[PATCH v2 1/2] ARM: Add cpu_resume_arm() for firmwares that resume in ARM state

[Russell King - ARM Linux]

On Mon, Jun 15, 2015 at 08:33:25AM +0200, Uwe Kleine-König wrote:
> Hello,
> > +	.arm
> > +ENTRY(cpu_resume_arm)
> > + THUMB(	badr	r9, 1f		)	@ Kernel is entered in ARM.
> > + THUMB(	bx	r9		)	@ If this is a Thumb-2 kernel,
> > + THUMB(	.thumb			)	@ switch to Thumb now.
> > + THUMB(1:			)
> >  ENTRY(cpu_resume)
> >  ARM_BE8(setend be)			@ ensure we are in BE mode
> >  #ifdef CONFIG_ARM_VIRT_EXT
> this patch is in next as 51ac91b7f6b11b0da55ac93885ee7b864865bcb1 and
> breaks efm32_defconfig. The exact error message is:
> 
>   AS      arch/arm/kernel/sleep.o
> arch/arm/kernel/sleep.S: Assembler messages:
> arch/arm/kernel/sleep.S:121: Error: selected processor does not support ARM opcodes
> arch/arm/kernel/sleep.S:123: Error: bad instruction `badr r9,1f'
> arch/arm/kernel/sleep.S:124: Error: attempt to use an ARM instruction on a Thumb-only processor -- `bx r9'
> scripts/Makefile.build:294: recipe for target 'arch/arm/kernel/sleep.o' failed
> make[3]: *** [arch/arm/kernel/sleep.o] Error 1

Don't get me wrong, the build testing which goes on is really great, but
there's now a problem with all this.

There needs to be coordination between the people doing the build tests
to ensure that we don't "tire out" those who read the emails with different
groups of people reporting the same problem days after it was first
discovered, and even worse, days after it's been fixed.

The worst thing to do is to report build regressions on Monday for a tree
which was created on Thursday - by the time Monday comes around, projects
such as the 0-day builder have had plenty of time to find them.

Remember, the linux-next tree which is published on Friday (Austrailian
time) is a result of git trees snapshotted around midnight on Thursday.

So, if you're going to build an old linux-next tree, before you report any
problems, please check whether other build systems have already reported
them.  If you've gone to the trouble of tracking down the commit which
caused it, and therefore the likely git tree, check whether a fix has
already been merged.  Or maybe wait until the post-weekend linux-next is
published...

(The problem you're referring to was fixed and pushed out on Friday -
which seems to be a regular thing that happens with problems you've
reported on Mondays...)

-- 
FTTC broadband for 0.8mile line: currently at 10.5Mbps down 400kbps up
according to speedtest.net.