[PATCH v5 01/17] mfd: add new driver for Sharp LoCoMo
Dmitry Eremin-Solenikov
dbaryshkov at gmail.com
Mon Jun 8 13:56:32 PDT 2015
LoCoMo is a GA used on Sharp Zaurus SL-5x00. Current driver does has
several design issues (special bus instead of platform bus, doesn't use
mfd-core, etc).
Implement 'core' parts of locomo support as an mfd driver.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov at gmail.com>
Acked-by: Lee Jones <lee.jones at linaro.org>
---
drivers/mfd/Kconfig | 10 ++
drivers/mfd/Makefile | 1 +
drivers/mfd/locomo.c | 336 +++++++++++++++++++++++++++++++++++++++++++++
include/linux/mfd/locomo.h | 169 +++++++++++++++++++++++
4 files changed, 516 insertions(+)
create mode 100644 drivers/mfd/locomo.c
create mode 100644 include/linux/mfd/locomo.h
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index d5ad04d..8c33940 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1430,6 +1430,16 @@ config MFD_STW481X
in various ST Microelectronics and ST-Ericsson embedded
Nomadik series.
+config MFD_LOCOMO
+ bool "Sharp LoCoMo support"
+ depends on ARM
+ select MFD_CORE
+ select IRQ_DOMAIN
+ select REGMAP_MMIO
+ help
+ Support for Sharp LoCoMo Grid Array found in Sharp SL-5x00
+ PDA family.
+
menu "Multimedia Capabilities Port drivers"
depends on ARCH_SA1100
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 0e5cfeb..6c23b73 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -181,6 +181,7 @@ obj-$(CONFIG_MFD_HI6421_PMIC) += hi6421-pmic-core.o
obj-$(CONFIG_MFD_DLN2) += dln2.o
obj-$(CONFIG_MFD_RT5033) += rt5033.o
obj-$(CONFIG_MFD_SKY81452) += sky81452.o
+obj-$(CONFIG_MFD_LOCOMO) += locomo.o
intel-soc-pmic-objs := intel_soc_pmic_core.o intel_soc_pmic_crc.o
obj-$(CONFIG_INTEL_SOC_PMIC) += intel-soc-pmic.o
diff --git a/drivers/mfd/locomo.c b/drivers/mfd/locomo.c
new file mode 100644
index 0000000..4682893
--- /dev/null
+++ b/drivers/mfd/locomo.c
@@ -0,0 +1,336 @@
+/*
+ * Sharp LoCoMo support
+ *
+ * (C) Copyright 2015 Dmitry Eremin-Solenikov
+ *
+ * Based on old driver at arch/arm/common/locomo.c
+ *
+ * (C) Copyright 2004 John Lenz
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This file contains all generic LoCoMo support.
+ *
+ * All initialization functions provided here are intended to be called
+ * from machine specific code with proper arguments when required.
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/kernel.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/locomo.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+/* LoCoMo Interrupts */
+#define IRQ_LOCOMO_KEY 0
+#define IRQ_LOCOMO_GPIO 1
+#define IRQ_LOCOMO_LT 2
+#define IRQ_LOCOMO_SPI 3
+
+#define LOCOMO_NR_IRQS 4
+
+/* The following is the overall data for the locomo chip */
+struct locomo {
+ struct device *dev;
+ unsigned int irq;
+ spinlock_t lock;
+ struct irq_domain *domain;
+ struct regmap *regmap;
+};
+
+static struct resource locomo_kbd_resources[] = {
+ DEFINE_RES_IRQ(IRQ_LOCOMO_KEY),
+};
+
+static struct resource locomo_gpio_resources[] = {
+ DEFINE_RES_IRQ(IRQ_LOCOMO_GPIO),
+};
+
+/* Filled in locomo_probe() function, will be kmemduped by platform core */
+static struct locomo_gpio_platform_data locomo_gpio_pdata;
+
+static struct resource locomo_lt_resources[] = {
+ DEFINE_RES_IRQ(IRQ_LOCOMO_LT),
+};
+
+static struct resource locomo_spi_resources[] = {
+ DEFINE_RES_IRQ(IRQ_LOCOMO_SPI),
+};
+
+/* Filled in locomo_probe() function, will be kmemduped by platform core */
