[PATCH v5 02/17] leds: port locomo leds driver to new locomo core

Jacek Anaszewski j.anaszewski at samsung.com
Tue Jun 9 04:35:54 PDT 2015


On 06/09/2015 01:11 PM, Lee Jones wrote:
> On Tue, 09 Jun 2015, Dmitry Eremin-Solenikov wrote:
>
>> 2015-06-09 9:57 GMT+03:00 Lee Jones <lee.jones at linaro.org>:
>>> On Mon, 08 Jun 2015, Dmitry Eremin-Solenikov wrote:
>>>
>>>> Adapt locomo leds driver to new locomo core setup.
>>>>
>>>> Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov at gmail.com>
>>>> Acked-by: Jacek Anaszewski <j.anaszewski at samsung.com>
>>>
>>> This is missing Bryan's Ack.
>>
>> Jacek is listed as a co-maintainer of the LEDS subsystem, so I assumed
>> that his acked-by is enough.
>
> Ah, this is new.
>
> Congratulations Jacek.

Thanks.

> Ignore me then.

I think that it should go via mfd tree, as this patch adds
dependency on header linux/mfd/locomo.h, which is added
in one of the preceding patches [1] in this series.

[1] [PATCH v3 01/17] mfd: add new driver for Sharp LoCoMo

>>>> ---
>>>>   drivers/leds/Kconfig       |   2 +-
>>>>   drivers/leds/leds-locomo.c | 117 +++++++++++++++++++++++----------------------
>>>>   2 files changed, 61 insertions(+), 58 deletions(-)
>>>>
>>>> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
>>>> index 966b960..d086aac 100644
>>>> --- a/drivers/leds/Kconfig
>>>> +++ b/drivers/leds/Kconfig
>>>> @@ -79,7 +79,7 @@ config LEDS_LM3642
>>>>   config LEDS_LOCOMO
>>>>        tristate "LED Support for Locomo device"
>>>>        depends on LEDS_CLASS
>>>> -     depends on SHARP_LOCOMO
>>>> +     depends on MFD_LOCOMO
>>>>        help
>>>>          This option enables support for the LEDs on Sharp Locomo.
>>>>          Zaurus models SL-5500 and SL-5600.
>>>> diff --git a/drivers/leds/leds-locomo.c b/drivers/leds/leds-locomo.c
>>>> index 80ba048..a4286e9 100644
>>>> --- a/drivers/leds/leds-locomo.c
>>>> +++ b/drivers/leds/leds-locomo.c
>>>> @@ -9,89 +9,92 @@
>>>>    */
>>>>
>>>>   #include <linux/kernel.h>
>>>> -#include <linux/init.h>
>>>> -#include <linux/module.h>
>>>> -#include <linux/device.h>
>>>>   #include <linux/leds.h>
>>>> +#include <linux/mfd/locomo.h>
>>>> +#include <linux/module.h>
>>>> +#include <linux/platform_device.h>
>>>> +#include <linux/regmap.h>
>>>>
>>>> -#include <mach/hardware.h>
>>>> -#include <asm/hardware/locomo.h>
>>>> +struct locomo_led {
>>>> +     struct led_classdev led;
>>>> +     struct regmap *regmap;
>>>> +     unsigned int reg;
>>>> +};
>>>>
>>>>   static void locomoled_brightness_set(struct led_classdev *led_cdev,
>>>> -                             enum led_brightness value, int offset)
>>>> -{
>>>> -     struct locomo_dev *locomo_dev = LOCOMO_DEV(led_cdev->dev->parent);
>>>> -     unsigned long flags;
>>>> -
>>>> -     local_irq_save(flags);
>>>> -     if (value)
>>>> -             locomo_writel(LOCOMO_LPT_TOFH, locomo_dev->mapbase + offset);
>>>> -     else
>>>> -             locomo_writel(LOCOMO_LPT_TOFL, locomo_dev->mapbase + offset);
>>>> -     local_irq_restore(flags);
>>>> -}
>>>> -
>>>> -static void locomoled_brightness_set0(struct led_classdev *led_cdev,
>>>>                                enum led_brightness value)
>>>>   {
>>>> -     locomoled_brightness_set(led_cdev, value, LOCOMO_LPT0);
>>>> +     struct locomo_led *led = container_of(led_cdev, struct locomo_led, led);
>>>> +
>>>> +     regmap_write(led->regmap, led->reg,
>>>> +                     value ? LOCOMO_LPT_TOFH : LOCOMO_LPT_TOFL);
>>>>   }
>>>>
>>>> -static void locomoled_brightness_set1(struct led_classdev *led_cdev,
>>>> -                             enum led_brightness value)
>>>> +static int locomo_led_register(
