[PATCH 31/41] clocksource: atmel-st: Migrate to new 'set-state' interface
Viresh Kumar
viresh.kumar at linaro.org
Thu Jun 18 03:54:45 PDT 2015
Migrate atmel-st driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Nicolas Ferre <nicolas.ferre at atmel.com>
Cc: Alexandre Belloni <alexandre.belloni at free-electrons.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj at jcrosoft.com>
Signed-off-by: Viresh Kumar <viresh.kumar at linaro.org>
---
drivers/clocksource/timer-atmel-st.c | 69 ++++++++++++++++++++++--------------
1 file changed, 42 insertions(+), 27 deletions(-)
diff --git a/drivers/clocksource/timer-atmel-st.c b/drivers/clocksource/timer-atmel-st.c
index 1692e17e096b..41b7b6dc1d0d 100644
--- a/drivers/clocksource/timer-atmel-st.c
+++ b/drivers/clocksource/timer-atmel-st.c
@@ -106,36 +106,47 @@ static struct clocksource clk32k = {
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
-static void
-clkevt32k_mode(enum clock_event_mode mode, struct clock_event_device *dev)
+static void clkdev32k_disable_and_flush_irq(void)
{
unsigned int val;
/* Disable and flush pending timer interrupts */
regmap_write(regmap_st, AT91_ST_IDR, AT91_ST_PITS | AT91_ST_ALMS);
regmap_read(regmap_st, AT91_ST_SR, &val);
-
last_crtr = read_CRTR();
- switch (mode) {
- case CLOCK_EVT_MODE_PERIODIC:
- /* PIT for periodic irqs; fixed rate of 1/HZ */
- irqmask = AT91_ST_PITS;
- regmap_write(regmap_st, AT91_ST_PIMR, RM9200_TIMER_LATCH);
- break;
- case CLOCK_EVT_MODE_ONESHOT:
- /* ALM for oneshot irqs, set by next_event()
- * before 32 seconds have passed
- */
- irqmask = AT91_ST_ALMS;
- regmap_write(regmap_st, AT91_ST_RTAR, last_crtr);
- break;
- case CLOCK_EVT_MODE_SHUTDOWN:
- case CLOCK_EVT_MODE_UNUSED:
- case CLOCK_EVT_MODE_RESUME:
- irqmask = 0;
- break;
- }
+}
+
+static int clkevt32k_shutdown(struct clock_event_device *evt)
+{
+ clkdev32k_disable_and_flush_irq();
+ irqmask = 0;
+ regmap_write(regmap_st, AT91_ST_IER, irqmask);
+ return 0;
+}
+
+static int clkevt32k_set_oneshot(struct clock_event_device *dev)
+{
+ clkdev32k_disable_and_flush_irq();
+
+ /*
+ * ALM for oneshot irqs, set by next_event()
+ * before 32 seconds have passed.
+ */
+ irqmask = AT91_ST_ALMS;
+ regmap_write(regmap_st, AT91_ST_RTAR, last_crtr);
regmap_write(regmap_st, AT91_ST_IER, irqmask);
+ return 0;
+}
+
+static int clkevt32k_set_periodic(struct clock_event_device *dev)
+{
+ clkdev32k_disable_and_flush_irq();
+
+ /* PIT for periodic irqs; fixed rate of 1/HZ */
+ irqmask = AT91_ST_PITS;
+ regmap_write(regmap_st, AT91_ST_PIMR, RM9200_TIMER_LATCH);
+ regmap_write(regmap_st, AT91_ST_IER, irqmask);
+ return 0;
}
static int
@@ -170,11 +181,15 @@ clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev)
}
static struct clock_event_device clkevt = {
- .name = "at91_tick",
- .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
- .rating = 150,
- .set_next_event = clkevt32k_next_event,
- .set_mode = clkevt32k_mode,
+ .name = "at91_tick",
+ .features = CLOCK_EVT_FEAT_PERIODIC |
+ CLOCK_EVT_FEAT_ONESHOT,
+ .rating = 150,
+ .set_next_event = clkevt32k_next_event,
+ .set_state_shutdown = clkevt32k_shutdown,
+ .set_state_periodic = clkevt32k_set_periodic,
+ .set_state_oneshot = clkevt32k_set_oneshot,
+ .tick_resume = clkevt32k_shutdown,
};
/*
--
2.4.0
More information about the linux-arm-kernel
mailing list