+static struct locomo_lcd_platform_data locomo_lcd_pdata;
+
+static struct mfd_cell locomo_cells[] = {
+ {
+ .name = "locomo-kbd",
+ .resources = locomo_kbd_resources,
+ .num_resources = ARRAY_SIZE(locomo_kbd_resources),
+ },
+ {
+ .name = "locomo-gpio",
+ .resources = locomo_gpio_resources,
+ .num_resources = ARRAY_SIZE(locomo_gpio_resources),
+ .platform_data = &locomo_gpio_pdata,
+ .pdata_size = sizeof(locomo_gpio_pdata),
+ },
+ {
+ .name = "locomo-lt", /* Long time timer */
+ .resources = locomo_lt_resources,
+ .num_resources = ARRAY_SIZE(locomo_lt_resources),
+ },
+ {
+ .name = "locomo-spi",
+ .resources = locomo_spi_resources,
+ .num_resources = ARRAY_SIZE(locomo_spi_resources),
+ },
+ {
+ .name = "locomo-lcd",
+ .platform_data = &locomo_lcd_pdata,
+ .pdata_size = sizeof(locomo_lcd_pdata),
+ },
+ { .name = "locomo-led", },
+ { .name = "locomo-backlight", },
+ { .name = "locomo-i2c", },
+};
+
+/*
+ * IRQ support
+ */
+static void locomo_handler(unsigned int irq, struct irq_desc *desc)
+{
+ struct locomo *ldev = irq_get_handler_data(irq);
+ struct irq_chip *irqchip = irq_desc_get_chip(desc);
+ unsigned int req;
+
+ chained_irq_enter(irqchip, desc);
+
+ /* Check why this interrupt was generated */
+ while (1) {
+ regmap_read(ldev->regmap, LOCOMO_ICR, &req);
+ req >>= LOCOMO_ICR_STATUS_SHIFT;
+
+ if (!req)
+ break;
+
+ irq = ffs(req) - 1;
+ generic_handle_irq(irq_find_mapping(ldev->domain, irq));
+ }
+
+ chained_irq_exit(irqchip, desc);
+}
+
+static void locomo_mask_irq(struct irq_data *d)
+{
+ struct locomo *ldev = irq_data_get_irq_chip_data(d);
+ unsigned int mask = BIT(d->hwirq + LOCOMO_ICR_MASK_SHIFT);
+
+ regmap_update_bits(ldev->regmap, LOCOMO_ICR, mask, 0);
+}
+
+static void locomo_unmask_irq(struct irq_data *d)
+{
+ struct locomo *ldev = irq_data_get_irq_chip_data(d);
+ unsigned int mask = BIT(d->hwirq + LOCOMO_ICR_MASK_SHIFT);
+
+ regmap_update_bits(ldev->regmap, LOCOMO_ICR, mask, mask);
+}
+
+static struct irq_chip locomo_chip = {
+ .name = "locomo",
+ .irq_mask = locomo_mask_irq,
+ .irq_unmask = locomo_unmask_irq,
+};
+
+static int locomo_irq_map(struct irq_domain *d, unsigned int virq,
+ irq_hw_number_t hwirq)
+{
+ struct locomo *locomo = d->host_data;
+
+ irq_set_chip_data(virq, locomo);
+ irq_set_chip_and_handler(virq, &locomo_chip, handle_level_irq);
+ set_irq_flags(virq, IRQF_VALID);
+
+ return 0;
+}
+
+static void locomo_irq_unmap(struct irq_domain *d, unsigned int virq)
+{
+ set_irq_flags(virq, 0);
+ irq_set_chip_and_handler(virq, NULL, NULL);
+ irq_set_chip_data(virq, NULL);
+}
+
+static struct irq_domain_ops locomo_irq_ops = {
+ .map = locomo_irq_map,
+ .unmap = locomo_irq_unmap,
+ .xlate = irq_domain_xlate_onecell,
+};
+
+static int locomo_setup_irq(struct locomo *ldev)
+{
+ ldev->domain = irq_domain_add_simple(NULL, LOCOMO_NR_IRQS, 0,
+ &locomo_irq_ops, ldev);
+ if (!ldev->domain)
+ return -ENOMEM;
+
+ /*
+ * Install handler for IRQ_LOCOMO_HW.
+ */
+ irq_set_irq_type(ldev->irq, IRQ_TYPE_EDGE_FALLING);
+ irq_set_handler_data(ldev->irq, ldev);
+ irq_set_chained_handler(ldev->irq, locomo_handler);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int locomo_suspend(struct device *dev)
+{
+ struct locomo *ldev = dev_get_drvdata(dev);
+
+ /* Audio */
+ regmap_write(ldev->regmap, LOCOMO_PAIF, 0x00);
+
+ /*
+ * Original code disabled the clock depending on leds settings
+ * However we disable leds before suspend, thus it's safe
+ * to just assume this setting.
