[PATCH 1/1] iio:adc: XADC: Set offset explicitly to zero on voltage channels

[Jonathan Cameron]

On 14/06/15 16:45, Lars-Peter Clausen wrote:
> On 06/14/2015 05:15 AM, Gergely Imreh wrote:
>> On 14 June 2015 at 02:30, Jonathan Cameron <jic23 at kernel.org> wrote:
>>> On 11/06/15 09:22, Gergely Imreh wrote:
>>>> The Xilinx XADC driver has both a temperature channel and 8 voltage
>>>> channels. The voltage channels have no offset, but actually were still
>>>> set the same offset as the temperature channel. This did not cause
>>>> problems in /sys/bus/iio/ but can cause problems with other drivers
>>>> using iio data. For example iio-hwmon did return wrong voltage values
>>>> because of the offset.
>>>>
>>>> Change tested with the Parallella board.
>>>>
>>>> Signed-off-by: Gergely Imreh <imrehg at gmail.com>
>>> Well spotted on the bug, but I think we are better off fixing this at the
>>> true source of the problem which is in drivers/iio/inkern.c
>>> iio_convert_raw_to_processed_unlocked which does a call to
>>> iio_channel_read(chan, &offset, NULL, IIO_CHAN_INFO_OFFSET) then uses
>>> the error return to check if the offset parameter is available. It should
>>> be checking that before making this call with a call to iio_channel_has_info.
>>>
>>> I don't suppose you could prepare a patch fixing that as you found the problem?
>>
>> I'll check it out, and send an updated patch! Thanks for the pointers
>> to the core of the issue.
> 
> The issue was already fixed a while ago, see this patch: 
> http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=65de7654d39c70c2b942f801cea01590cf7e3458
>
>  Starting with that commit iio_channel_read() returns an error when
> the attribute is not available, which causes
> iio_convert_raw_to_processed_unlocked() to skip the offset if it is
> not available.
> 
oops.  Good spot. I'd completely forgotten about that and failed to spot
the check when looking at the code yesterday.

Glad you were keeping an eagle eye on things ;)

J
> - Lars