[PATCH v5 02/17] leds: port locomo leds driver to new locomo core

Bryan Wu cooloney at gmail.com
Mon Jun 15 11:43:59 PDT 2015


On Tue, Jun 9, 2015 at 1:08 AM, Dmitry Eremin-Solenikov
<dbaryshkov at gmail.com> wrote:
> 2015-06-09 9:57 GMT+03:00 Lee Jones <lee.jones at linaro.org>:
>> On Mon, 08 Jun 2015, Dmitry Eremin-Solenikov wrote:
>>
>>> Adapt locomo leds driver to new locomo core setup.
>>>
>>> Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov at gmail.com>
>>> Acked-by: Jacek Anaszewski <j.anaszewski at samsung.com>
>>
>> This is missing Bryan's Ack.
>
> Jacek is listed as a co-maintainer of the LEDS subsystem, so I assumed
> that his acked-by is enough.
>
Yeah, Jacke's Acked-by is good enough.

Thanks,
-Bryan

>>
>>> ---
>>>  drivers/leds/Kconfig       |   2 +-
>>>  drivers/leds/leds-locomo.c | 117 +++++++++++++++++++++++----------------------
>>>  2 files changed, 61 insertions(+), 58 deletions(-)
>>>
>>> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
>>> index 966b960..d086aac 100644
>>> --- a/drivers/leds/Kconfig
>>> +++ b/drivers/leds/Kconfig
>>> @@ -79,7 +79,7 @@ config LEDS_LM3642
>>>  config LEDS_LOCOMO
>>>       tristate "LED Support for Locomo device"
>>>       depends on LEDS_CLASS
>>> -     depends on SHARP_LOCOMO
>>> +     depends on MFD_LOCOMO
>>>       help
>>>         This option enables support for the LEDs on Sharp Locomo.
>>>         Zaurus models SL-5500 and SL-5600.
>>> diff --git a/drivers/leds/leds-locomo.c b/drivers/leds/leds-locomo.c
>>> index 80ba048..a4286e9 100644
>>> --- a/drivers/leds/leds-locomo.c
>>> +++ b/drivers/leds/leds-locomo.c
>>> @@ -9,89 +9,92 @@
>>>   */
>>>
>>>  #include <linux/kernel.h>
>>> -#include <linux/init.h>
>>> -#include <linux/module.h>
>>> -#include <linux/device.h>
>>>  #include <linux/leds.h>
>>> +#include <linux/mfd/locomo.h>
>>> +#include <linux/module.h>
>>> +#include <linux/platform_device.h>
>>> +#include <linux/regmap.h>
>>>
>>> -#include <mach/hardware.h>
>>> -#include <asm/hardware/locomo.h>
>>> +struct locomo_led {
>>> +     struct led_classdev led;
>>> +     struct regmap *regmap;
>>> +     unsigned int reg;
>>> +};
>>>
>>>  static void locomoled_brightness_set(struct led_classdev *led_cdev,
>>> -                             enum led_brightness value, int offset)
>>> -{
>>> -     struct locomo_dev *locomo_dev = LOCOMO_DEV(led_cdev->dev->parent);
>>> -     unsigned long flags;
>>> -
>>> -     local_irq_save(flags);
>>> -     if (value)
>>> -             locomo_writel(LOCOMO_LPT_TOFH, locomo_dev->mapbase + offset);
>>> -     else
>>> -             locomo_writel(LOCOMO_LPT_TOFL, locomo_dev->mapbase + offset);
>>> -     local_irq_restore(flags);
>>> -}
>>> -
>>> -static void locomoled_brightness_set0(struct led_classdev *led_cdev,
>>>                               enum led_brightness value)
>>>  {
>>> -     locomoled_brightness_set(led_cdev, value, LOCOMO_LPT0);
>>> +     struct locomo_led *led = container_of(led_cdev, struct locomo_led, led);
>>> +
>>> +     regmap_write(led->regmap, led->reg,
>>> +                     value ? LOCOMO_LPT_TOFH : LOCOMO_LPT_TOFL);
>>>  }
>>>
>>> -static void locomoled_brightness_set1(struct led_classdev *led_cdev,
>>> -                             enum led_brightness value)
>>> +static int locomo_led_register(
>>> +             struct device *dev,
>>> +             struct locomo_led *led,
>>> +             const char *name,
>>> +             const char *trigger,
>>> +             struct regmap *regmap,