>>>> +             struct device *dev,
>>>> +             struct locomo_led *led,
>>>> +             const char *name,
>>>> +             const char *trigger,
>>>> +             struct regmap *regmap,
>>>> +             unsigned int reg)
>>>>   {
>>>> -     locomoled_brightness_set(led_cdev, value, LOCOMO_LPT1);
>>>> +     led->led.name = name;
>>>> +     led->led.flags = LED_CORE_SUSPENDRESUME;
>>>> +     led->led.default_trigger = trigger;
>>>> +     led->led.brightness_set = locomoled_brightness_set;
>>>> +     led->regmap = regmap;
>>>> +     led->reg = reg;
>>>> +
>>>> +     return devm_led_classdev_register(dev, &led->led);
>>>>   }
>>>>
>>>> -static struct led_classdev locomo_led0 = {
>>>> -     .name                   = "locomo:amber:charge",
>>>> -     .default_trigger        = "main-battery-charging",
>>>> -     .brightness_set         = locomoled_brightness_set0,
>>>> -};
>>>> -
>>>> -static struct led_classdev locomo_led1 = {
>>>> -     .name                   = "locomo:green:mail",
>>>> -     .default_trigger        = "nand-disk",
>>>> -     .brightness_set         = locomoled_brightness_set1,
>>>> -};
>>>> -
>>>> -static int locomoled_probe(struct locomo_dev *ldev)
>>>> +static int locomoled_probe(struct platform_device *pdev)
>>>>   {
>>>>        int ret;
>>>> -
>>>> -     ret = led_classdev_register(&ldev->dev, &locomo_led0);
>>>> +     struct locomo_led *leds;
>>>> +     struct regmap *regmap;
>>>> +
>>>> +     leds = devm_kzalloc(&pdev->dev, 2 * sizeof(*leds), GFP_KERNEL);
>>>> +     if (!leds)
>>>> +             return -ENOMEM;
>>>> +
>>>> +     regmap = dev_get_regmap(pdev->dev.parent, NULL);
>>>> +     if (!regmap)
>>>> +             return -ENODEV;
>>>> +
>>>> +     ret = locomo_led_register(
>>>> +                     &pdev->dev,
>>>> +                     leds,
>>>> +                     "locomo:amber:charge",
>>>> +                     "main-battery-charging",
>>>> +                     regmap,
>>>> +                     LOCOMO_LPT0);
>>>>        if (ret < 0)
>>>>                return ret;
>>>>
>>>> -     ret = led_classdev_register(&ldev->dev, &locomo_led1);
>>>> +     ret = locomo_led_register(
>>>> +                     &pdev->dev,
>>>> +                     leds + 1,
>>>> +                     "locomo:green:mail",
>>>> +                     "mmc0",
>>>> +                     regmap,
>>>> +                     LOCOMO_LPT1);
>>>>        if (ret < 0)
>>>> -             led_classdev_unregister(&locomo_led0);
>>>> -
>>>> -     return ret;
>>>> -}
>>>> +             return ret;
>>>>
>>>> -static int locomoled_remove(struct locomo_dev *dev)
>>>> -{
>>>> -     led_classdev_unregister(&locomo_led0);
>>>> -     led_classdev_unregister(&locomo_led1);
>>>>        return 0;
>>>>   }
>>>>
>>>> -static struct locomo_driver locomoled_driver = {
>>>> -     .drv = {
>>>> -             .name = "locomoled"
>>>> +static struct platform_driver locomoled_driver = {
>>>> +     .driver = {
>>>> +             .name = "locomo-led"
>>>>        },
>>>> -     .devid  = LOCOMO_DEVID_LED,
>>>>        .probe  = locomoled_probe,
>>>> -     .remove = locomoled_remove,
>>>>   };
>>>>
>>>> -static int __init locomoled_init(void)
>>>> -{
>>>> -     return locomo_driver_register(&locomoled_driver);
>>>> -}
>>>> -module_init(locomoled_init);
>>>> +module_platform_driver(locomoled_driver);
>>>>
>>>>   MODULE_AUTHOR("John Lenz <lenz at cs.wisc.edu>");
>>>>   MODULE_DESCRIPTION("Locomo LED driver");
>>>>   MODULE_LICENSE("GPL");
>>>> +MODULE_ALIAS("platform:locomo-led");
>>>
>>
>>
>>
>


-- 
Best Regards,
Jacek Anaszewski



More information about the linux-arm-kernel mailing list