+ */
+ /* CLK32 off */
+ regmap_write(ldev->regmap, LOCOMO_C32K, 0x00);
+
+ /* 22MHz/24MHz clock off */
+ regmap_write(ldev->regmap, LOCOMO_ACC, 0x00);
+
+ return 0;
+}
+
+static int locomo_resume(struct device *dev)
+{
+ struct locomo *ldev = dev_get_drvdata(dev);
+
+ regmap_write(ldev->regmap, LOCOMO_C32K, 0x00);
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(locomo_pm, locomo_suspend, locomo_resume);
+
+static const struct regmap_config locomo_regmap_config = {
+ .name = "LoCoMo",
+ .reg_bits = 8,
+ .reg_stride = 4,
+ .val_bits = 16,
+ .cache_type = REGCACHE_NONE,
+ .max_register = 0xec,
+};
+
+static int locomo_probe(struct platform_device *pdev)
+{
+ struct locomo_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ struct resource *res;
+ void __iomem *base;
+ struct locomo *ldev;
+ unsigned int rev;
+ int ret;
+
+ ldev = devm_kzalloc(&pdev->dev, sizeof(*ldev), GFP_KERNEL);
+ if (!ldev)
+ return -ENOMEM;
+
+ spin_lock_init(&ldev->lock);
+ ldev->dev = &pdev->dev;
+
+ ldev->irq = platform_get_irq(pdev, 0);
+ if (ldev->irq < 0)
+ return ldev->irq;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ ldev->regmap = devm_regmap_init_mmio(&pdev->dev, base,
+ &locomo_regmap_config);
+ if (IS_ERR(ldev->regmap))
+ return PTR_ERR(ldev->regmap);
+
+ if (pdata) {
+ locomo_gpio_pdata.gpio_base = pdata->gpio_base;
+ locomo_lcd_pdata.comadj = pdata->comadj;
+ } else {
+ locomo_gpio_pdata.gpio_base = -1;
+ locomo_lcd_pdata.comadj = 128;
+ }
+
+ platform_set_drvdata(pdev, ldev);
+
+ regmap_read(ldev->regmap, LOCOMO_VER, &rev);
+ dev_info(&pdev->dev, "LoCoMo Chip: %04x\n", rev);
+
+ /* Clear IRQ status and mask */
+ regmap_write(ldev->regmap, LOCOMO_ICR, 0);
+
+ /* Longtime timer */
+ regmap_write(ldev->regmap, LOCOMO_LTINT, 0);
+
+ ret = locomo_setup_irq(ldev);
+ if (ret)
+ return ret;
+
+ ret = mfd_add_devices(&pdev->dev, pdev->id,
+ locomo_cells, ARRAY_SIZE(locomo_cells),
+ res, -1, ldev->domain);
+ if (ret)
+ goto err;
+
+ return 0;
+
+err:
+ irq_set_chained_handler(ldev->irq, NULL);
+ irq_set_handler_data(ldev->irq, NULL);
+
+ irq_domain_remove(ldev->domain);
+
+ return ret;
+}
+
+static int locomo_remove(struct platform_device *dev)
+{
+ struct locomo *ldev = platform_get_drvdata(dev);
+
+ mfd_remove_devices(&dev->dev);
+
+ irq_set_chained_handler(ldev->irq, NULL);
+ irq_set_handler_data(ldev->irq, NULL);
+
+ irq_domain_remove(ldev->domain);
+
+ return 0;
+}
+
+static struct platform_driver locomo_device_driver = {
+ .probe = locomo_probe,
+ .remove = locomo_remove,
+ .driver = {
+ .name = "locomo",
+ .pm = &locomo_pm,
+ },
+};
+
+module_platform_driver(locomo_device_driver);
+
+MODULE_DESCRIPTION("Sharp LoCoMo core driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("John Lenz <lenz at cs.wisc.edu>");
+MODULE_ALIAS("platform:locomo");
diff --git a/include/linux/mfd/locomo.h b/include/linux/mfd/locomo.h
new file mode 100644
index 0000000..999e3de
--- /dev/null
+++ b/include/linux/mfd/locomo.h
@@ -0,0 +1,169 @@
+/*
+ * This file contains the definitions for the LoCoMo G/A Chip
+ *
+ * (C) Copyright 2015 Dmitry Eremin-Solenikov
+ * (C) Copyright 2004 John Lenz
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License. See linux/COPYING for more information.
