[RESEND PATCH 2/4] ARM: Kirkwood: add modes-map property to ns2-leds nodes
Simon Guinot
simon.guinot at sequanux.org
Thu Jun 18 08:17:28 PDT 2015
From: Vincent Donnefort <vdonnefort at gmail.com>
Since the LED modes mapping is no longer hardcoded inside the leds-ns2
driver, then it must be provided through the modes-map property in the
ns2-leds nodes.
Signed-off-by: Vincent Donnefort <vdonnefort at gmail.com>
---
arch/arm/boot/dts/kirkwood-d2net.dts | 5 +++++
arch/arm/boot/dts/kirkwood-is2.dts | 5 +++++
arch/arm/boot/dts/kirkwood-ns2.dts | 5 +++++
arch/arm/boot/dts/kirkwood-ns2max.dts | 5 +++++
arch/arm/boot/dts/kirkwood-ns2mini.dts | 5 +++++
5 files changed, 25 insertions(+)
diff --git a/arch/arm/boot/dts/kirkwood-d2net.dts b/arch/arm/boot/dts/kirkwood-d2net.dts
index 6b7856025001..e1c25c35e9ce 100644
--- a/arch/arm/boot/dts/kirkwood-d2net.dts
+++ b/arch/arm/boot/dts/kirkwood-d2net.dts
@@ -10,6 +10,7 @@
/dts-v1/;
+#include <dt-bindings/leds/leds-ns2.h>
#include "kirkwood-netxbig.dtsi"
/ {
@@ -28,6 +29,10 @@
label = "d2net_v2:blue:sata";
slow-gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
cmd-gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+ modes-map = <NS_V2_LED_OFF 1 0
+ NS_V2_LED_ON 0 1
+ NS_V2_LED_ON 1 1
+ NS_V2_LED_SATA 0 0>;
};
};
diff --git a/arch/arm/boot/dts/kirkwood-is2.dts b/arch/arm/boot/dts/kirkwood-is2.dts
index da674bbd49a8..4121674abd1c 100644
--- a/arch/arm/boot/dts/kirkwood-is2.dts
+++ b/arch/arm/boot/dts/kirkwood-is2.dts
@@ -1,5 +1,6 @@
/dts-v1/;
+#include <dt-bindings/leds/leds-ns2.h>
#include "kirkwood-ns2-common.dtsi"
/ {
@@ -27,6 +28,10 @@
label = "ns2:blue:sata";
slow-gpio = <&gpio0 29 0>;
cmd-gpio = <&gpio0 30 0>;
+ modes-map = <NS_V2_LED_OFF 1 0
+ NS_V2_LED_ON 0 1
+ NS_V2_LED_ON 1 1
+ NS_V2_LED_SATA 0 0>;
};
};
};
diff --git a/arch/arm/boot/dts/kirkwood-ns2.dts b/arch/arm/boot/dts/kirkwood-ns2.dts
index 53368d1022cc..190189d235e6 100644
--- a/arch/arm/boot/dts/kirkwood-ns2.dts
+++ b/arch/arm/boot/dts/kirkwood-ns2.dts
@@ -1,5 +1,6 @@
/dts-v1/;
+#include <dt-bindings/leds/leds-ns2.h>
#include "kirkwood-ns2-common.dtsi"
/ {
@@ -27,6 +28,10 @@
label = "ns2:blue:sata";
slow-gpio = <&gpio0 29 0>;
cmd-gpio = <&gpio0 30 0>;
+ modes-map = <NS_V2_LED_OFF 1 0
+ NS_V2_LED_ON 0 1
+ NS_V2_LED_ON 1 1
+ NS_V2_LED_SATA 0 0>;
};
};
};
diff --git a/arch/arm/boot/dts/kirkwood-ns2max.dts b/arch/arm/boot/dts/kirkwood-ns2max.dts
index 72c78d0b1116..55cc41d9c80c 100644
--- a/arch/arm/boot/dts/kirkwood-ns2max.dts
+++ b/arch/arm/boot/dts/kirkwood-ns2max.dts
@@ -1,5 +1,6 @@
/dts-v1/;
+#include <dt-bindings/leds/leds-ns2.h>
#include "kirkwood-ns2-common.dtsi"
/ {
@@ -46,6 +47,10 @@
label = "ns2:blue:sata";
slow-gpio = <&gpio0 29 0>;
cmd-gpio = <&gpio0 30 0>;
+ modes-map = <NS_V2_LED_OFF 1 0
+ NS_V2_LED_ON 0 1
+ NS_V2_LED_ON 1 1
+ NS_V2_LED_SATA 0 0>;
};
};
};
diff --git a/arch/arm/boot/dts/kirkwood-ns2mini.dts b/arch/arm/boot/dts/kirkwood-ns2mini.dts
index c441bf62c09f..9935f3ec29b4 100644
--- a/arch/arm/boot/dts/kirkwood-ns2mini.dts
+++ b/arch/arm/boot/dts/kirkwood-ns2mini.dts
@@ -1,5 +1,6 @@
/dts-v1/;
+#include <dt-bindings/leds/leds-ns2.h>
#include "kirkwood-ns2-common.dtsi"
/ {
@@ -47,6 +48,10 @@
label = "ns2:blue:sata";
slow-gpio = <&gpio0 29 0>;
cmd-gpio = <&gpio0 30 0>;
+ modes-map = <NS_V2_LED_OFF 1 0
+ NS_V2_LED_ON 0 1
+ NS_V2_LED_ON 1 1
+ NS_V2_LED_SATA 0 0>;
};
};
};
--
2.1.4
More information about the linux-arm-kernel
mailing list