[PATCH v5 10/17] i2c: add locomo i2c driver
Dmitry Eremin-Solenikov
dbaryshkov at gmail.com
Mon Jun 8 13:56:41 PDT 2015
LoCoMo chip contains a tiny i2c controller destined to control
M62332 DAC. Provide a separate I2C driver for this cell.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov at gmail.com>
Reviewed-by: Wolfram Sang <wsa at the-dreams.de>
---
drivers/i2c/busses/Kconfig | 12 ++++
drivers/i2c/busses/Makefile | 1 +
drivers/i2c/busses/i2c-locomo.c | 135 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 148 insertions(+)
create mode 100644 drivers/i2c/busses/i2c-locomo.c
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 2255af2..114d9da 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -602,6 +602,18 @@ config I2C_KEMPLD
This driver can also be built as a module. If so, the module
will be called i2c-kempld.
+config I2C_LOCOMO
+ tristate "I2C bus support for LoCoMo chips"
+ depends on MFD_LOCOMO
+ select I2C_ALGOBIT
+ help
+ Say yes if you will run the kernel on Sharp SL-5x00 family of devices.
+
+ If you don't know what to do here, say N.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-locomo.
+
config I2C_MESON
tristate "Amlogic Meson I2C controller"
depends on ARCH_MESON
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index cdf941d..e09dcf6 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -58,6 +58,7 @@ obj-$(CONFIG_I2C_IMX) += i2c-imx.o
obj-$(CONFIG_I2C_IOP3XX) += i2c-iop3xx.o
obj-$(CONFIG_I2C_JZ4780) += i2c-jz4780.o
obj-$(CONFIG_I2C_KEMPLD) += i2c-kempld.o
+obj-$(CONFIG_I2C_LOCOMO) += i2c-locomo.o
obj-$(CONFIG_I2C_MESON) += i2c-meson.o
obj-$(CONFIG_I2C_MPC) += i2c-mpc.o
obj-$(CONFIG_I2C_MV64XXX) += i2c-mv64xxx.o
diff --git a/drivers/i2c/busses/i2c-locomo.c b/drivers/i2c/busses/i2c-locomo.c
new file mode 100644
index 0000000..d520513
--- /dev/null
+++ b/drivers/i2c/busses/i2c-locomo.c
@@ -0,0 +1,135 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include <linux/kernel.h>
+#include <linux/mfd/locomo.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+struct locomo_i2c {
+ struct regmap *regmap;
+ struct i2c_adapter adap;
+ struct i2c_algo_bit_data bit;
+};
+
+static void locomo_i2c_setsda(void *data, int state)
+{
+ struct locomo_i2c *li2c = data;
+
+ regmap_update_bits(li2c->regmap, LOCOMO_DAC,
+ LOCOMO_DAC_SDAOEB,
+ state ? LOCOMO_DAC_SDAOEB : 0);
+}
+
+static void locomo_i2c_setscl(void *data, int state)
+{
+ struct locomo_i2c *li2c = data;
+
+ regmap_update_bits(li2c->regmap, LOCOMO_DAC,
+ LOCOMO_DAC_SCLOEB,
+ state ? LOCOMO_DAC_SCLOEB : 0);
+}
+
+static int locomo_i2c_getsda(void *data)
+{
+ struct locomo_i2c *li2c = data;
+ unsigned int r;
+
+ regmap_read(li2c->regmap, LOCOMO_DAC, &r);
+
+ return !!(r & LOCOMO_DAC_SDA);
+}
+
+static int locomo_i2c_probe(struct platform_device *dev)
+{
+ struct locomo_i2c *li2c;
+ int ret;
+
+ li2c = devm_kzalloc(&dev->dev, sizeof(struct locomo_i2c), GFP_KERNEL);
+ if (li2c == NULL)
+ return -ENOMEM;
+
+ li2c->regmap = dev_get_regmap(dev->dev.parent, NULL);
+ if (!li2c->regmap)
+ return -ENODEV;
+
+ li2c->adap.owner = THIS_MODULE;
+ li2c->adap.dev.parent = &dev->dev;
+ li2c->adap.dev.of_node = dev->dev.of_node;
+ li2c->adap.algo_data = &li2c->bit;
+ li2c->adap.nr = 1; /* On poodle, 0 is pxa internal bus */
+
+ strlcpy(li2c->adap.name, "LoCoMo I2C", sizeof(li2c->adap.name));
+
+ li2c->bit.data = li2c;
+ li2c->bit.setsda = locomo_i2c_setsda;
+ li2c->bit.setscl = locomo_i2c_setscl;
+ li2c->bit.getsda = locomo_i2c_getsda;
+ li2c->bit.udelay = 6;
+ li2c->bit.timeout = HZ;
+
+ ret = i2c_bit_add_numbered_bus(&li2c->adap);
+ if (ret)
+ return ret;
+
+ platform_set_drvdata(dev, li2c);
+
+ return 0;
+}
+
+static int locomo_i2c_remove(struct platform_device *dev)
+{
+ struct locomo_i2c *li2c = platform_get_drvdata(dev);
+
+ i2c_del_adapter(&li2c->adap);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int locomo_i2c_suspend(struct device *dev)
+{
+ struct locomo_i2c *li2c = dev_get_drvdata(dev);
+
+ regmap_write(li2c->regmap, LOCOMO_DAC, 0x00);
+
+ return 0;
+}
+
+static int locomo_i2c_resume(struct device *dev)
+{
+ struct locomo_i2c *li2c = dev_get_drvdata(dev);
+
+ regmap_write(li2c->regmap, LOCOMO_DAC,
+ LOCOMO_DAC_SDAOEB | LOCOMO_DAC_SCLOEB);
+
+ return 0;
+}
+static SIMPLE_DEV_PM_OPS(locomo_i2c_pm, locomo_i2c_suspend, locomo_i2c_resume);
+#define LOCOMO_I2C_PM (&locomo_i2c_pm)
+#else
+#define LOCOMO_I2C_PM NULL
+#endif
+
+
+static struct platform_driver locomo_i2c_driver = {
+ .driver = {
+ .name = "locomo-i2c",
+ .pm = LOCOMO_I2C_PM,
+ },
+ .probe = locomo_i2c_probe,
+ .remove = locomo_i2c_remove,
+};
+
+module_platform_driver(locomo_i2c_driver);
+
+MODULE_DESCRIPTION("LoCoMo i2c bus driver");
+MODULE_AUTHOR("Dmitry Eremin-Solenikov <dbaryshkov at gmail.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:locomo-i2c");
--
2.1.4
More information about the linux-arm-kernel
mailing list