[PATCH v2 1/2] dt-bindings: pwm: add MediaTek display PWM bindings

Thierry Reding thierry.reding at gmail.com
Fri Jun 12 03:23:45 PDT 2015


On Thu, May 21, 2015 at 09:29:23PM +0800, YH Huang wrote:
> Document the device-tree binding of MediatTek display PWM.

s/MediatTek/MediaTek/

> 
> Signed-off-by: YH Huang <yh.huang at mediatek.com>

This could use a more verbose commit message. You could mention what the
PWM is typically used for (display I presume). Perhaps mention how many
channels it exposes and so on.

> ---
>  .../devicetree/bindings/pwm/pwm-mtk-disp.txt       | 25 ++++++++++++++++++++++
>  1 file changed, 25 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pwm/pwm-mtk-disp.txt
> 
> diff --git a/Documentation/devicetree/bindings/pwm/pwm-mtk-disp.txt b/Documentation/devicetree/bindings/pwm/pwm-mtk-disp.txt
> new file mode 100644
> index 0000000..f55bf92
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pwm/pwm-mtk-disp.txt
> @@ -0,0 +1,25 @@
> +MediaTek display PWM controller
> +
> +Required properties:
> + - compatible: should be "mediatek,<name>-disp-pwm"
> +   - "mediatek,mt8173-disp-pwm": found on mt8173 SoC
> +   - "mediatek,mt6595-disp-pwm": found on mt6595 SoC
> + - reg: physical base address and length of the controller's registers
> + - #pwm-cells: must be 2. See pwm.txt in this directory
> +   for a description of the cell format

You can use the full line width of 78/80 characters, no need to wrap
this prematurely.

> + - clocks: phandle and clock specifier of the PWM reference clock
> + - clock-names: must contain the following
> +   - "main": clock used to generate PWM signals
> +   - "mm": sync signals from the modules of mmsys
> +
> +Example:
> +	pwm0: pwm at 1401e000 {
> +		compatible = "mediatek,mt8173-disp-pwm",
> +			     "mediatek,mt6595-disp-pwm";
> +		reg = <0 0x1401e000 0 0x1000>;
> +		#pwm-cells = <2>;
> +		clocks = <&mmsys MM_DISP_PWM026M>,
> +			 <&mmsys MM_DISP_PWM0MM>;
> +		clock-names = "main",
> +			      "mm";

No need to waste a line,

		clock-names = "main", "mm";

fits on a single line just fine.

Thierry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150612/79af9214/attachment-0001.sig>


More information about the linux-arm-kernel mailing list