[PATCH v2 0/3] Add DT support for netxbig LEDs
Simon Guinot
simon.guinot at sequanux.org
Thu Jun 18 04:52:50 PDT 2015
Hello,
This patch series adds DT support for the LEDs found on the Kirkwood-based
LaCie boards 2Big and 5Big Network v2.
Changes since v1:
- Check timer mode value retrieved from DT.
- In netxbig_leds_get_of_pdata, don't use unsigned long variables to get
timer delay values from DT with function of_property_read_u32_index.
Instead, use a temporary u32 variable. This allows to silence a static
checker warning.
- Make timer property optional in the binding documentation. It is now
aligned with the driver code.
Simon
Simon Guinot (3):
leds: netxbig: add device tree binding
ARM: Kirkwood: add LED DT entries for netxbig boards
ARM: mvebu: remove static LED setup for netxbig boards
.../devicetree/bindings/gpio/netxbig-gpio-ext.txt | 22 ++
.../devicetree/bindings/leds/leds-netxbig.txt | 92 ++++++++
arch/arm/boot/dts/kirkwood-net5big.dts | 60 +++++
arch/arm/boot/dts/kirkwood-netxbig.dtsi | 80 +++++++
arch/arm/mach-mvebu/Kconfig | 7 -
arch/arm/mach-mvebu/Makefile | 1 -
arch/arm/mach-mvebu/board.h | 21 --
arch/arm/mach-mvebu/kirkwood.c | 4 -
arch/arm/mach-mvebu/netxbig.c | 191 ----------------
drivers/leds/leds-netxbig.c | 250 +++++++++++++++++++--
include/dt-bindings/leds/leds-netxbig.h | 18 ++
11 files changed, 501 insertions(+), 245 deletions(-)
create mode 100644 Documentation/devicetree/bindings/gpio/netxbig-gpio-ext.txt
create mode 100644 Documentation/devicetree/bindings/leds/leds-netxbig.txt
delete mode 100644 arch/arm/mach-mvebu/board.h
delete mode 100644 arch/arm/mach-mvebu/netxbig.c
create mode 100644 include/dt-bindings/leds/leds-netxbig.h
--
2.1.4
More information about the linux-arm-kernel
mailing list