3>;
 			fsl,portid-mapping = <0x20000000>;
 		};
 		cpu9: PowerPC,e6500 at 18 {
 			device_type = "cpu";
 			reg = <18 19>;
-			clocks = <&mux2>;
+			clocks = <&clockgen 1 2>;
 			next-level-cache = <&L2_3>;
 			fsl,portid-mapping = <0x20000000>;
 		};
 		cpu10: PowerPC,e6500 at 20 {
 			device_type = "cpu";
 			reg = <20 21>;
-			clocks = <&mux2>;
+			clocks = <&clockgen 1 2>;
 			next-level-cache = <&L2_3>;
 			fsl,portid-mapping = <0x20000000>;
 		};
 		cpu11: PowerPC,e6500 at 22 {
 			device_type = "cpu";
 			reg = <22 23>;
-			clocks = <&mux2>;
+			clocks = <&clockgen 1 2>;
 			next-level-cache = <&L2_3>;
 			fsl,portid-mapping = <0x20000000>;
 		};
-- 
2.1.4




More information about the linux-arm-kernel mailing list