+ *
+ * Based on sa1111.h
+ */
+
+#ifndef _ASM_ARCH_LOCOMO
+#define _ASM_ARCH_LOCOMO
+
+/* LOCOMO chip version */
+#define LOCOMO_VER 0x00
+
+/* Pin status */
+#define LOCOMO_ST 0x04
+
+/* Pin status */
+#define LOCOMO_C32K 0x08
+
+/* Interrupt controller */
+#define LOCOMO_ICR 0x0c
+#define LOCOMO_ICR_MASK_SHIFT 4
+#define LOCOMO_ICR_STATUS_SHIFT 8
+
+/* Touch panel controller */
+#define LOCOMO_ASD 0x20 /* AD start delay */
+#define LOCOMO_HSD 0x28 /* HSYS delay */
+#define LOCOMO_HSC 0x2c /* HSYS period */
+#define LOCOMO_TADC 0x30 /* tablet ADC clock */
+
+/* Backlight controller: TFT signal */
+#define LOCOMO_TC 0x38 /* TFT control signal */
+#define LOCOMO_CPSD 0x3c /* CPS delay */
+
+/* Keyboard controller */
+#define LOCOMO_KIB 0x40 /* KIB level */
+#define LOCOMO_KSC 0x44 /* KSTRB control */
+#define LOCOMO_KCMD 0x48 /* KSTRB command */
+#define LOCOMO_KIC 0x4c /* Key interrupt */
+
+/* Audio clock */
+#define LOCOMO_ACC 0x54 /* Audio clock */
+#define LOCOMO_ACC_XON 0x80
+#define LOCOMO_ACC_XEN 0x40
+#define LOCOMO_ACC_XSEL0 0x00
+#define LOCOMO_ACC_XSEL1 0x20
+#define LOCOMO_ACC_MCLKEN 0x10
+#define LOCOMO_ACC_64FSEN 0x08
+#define LOCOMO_ACC_CLKSEL000 0x00 /* mclk 2 */
+#define LOCOMO_ACC_CLKSEL001 0x01 /* mclk 3 */
+#define LOCOMO_ACC_CLKSEL010 0x02 /* mclk 4 */
+#define LOCOMO_ACC_CLKSEL011 0x03 /* mclk 6 */
+#define LOCOMO_ACC_CLKSEL100 0x04 /* mclk 8 */
+#define LOCOMO_ACC_CLKSEL101 0x05 /* mclk 12 */
+
+/* SPI interface */
+#define LOCOMO_SPIMD 0x60 /* SPI mode setting */
+#define LOCOMO_SPIMD_LOOPBACK BIT(15) /* loopback tx to rx */
+#define LOCOMO_SPIMD_MSB1ST BIT(14) /* send MSB first */
+#define LOCOMO_SPIMD_DOSTAT BIT(13) /* transmit line is idle high */
+#define LOCOMO_SPIMD_TCPOL BIT(11) /* transmit CPOL (maybe affects CPHA) */
+#define LOCOMO_SPIMD_RCPOL BIT(10) /* receive CPOL (maybe affects CPHA) */
+#define LOCOMO_SPIMD_TDINV BIT(9) /* invert transmit line */
+#define LOCOMO_SPIMD_RDINV BIT(8) /* invert receive line */
+#define LOCOMO_SPIMD_XON BIT(7) /* enable spi controller clock */
+#define LOCOMO_SPIMD_XEN BIT(6) /* clock bit write enable */
+#define LOCOMO_SPIMD_XSEL 0x0018 /* clock select */
+/* xon must be off when enabling xen, wait 300 us before xon -> 1 */
+#define CLOCK_18MHZ 0 /* 18,432 MHz clock */
+#define CLOCK_22MHZ 1 /* 22,5792 MHz clock */
+#define CLOCK_25MHZ 2 /* 24,576 MHz clock */
+#define LOCOMO_SPIMD_CLKSEL 0x7
+#define DIV_1 0 /* don't divide clock */
+#define DIV_2 1 /* divide clock by two */
+#define DIV_4 2 /* divide clock by four */
+#define DIV_8 3 /* divide clock by eight */
+#define DIV_64 4 /* divide clock by 64 */
+
+#define LOCOMO_SPICT 0x64 /* SPI mode control */
+#define LOCOMO_SPICT_CRC16_7_B BIT(15) /* 0: crc16 1: crc7 */
+#define LOCOMO_SPICT_CRCRX_TX_B BIT(14)
+#define LOCOMO_SPICT_CRCRESET_B BIT(13)
+#define LOCOMO_SPICT_CEN BIT(7) /* ?? enable */
+#define LOCOMO_SPICT_CS BIT(6) /* chip select */