>>> +             unsigned int reg)
>>>  {
>>> -     locomoled_brightness_set(led_cdev, value, LOCOMO_LPT1);
>>> +     led->led.name = name;
>>> +     led->led.flags = LED_CORE_SUSPENDRESUME;
>>> +     led->led.default_trigger = trigger;
>>> +     led->led.brightness_set = locomoled_brightness_set;
>>> +     led->regmap = regmap;
>>> +     led->reg = reg;
>>> +
>>> +     return devm_led_classdev_register(dev, &led->led);
>>>  }
>>>
>>> -static struct led_classdev locomo_led0 = {
>>> -     .name                   = "locomo:amber:charge",
>>> -     .default_trigger        = "main-battery-charging",
>>> -     .brightness_set         = locomoled_brightness_set0,
>>> -};
>>> -
>>> -static struct led_classdev locomo_led1 = {
>>> -     .name                   = "locomo:green:mail",
>>> -     .default_trigger        = "nand-disk",
>>> -     .brightness_set         = locomoled_brightness_set1,
>>> -};
>>> -
>>> -static int locomoled_probe(struct locomo_dev *ldev)
>>> +static int locomoled_probe(struct platform_device *pdev)
>>>  {
>>>       int ret;
>>> -
>>> -     ret = led_classdev_register(&ldev->dev, &locomo_led0);
>>> +     struct locomo_led *leds;
>>> +     struct regmap *regmap;
>>> +
>>> +     leds = devm_kzalloc(&pdev->dev, 2 * sizeof(*leds), GFP_KERNEL);
>>> +     if (!leds)
>>> +             return -ENOMEM;
>>> +
>>> +     regmap = dev_get_regmap(pdev->dev.parent, NULL);
>>> +     if (!regmap)
>>> +             return -ENODEV;
>>> +
>>> +     ret = locomo_led_register(
>>> +                     &pdev->dev,
>>> +                     leds,
>>> +                     "locomo:amber:charge",
>>> +                     "main-battery-charging",
>>> +                     regmap,
>>> +                     LOCOMO_LPT0);
>>>       if (ret < 0)
>>>               return ret;
>>>
>>> -     ret = led_classdev_register(&ldev->dev, &locomo_led1);
>>> +     ret = locomo_led_register(
>>> +                     &pdev->dev,
>>> +                     leds + 1,
>>> +                     "locomo:green:mail",
>>> +                     "mmc0",
>>> +                     regmap,
>>> +                     LOCOMO_LPT1);
>>>       if (ret < 0)
>>> -             led_classdev_unregister(&locomo_led0);
>>> -
>>> -     return ret;
>>> -}
>>> +             return ret;
>>>
>>> -static int locomoled_remove(struct locomo_dev *dev)
>>> -{
>>> -     led_classdev_unregister(&locomo_led0);
>>> -     led_classdev_unregister(&locomo_led1);
>>>       return 0;
>>>  }
>>>
>>> -static struct locomo_driver locomoled_driver = {
>>> -     .drv = {
>>> -             .name = "locomoled"
>>> +static struct platform_driver locomoled_driver = {
>>> +     .driver = {
>>> +             .name = "locomo-led"
>>>       },
>>> -     .devid  = LOCOMO_DEVID_LED,
>>>       .probe  = locomoled_probe,
>>> -     .remove = locomoled_remove,
>>>  };
>>>
>>> -static int __init locomoled_init(void)
>>> -{
>>> -     return locomo_driver_register(&locomoled_driver);
>>> -}
>>> -module_init(locomoled_init);
>>> +module_platform_driver(locomoled_driver);
>>>
>>>  MODULE_AUTHOR("John Lenz <lenz at cs.wisc.edu>");
>>>  MODULE_DESCRIPTION("Locomo LED driver");
>>>  MODULE_LICENSE("GPL");
>>> +MODULE_ALIAS("platform:locomo-led");
>>
>> --
>> Lee Jones
>> Linaro STMicroelectronics Landing Team Lead
>> Linaro.org │ Open source software for ARM SoCs
>> Follow Linaro: Facebook | Twitter | Blog
>
>
>
> --
> With best wishes
> Dmitry



More information about the linux-arm-kernel mailing list