[PATCH 2/5] dts: imx53: fix sd card gpio polarity specified in device tree

[Dong Aisheng]

cd-gpios polarity should be changed to GPIO_ACTIVE_LOW and wp-gpios
should be changed to GPIO_ACTIVE_HIGH.
Otherwise, the SD may not work properly due to wrong polarity inversion
specified in DT after switch to common parsing function mmc_of_parse().

Signed-off-by: Dong Aisheng <aisheng.dong at freescale.com>
---
 arch/arm/boot/dts/imx53-ard.dts         | 4 ++--
 arch/arm/boot/dts/imx53-m53evk.dts      | 4 ++--
 arch/arm/boot/dts/imx53-qsb-common.dtsi | 4 ++--
 arch/arm/boot/dts/imx53-smd.dts         | 4 ++--
 arch/arm/boot/dts/imx53-tqma53.dtsi     | 4 ++--
 arch/arm/boot/dts/imx53-tx53.dtsi       | 4 ++--
 arch/arm/boot/dts/imx53-voipac-bsb.dts  | 4 ++--
 7 files changed, 14 insertions(+), 14 deletions(-)

diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts
index e9337ad..3bc1883 100644
--- a/arch/arm/boot/dts/imx53-ard.dts
+++ b/arch/arm/boot/dts/imx53-ard.dts
@@ -103,8 +103,8 @@
 &esdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio1 1 0>;
-	wp-gpios = <&gpio1 9 0>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx53-m53evk.dts b/arch/arm/boot/dts/imx53-m53evk.dts
index d0e0f57..53f4088 100644
--- a/arch/arm/boot/dts/imx53-m53evk.dts
+++ b/arch/arm/boot/dts/imx53-m53evk.dts
@@ -124,8 +124,8 @@
 &esdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio1 1 0>;
-	wp-gpios = <&gpio1 9 0>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi
index 181ae5e..1f55187 100644
--- a/arch/arm/boot/dts/imx53-qsb-common.dtsi
+++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi
@@ -147,8 +147,8 @@
 &esdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc3>;
-	cd-gpios = <&gpio3 11 0>;
-	wp-gpios = <&gpio3 12 0>;
+	cd-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>;
 	bus-width = <8>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts
index 1d32557..fc89ce1 100644
--- a/arch/arm/boot/dts/imx53-smd.dts
+++ b/arch/arm/boot/dts/imx53-smd.dts
@@ -41,8 +41,8 @@
 &esdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio3 13 0>;
-	wp-gpios = <&gpio4 11 0>;
+	cd-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi b/arch/arm/boot/dts/imx53-tqma53.dtsi
index 4f1f0e2..e03373a 100644
--- a/arch/arm/boot/dts/imx53-tqma53.dtsi
+++ b/arch/arm/boot/dts/imx53-tqma53.dtsi
@@ -41,8 +41,8 @@
 	pinctrl-0 = <&pinctrl_esdhc2>,
 		    <&pinctrl_esdhc2_cdwp>;
 	vmmc-supply = <&reg_3p3v>;
-	wp-gpios = <&gpio1 2 0>;
-	cd-gpios = <&gpio1 4 0>;
+	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 	status = "disabled";
 };
 
diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi
index 704bd72..d3e50b2 100644
--- a/arch/arm/boot/dts/imx53-tx53.dtsi
+++ b/arch/arm/boot/dts/imx53-tx53.dtsi
@@ -183,7 +183,7 @@
 };
 
 &esdhc1 {
-	cd-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
 	fsl,wp-controller;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
@@ -191,7 +191,7 @@
 };
 
 &esdhc2 {
-	cd-gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
 	fsl,wp-controller;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc2>;
diff --git a/arch/arm/boot/dts/imx53-voipac-bsb.dts b/arch/arm/boot/dts/imx53-voipac-bsb.dts
index c17d3ad..fc51b87 100644
--- a/arch/arm/boot/dts/imx53-voipac-bsb.dts
+++ b/arch/arm/boot/dts/imx53-voipac-bsb.dts
@@ -119,8 +119,8 @@
 &esdhc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc2>;
-	cd-gpios = <&gpio3 25 0>;
-	wp-gpios = <&gpio2 19 0>;
+	cd-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
-- 
1.9.1