+#define LOCOMO_SPICT_UNIT16 BIT(5) /* 0: 8 bit, 1: 16 bit*/
+#define LOCOMO_SPICT_ALIGNEN BIT(2) /* align transfer enable */
+#define LOCOMO_SPICT_RXWEN BIT(1) /* continuous receive */
+#define LOCOMO_SPICT_RXUEN BIT(0) /* aligned receive */
+
+#define LOCOMO_SPIST 0x68 /* SPI status */
+#define LOCOMO_SPI_TEND BIT(3) /* Transfer end bit */
+#define LOCOMO_SPI_REND BIT(2) /* Receive end bit */
+#define LOCOMO_SPI_RFW BIT(1) /* write buffer bit */
+#define LOCOMO_SPI_RFR BIT(0) /* read buffer bit */
+
+#define LOCOMO_SPIIS 0x70 /* SPI interrupt status */
+#define LOCOMO_SPIWE 0x74 /* SPI interrupt status write enable */
+#define LOCOMO_SPIIE 0x78 /* SPI interrupt enable */
+#define LOCOMO_SPIIR 0x7c /* SPI interrupt request */
+#define LOCOMO_SPITD 0x80 /* SPI transfer data write */
+#define LOCOMO_SPIRD 0x84 /* SPI receive data read */
+#define LOCOMO_SPITS 0x88 /* SPI transfer data shift */
+#define LOCOMO_SPIRS 0x8C /* SPI receive data shift */
+
+/* GPIO */
+#define LOCOMO_GPD 0x90 /* GPIO direction */
+#define LOCOMO_GPE 0x94 /* GPIO input enable */
+#define LOCOMO_GPL 0x98 /* GPIO level */
+#define LOCOMO_GPO 0x9c /* GPIO out data setting */
+#define LOCOMO_GRIE 0xa0 /* GPIO rise detection */
+#define LOCOMO_GFIE 0xa4 /* GPIO fall detection */
+#define LOCOMO_GIS 0xa8 /* GPIO edge detection status */
+#define LOCOMO_GWE 0xac /* GPIO status write enable */
+#define LOCOMO_GIE 0xb0 /* GPIO interrupt enable */
+#define LOCOMO_GIR 0xb4 /* GPIO interrupt request */
+
+/* Front light adjustment controller */
+#define LOCOMO_ALS 0xc8 /* Adjust light cycle */
+#define LOCOMO_ALS_EN 0x8000
+#define LOCOMO_ALD 0xcc /* Adjust light duty */
+
+/* PCM audio interface */
+#define LOCOMO_PAIF 0xd0 /* PCM audio interface */
+#define LOCOMO_PAIF_SCINV 0x20
+#define LOCOMO_PAIF_SCEN 0x10
+#define LOCOMO_PAIF_LRCRST 0x08
+#define LOCOMO_PAIF_LRCEVE 0x04
+#define LOCOMO_PAIF_LRCINV 0x02
+#define LOCOMO_PAIF_LRCEN 0x01
+
+/* Long time timer */
+#define LOCOMO_LTC 0xd8 /* LTC interrupt setting */
+#define LOCOMO_LTINT 0xdc /* LTC interrupt */
+
+/* DAC control signal for LCD (COMADJ ) */
+#define LOCOMO_DAC 0xe0
+/* DAC control */
+#define LOCOMO_DAC_SCLOEB 0x08 /* SCL pin output data */
+#define LOCOMO_DAC_TEST 0x04 /* Test bit */
+#define LOCOMO_DAC_SDA 0x02 /* SDA pin level (read-only) */
+#define LOCOMO_DAC_SDAOEB 0x01 /* SDA pin output data */
+
+/* LED controller */
+#define LOCOMO_LPT0 0xe8
+#define LOCOMO_LPT1 0xec
+#define LOCOMO_LPT_TOFH 0x80
+#define LOCOMO_LPT_TOFL 0x08
+#define LOCOMO_LPT_TOH(TOH) ((TOH & 0x7) << 4)
+#define LOCOMO_LPT_TOL(TOL) ((TOL & 0x7))
+
+struct locomo_gpio_platform_data {
+ unsigned int gpio_base;
+};
+
+struct locomo_lcd_platform_data {
+ u8 comadj;
+};
+
+struct locomo_platform_data {
+ unsigned int gpio_base;
+ u8 comadj;
+};
+
+#endif
--
2.1.4
More information about the linux-arm-kernel
mailing list