[PATCHv6 2/4] ARM: dts: exynos5422-odroidxu3: Enable TMU at Exynos5422 base
Markus Reichl
m.reichl at fivetechno.de
Mon Jun 15 01:41:11 PDT 2015
Hi Anand, Krzysztof
Am 15.06.2015 um 04:23 schrieb Anand Moon:
> hi Krzysztof
>
> On 15 June 2015 at 05:41, Krzysztof Kozlowski <k.kozlowski at samsung.com> wrote:
>> On 14.06.2015 19:24, Anand Moon wrote:
>>> This changes enables TMU IP block on the Exynos5422 Odroid-XU3
>>> device.
>>>
>>> Signed-off-by: Anand Moon <linux.amoon at gmail.com>
>>> Tested-by: Markus Reichl <m.reichl at fivetechno.de>
>>
>> This does not look right.
>> You put this "Tested-by" since beginning of this patchset (v1) but first
>> it was LDO10. Then you proposed LDO18 and now you use LDO7 from my
>> suggestion. Which of this was tested by Markus because I cannot find his
>> emails with it on LKML?
>
> Markus Reichl tested the earlier version with LDO10.
This is right.
> Commit logs got carry forward by mistake.
>
> -Anand Moon
>
>>
>> Krzysztof
>>
>>> Acked-by: Lukasz Majewski <l.majewski at samsung.com>
>>> ---
>>> Changes rebase on git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung branch for-next
>>> Changes from v5: Use LDO7 regulator instead of LD010.
>>>
>>> The output of LDO18 goes to VDD_EMMC_1V8. This is not regulator for TMU.
>>>
>>> I think the schematics are missing some of details but it can be deducted that:
>>> 1. TEMP SE is supplied by VDD18_TS power domain. It consists of 5
>>> pairs of pins (XTSTEST_OUT[0-4], XTSEXT_RES[0-4]).
>>> 2. The VDD18_TS01, VDD18_TS23 and VDD18_TS4 are wired to the LDO7 of
>>> S2MPS11 PMIC.
>>> 3. I confirmed with the Exynos5422 datasheet that these
>>> VDD18_TS{01,23,4} supply the XTSTEST pins (OUT and RES).
>>>
>>> So the LDO7 it is... but before using it there is a caveat. The LDO7
>>> is also connected to VDD of MIPI, HDMI and few more. So when you use
>>> this regulator in TMU it may be turned off by TMU driver (e.g. during
>>> unbind). In such case these other blocks also should be tested and
>>> checked whether they take this regulator and enable it.
>>> ---
>>> arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 25 ++++++++++++++++++++++
>>> 1 file changed, 25 insertions(+)
>>
>
>
--
Markus Reichl
More information about the linux-arm-kernel
mailing list