[PATCH 0/4] meson: Add and enable DTS for Odroid-C1 and Tronfy MXQ

[Carlo Caione]

From: Carlo Caione <carlo at endlessm.com>

This patchset enables Meson8b and add the DTS files for Hardkernel Odroid-C1
and Tronfy MXQ.

Note that the DTS files depend on the header file that is already submitted
with the clock driver patches and already present in the clk tree in the
clk-meson8b branch.

Carlo Caione (4):
  of: documentation: Add vedor prefix for Hardkernel and Tronfy
  of: documentation: add bindings documentation for Meson8b
  ARM: meson: Add DTS for Odroid-C1 and Tronfy MXQ boards
  ARM: meson: Enable Meson8b SoCs

 Documentation/devicetree/bindings/arm/amlogic.txt  |   6 +
 .../devicetree/bindings/vendor-prefixes.txt        |   2 +
 arch/arm/boot/dts/Makefile                         |   3 +
 arch/arm/boot/dts/meson8b-mxq.dts                  |  65 +++++++++
 arch/arm/boot/dts/meson8b-odroidc1.dts             |  65 +++++++++
 arch/arm/boot/dts/meson8b.dtsi                     | 151 +++++++++++++++++++++
 arch/arm/mach-meson/Kconfig                        |   5 +
 arch/arm/mach-meson/meson.c                        |   1 +
 8 files changed, 298 insertions(+)
 create mode 100644 arch/arm/boot/dts/meson8b-mxq.dts
 create mode 100644 arch/arm/boot/dts/meson8b-odroidc1.dts
 create mode 100644 arch/arm/boot/dts/meson8b.dtsi

-- 
1.9.1